Tarantool development patches archive
 help / color / mirror / Atom feed
* [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
@ 2021-07-23  7:54 Mergen Imeev via Tarantool-patches
  2021-07-26 20:58 ` Vladislav Shpilevoy via Tarantool-patches
  0 siblings, 1 reply; 18+ messages in thread
From: Mergen Imeev via Tarantool-patches @ 2021-07-23  7:54 UTC (permalink / raw)
  To: v.shpilevoy; +Cc: tarantool-patches

This opcode was used to convert INTEGER values to REAL. It is not
necessary in Tarantool and causes errors.

Due to OP_Realify two type of errors appeared:
1) In some cases in trigger INTEGER may be converted to DOUBLE.
For example:
box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t SET n = new.n; END;")
box.execute("INSERT INTO t VALUES (1, 1);")
box.execute("SELECT i / 2, n / 2 FROM t;")

Result:
tarantool> box.execute("SELECT i / 2, n / 2 FROM t;")
---
- metadata:
  - name: COLUMN_1
    type: number
  - name: COLUMN_2
    type: number
  rows:
  - [0, 0.5]
...

2) If SELECT uses GROUP BY then it may return DOUBLE instead of INTEGER.
For example:
box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
box.execute("INSERT INTO t VALUES (1,1);")
box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")

Result:
tarantool> box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
---
- metadata:
  - name: COLUMN_1
    type: number
  - name: COLUMN_2
    type: number
  rows:
  - [0.5, 0.5]
...

This patch removes OP_Realify, after which these errors disappear.

Closes #5335
---
https://github.com/tarantool/tarantool/issues/5335
https://github.com/tarantool/tarantool/tree/imeevma/gh-5335-remove-op-realify

 src/box/sql/expr.c                            | 13 -------
 src/box/sql/vdbe.c                            | 17 --------
 .../gh-5335-wrong-int-to-double-cast.test.lua | 39 +++++++++++++++++++
 3 files changed, 39 insertions(+), 30 deletions(-)
 create mode 100755 test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua

diff --git a/src/box/sql/expr.c b/src/box/sql/expr.c
index 3772596d6..d2624516c 100644
--- a/src/box/sql/expr.c
+++ b/src/box/sql/expr.c
@@ -3700,11 +3700,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				sqlVdbeAddOp3(v, OP_Column,
 						  pAggInfo->sortingIdxPTab,
 						  pCol->iSorterColumn, target);
-				if (pCol->space_def->fields[pExpr->iAgg].type ==
-				    FIELD_TYPE_NUMBER) {
-					sqlVdbeAddOp1(v, OP_Realify,
-							  target);
-				}
 				return target;
 			}
 			/*
@@ -4260,14 +4255,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				    (pExpr->iTable ? "new" : "old"),
 				    pExpr->space_def->fields[
 					pExpr->iColumn].name, target));
-
-			/* If the column has type NUMBER, it may currently be stored as an
-			 * integer. Use OP_Realify to make sure it is really real.
-			 */
-			if (pExpr->iColumn >= 0 && def->fields[
-				pExpr->iColumn].type == FIELD_TYPE_NUMBER) {
-				sqlVdbeAddOp1(v, OP_Realify, target);
-			}
 			break;
 		}
 
diff --git a/src/box/sql/vdbe.c b/src/box/sql/vdbe.c
index 9e763ed85..0a3c904b1 100644
--- a/src/box/sql/vdbe.c
+++ b/src/box/sql/vdbe.c
@@ -1445,23 +1445,6 @@ case OP_MustBeInt: {            /* jump, in1 */
 	break;
 }
 
-/* Opcode: Realify P1 * * * *
- *
- * If register P1 holds an integer convert it to a real value.
- *
- * This opcode is used when extracting information from a column that
- * has float type.  Such column values may still be stored as
- * integers, for space efficiency, but after extraction we want them
- * to have only a real value.
- */
-case OP_Realify: {                  /* in1 */
-	pIn1 = &aMem[pOp->p1];
-	if (mem_is_int(pIn1)) {
-		mem_to_double(pIn1);
-	}
-	break;
-}
-
 /* Opcode: Cast P1 P2 * * *
  * Synopsis: type(r[P1])
  *
diff --git a/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
new file mode 100755
index 000000000..efcae911c
--- /dev/null
+++ b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
@@ -0,0 +1,39 @@
+#!/usr/bin/env tarantool
+local test = require("sqltester")
+test:plan(2)
+
+test:execsql([[
+    CREATE TABLE t1 (i NUMBER PRIMARY KEY, n NUMBER);
+    CREATE TABLE t2 (i NUMBER PRIMARY KEY, n NUMBER);
+    CREATE TRIGGER r AFTER INSERT ON t1 FOR EACH ROW BEGIN UPDATE t1 SET n = new.n; END;
+    INSERT INTO t1 VALUES (1, 1);
+    INSERT INTO t2 VALUES (1, 1);
+]])
+
+--
+-- Make sure that implicit cast from string to integer works correctly in
+-- arithmetic operations.
+--
+test:do_execsql_test(
+    "gh-5335-1",
+    [[
+        SELECT i / 2, n / 2 FROM t1;
+    ]], {
+        0, 0
+    })
+
+test:do_execsql_test(
+    "gh-5335-2",
+    [[
+        SELECT i / 2, n / 2 FROM t2 GROUP BY n;
+    ]], {
+        0, 0
+    })
+
+test:execsql([[
+    DROP TRIGGER r;
+    DROP TABLE t1;
+    DROP TABLE t2;
+]])
+
+test:finish_test()
-- 
2.25.1


^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
  2021-07-23  7:54 [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify Mergen Imeev via Tarantool-patches
@ 2021-07-26 20:58 ` Vladislav Shpilevoy via Tarantool-patches
  2021-07-27  8:53   ` Mergen Imeev via Tarantool-patches
  0 siblings, 1 reply; 18+ messages in thread
From: Vladislav Shpilevoy via Tarantool-patches @ 2021-07-26 20:58 UTC (permalink / raw)
  To: imeevma; +Cc: tarantool-patches

Thanks for the patch!

See 2 comments below.

>  src/box/sql/expr.c                            | 13 -------
>  src/box/sql/vdbe.c                            | 17 --------
>  .../gh-5335-wrong-int-to-double-cast.test.lua | 39 +++++++++++++++++++

1. Please, add a changelog file.

> diff --git a/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
> new file mode 100755
> index 000000000..efcae911c
> --- /dev/null
> +++ b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
> @@ -0,0 +1,39 @@
> +#!/usr/bin/env tarantool
> +local test = require("sqltester")
> +test:plan(2)
> +
> +test:execsql([[
> +    CREATE TABLE t1 (i NUMBER PRIMARY KEY, n NUMBER);
> +    CREATE TABLE t2 (i NUMBER PRIMARY KEY, n NUMBER);
> +    CREATE TRIGGER r AFTER INSERT ON t1 FOR EACH ROW BEGIN UPDATE t1 SET n = new.n; END;
> +    INSERT INTO t1 VALUES (1, 1);
> +    INSERT INTO t2 VALUES (1, 1);
> +]])
> +
> +--
> +-- Make sure that implicit cast from string to integer works correctly in
> +-- arithmetic operations.

2. From string to integer? Where are the strings?

> +--
> +test:do_execsql_test(
> +    "gh-5335-1",
> +    [[
> +        SELECT i / 2, n / 2 FROM t1;
> +    ]], {
> +        0, 0
> +    })
> +
> +test:do_execsql_test(
> +    "gh-5335-2",
> +    [[
> +        SELECT i / 2, n / 2 FROM t2 GROUP BY n;
> +    ]], {
> +        0, 0
> +    })
> +
> +test:execsql([[
> +    DROP TRIGGER r;
> +    DROP TABLE t1;
> +    DROP TABLE t2;
> +]])
> +
> +test:finish_test()
> 

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
  2021-07-26 20:58 ` Vladislav Shpilevoy via Tarantool-patches
@ 2021-07-27  8:53   ` Mergen Imeev via Tarantool-patches
  2021-07-28 21:59     ` Vladislav Shpilevoy via Tarantool-patches
  0 siblings, 1 reply; 18+ messages in thread
From: Mergen Imeev via Tarantool-patches @ 2021-07-27  8:53 UTC (permalink / raw)
  To: Vladislav Shpilevoy; +Cc: tarantool-patches

Hi! Thank you for the review! My answers, diff and new patch below.

On Mon, Jul 26, 2021 at 10:58:05PM +0200, Vladislav Shpilevoy wrote:
> Thanks for the patch!
> 
> See 2 comments below.
> 
> >  src/box/sql/expr.c                            | 13 -------
> >  src/box/sql/vdbe.c                            | 17 --------
> >  .../gh-5335-wrong-int-to-double-cast.test.lua | 39 +++++++++++++++++++
> 
> 1. Please, add a changelog file.
> 
Added.

> > diff --git a/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
> > new file mode 100755
> > index 000000000..efcae911c
> > --- /dev/null
> > +++ b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
> > @@ -0,0 +1,39 @@
> > +#!/usr/bin/env tarantool
> > +local test = require("sqltester")
> > +test:plan(2)
> > +
> > +test:execsql([[
> > +    CREATE TABLE t1 (i NUMBER PRIMARY KEY, n NUMBER);
> > +    CREATE TABLE t2 (i NUMBER PRIMARY KEY, n NUMBER);
> > +    CREATE TRIGGER r AFTER INSERT ON t1 FOR EACH ROW BEGIN UPDATE t1 SET n = new.n; END;
> > +    INSERT INTO t1 VALUES (1, 1);
> > +    INSERT INTO t2 VALUES (1, 1);
> > +]])
> > +
> > +--
> > +-- Make sure that implicit cast from string to integer works correctly in
> > +-- arithmetic operations.
> 
> 2. From string to integer? Where are the strings?
> 
Fixed. Most likely I forgot to change this comment after I copied tests to use
as a template.

> > +--
> > +test:do_execsql_test(
> > +    "gh-5335-1",
> > +    [[
> > +        SELECT i / 2, n / 2 FROM t1;
> > +    ]], {
> > +        0, 0
> > +    })
> > +
> > +test:do_execsql_test(
> > +    "gh-5335-2",
> > +    [[
> > +        SELECT i / 2, n / 2 FROM t2 GROUP BY n;
> > +    ]], {
> > +        0, 0
> > +    })
> > +
> > +test:execsql([[
> > +    DROP TRIGGER r;
> > +    DROP TABLE t1;
> > +    DROP TABLE t2;
> > +]])
> > +
> > +test:finish_test()
> > 

Diff:

diff --git a/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
new file mode 100644
index 000000000..b06805a7f
--- /dev/null
+++ b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
@@ -0,0 +1,4 @@
+## bugfix/sql
+
+* Removed spontaneous conversion from INTEGER to DOUBLE in a field of type
+  NUMBER (gh-5335).
diff --git a/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
index efcae911c..d29324a28 100755
--- a/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
+++ b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
@@ -11,8 +11,8 @@ test:execsql([[
 ]])
 
 --
--- Make sure that implicit cast from string to integer works correctly in
--- arithmetic operations.
+-- Make sure that there are no unnecesary INTEGER to DOUBLE implicit cast in
+-- field of type NUMBER.
 --
 test:do_execsql_test(
     "gh-5335-1",



Patch:


commit f15e1aefdd7cafd380e66f7b5acdafb7ae5bdca6
Author: Mergen Imeev <imeevma@gmail.com>
Date:   Sat Sep 26 12:43:18 2020 +0300

    sql: remove OP_Realify
    
    This opcode was used to convert INTEGER values to REAL. It is not
    necessary in Tarantool and causes errors.
    
    Due to OP_Realify two type of errors appeared:
    1) In some cases in trigger INTEGER may be converted to DOUBLE.
    For example:
    box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
    box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t SET n = new.n; END;")
    box.execute("INSERT INTO t VALUES (1, 1);")
    box.execute("SELECT i / 2, n / 2 FROM t;")
    
    Result:
    tarantool> box.execute("SELECT i / 2, n / 2 FROM t;")
    ---
    - metadata:
      - name: COLUMN_1
        type: number
      - name: COLUMN_2
        type: number
      rows:
      - [0, 0.5]
    ...
    
    2) If SELECT uses GROUP BY then it may return DOUBLE instead of INTEGER.
    For example:
    box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
    box.execute("INSERT INTO t VALUES (1,1);")
    box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
    
    Result:
    tarantool> box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
    ---
    - metadata:
      - name: COLUMN_1
        type: number
      - name: COLUMN_2
        type: number
      rows:
      - [0.5, 0.5]
    ...
    
    This patch removes OP_Realify, after which these errors disappear.
    
    Closes #5335

diff --git a/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
new file mode 100644
index 000000000..b06805a7f
--- /dev/null
+++ b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
@@ -0,0 +1,4 @@
+## bugfix/sql
+
+* Removed spontaneous conversion from INTEGER to DOUBLE in a field of type
+  NUMBER (gh-5335).
diff --git a/src/box/sql/expr.c b/src/box/sql/expr.c
index 3772596d6..d2624516c 100644
--- a/src/box/sql/expr.c
+++ b/src/box/sql/expr.c
@@ -3700,11 +3700,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				sqlVdbeAddOp3(v, OP_Column,
 						  pAggInfo->sortingIdxPTab,
 						  pCol->iSorterColumn, target);
-				if (pCol->space_def->fields[pExpr->iAgg].type ==
-				    FIELD_TYPE_NUMBER) {
-					sqlVdbeAddOp1(v, OP_Realify,
-							  target);
-				}
 				return target;
 			}
 			/*
@@ -4260,14 +4255,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				    (pExpr->iTable ? "new" : "old"),
 				    pExpr->space_def->fields[
 					pExpr->iColumn].name, target));
-
-			/* If the column has type NUMBER, it may currently be stored as an
-			 * integer. Use OP_Realify to make sure it is really real.
-			 */
-			if (pExpr->iColumn >= 0 && def->fields[
-				pExpr->iColumn].type == FIELD_TYPE_NUMBER) {
-				sqlVdbeAddOp1(v, OP_Realify, target);
-			}
 			break;
 		}
 
diff --git a/src/box/sql/vdbe.c b/src/box/sql/vdbe.c
index 9e763ed85..0a3c904b1 100644
--- a/src/box/sql/vdbe.c
+++ b/src/box/sql/vdbe.c
@@ -1445,23 +1445,6 @@ case OP_MustBeInt: {            /* jump, in1 */
 	break;
 }
 
-/* Opcode: Realify P1 * * * *
- *
- * If register P1 holds an integer convert it to a real value.
- *
- * This opcode is used when extracting information from a column that
- * has float type.  Such column values may still be stored as
- * integers, for space efficiency, but after extraction we want them
- * to have only a real value.
- */
-case OP_Realify: {                  /* in1 */
-	pIn1 = &aMem[pOp->p1];
-	if (mem_is_int(pIn1)) {
-		mem_to_double(pIn1);
-	}
-	break;
-}
-
 /* Opcode: Cast P1 P2 * * *
  * Synopsis: type(r[P1])
  *
diff --git a/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
new file mode 100755
index 000000000..d29324a28
--- /dev/null
+++ b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
@@ -0,0 +1,39 @@
+#!/usr/bin/env tarantool
+local test = require("sqltester")
+test:plan(2)
+
+test:execsql([[
+    CREATE TABLE t1 (i NUMBER PRIMARY KEY, n NUMBER);
+    CREATE TABLE t2 (i NUMBER PRIMARY KEY, n NUMBER);
+    CREATE TRIGGER r AFTER INSERT ON t1 FOR EACH ROW BEGIN UPDATE t1 SET n = new.n; END;
+    INSERT INTO t1 VALUES (1, 1);
+    INSERT INTO t2 VALUES (1, 1);
+]])
+
+--
+-- Make sure that there are no unnecesary INTEGER to DOUBLE implicit cast in
+-- field of type NUMBER.
+--
+test:do_execsql_test(
+    "gh-5335-1",
+    [[
+        SELECT i / 2, n / 2 FROM t1;
+    ]], {
+        0, 0
+    })
+
+test:do_execsql_test(
+    "gh-5335-2",
+    [[
+        SELECT i / 2, n / 2 FROM t2 GROUP BY n;
+    ]], {
+        0, 0
+    })
+
+test:execsql([[
+    DROP TRIGGER r;
+    DROP TABLE t1;
+    DROP TABLE t2;
+]])
+
+test:finish_test()

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
  2021-07-27  8:53   ` Mergen Imeev via Tarantool-patches
@ 2021-07-28 21:59     ` Vladislav Shpilevoy via Tarantool-patches
  0 siblings, 0 replies; 18+ messages in thread
From: Vladislav Shpilevoy via Tarantool-patches @ 2021-07-28 21:59 UTC (permalink / raw)
  To: Mergen Imeev; +Cc: tarantool-patches

Thanks for the patch!

LGTM.

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
  2021-08-04  8:30 Mergen Imeev via Tarantool-patches
  2021-08-04 14:08 ` Kirill Yukhin via Tarantool-patches
@ 2021-08-05  9:38 ` Kirill Yukhin via Tarantool-patches
  1 sibling, 0 replies; 18+ messages in thread
From: Kirill Yukhin via Tarantool-patches @ 2021-08-05  9:38 UTC (permalink / raw)
  To: imeevma; +Cc: tarantool-patches

Hello,

On 04 авг 11:30, imeevma@tarantool.org wrote:
> This opcode was used to convert INTEGER values to REAL. It is not
> necessary in Tarantool and causes errors.
> 
> Due to OP_Realify two type of errors appeared:
> 1) In some cases in trigger INTEGER may be converted to DOUBLE.
> For example:
> box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
> box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t SET n = new.n; END;")
> box.execute("INSERT INTO t VALUES (1, 1);")
> box.execute("SELECT i / 2, n / 2 FROM t;")
> 
> Result:
> tarantool> box.execute("SELECT i / 2, n / 2 FROM t;")
> ---
> - metadata:
>   - name: COLUMN_1
>     type: number
>   - name: COLUMN_2
>     type: number
>   rows:
>   - [0, 0.5]
> ...
> 
> 2) If SELECT uses GROUP BY then it may return DOUBLE instead of INTEGER.
> For example:
> box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
> box.execute("INSERT INTO t VALUES (1,1);")
> box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
> 
> Result:
> tarantool> box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
> ---
> - metadata:
>   - name: COLUMN_1
>     type: number
>   - name: COLUMN_2
>     type: number
>   rows:
>   - [0.5, 0.5]
> ...
> 
> This patch removes OP_Realify, after which these errors disappear.
> 
> Closes #5335
> ---
> https://github.com/tarantool/tarantool/issues/5335
> https://github.com/tarantool/tarantool/tree/imeevma/gh-5335-remove-op-realify

I've checked your patch into 2.7, 2.8 and master.

--
Regards, Kirill Yukhin

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [Tarantool-patches]  [PATCH v1 1/1] sql: remove OP_Realify
  2021-08-04 14:08 ` Kirill Yukhin via Tarantool-patches
@ 2021-08-04 16:11   ` Vitaliia Ioffe via Tarantool-patches
  0 siblings, 0 replies; 18+ messages in thread
From: Vitaliia Ioffe via Tarantool-patches @ 2021-08-04 16:11 UTC (permalink / raw)
  To: tarantool-patches

[-- Attachment #1: Type: text/plain, Size: 1712 bytes --]


Hi team, 
 
QA LGTM
 
 
--
Vitaliia Ioffe
 
  
>Среда, 4 августа 2021, 17:08 +03:00 от Kirill Yukhin via Tarantool-patches <tarantool-patches@dev.tarantool.org>:
> 
>Hello,
>
>On 04 авг 11:30,  imeevma@tarantool.org wrote:
>> This opcode was used to convert INTEGER values to REAL. It is not
>> necessary in Tarantool and causes errors.
>>
>> Due to OP_Realify two type of errors appeared:
>> 1) In some cases in trigger INTEGER may be converted to DOUBLE.
>> For example:
>> box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
>> box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t SET n = new.n; END;")
>> box.execute("INSERT INTO t VALUES (1, 1);")
>> box.execute("SELECT i / 2, n / 2 FROM t;")
>>
>> Result:
>> tarantool> box.execute("SELECT i / 2, n / 2 FROM t;")
>> ---
>> - metadata:
>> - name: COLUMN_1
>> type: number
>> - name: COLUMN_2
>> type: number
>> rows:
>> - [0, 0.5]
>> ...
>>
>> 2) If SELECT uses GROUP BY then it may return DOUBLE instead of INTEGER.
>> For example:
>> box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
>> box.execute("INSERT INTO t VALUES (1,1);")
>> box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
>>
>> Result:
>> tarantool> box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
>> ---
>> - metadata:
>> - name: COLUMN_1
>> type: number
>> - name: COLUMN_2
>> type: number
>> rows:
>> - [0.5, 0.5]
>> ...
>>
>> This patch removes OP_Realify, after which these errors disappear.
>>
>> Closes #5335
>> ---
>>  https://github.com/tarantool/tarantool/issues/5335
>>  https://github.com/tarantool/tarantool/tree/imeevma/gh-5335-remove-op-realify
>The patch LGTM.
>
>--
>Regards, Kirill Yukhin
 

[-- Attachment #2: Type: text/html, Size: 2695 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
  2021-08-04  8:30 Mergen Imeev via Tarantool-patches
@ 2021-08-04 14:08 ` Kirill Yukhin via Tarantool-patches
  2021-08-04 16:11   ` Vitaliia Ioffe via Tarantool-patches
  2021-08-05  9:38 ` Kirill Yukhin via Tarantool-patches
  1 sibling, 1 reply; 18+ messages in thread
From: Kirill Yukhin via Tarantool-patches @ 2021-08-04 14:08 UTC (permalink / raw)
  To: imeevma; +Cc: tarantool-patches

Hello,

On 04 авг 11:30, imeevma@tarantool.org wrote:
> This opcode was used to convert INTEGER values to REAL. It is not
> necessary in Tarantool and causes errors.
> 
> Due to OP_Realify two type of errors appeared:
> 1) In some cases in trigger INTEGER may be converted to DOUBLE.
> For example:
> box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
> box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t SET n = new.n; END;")
> box.execute("INSERT INTO t VALUES (1, 1);")
> box.execute("SELECT i / 2, n / 2 FROM t;")
> 
> Result:
> tarantool> box.execute("SELECT i / 2, n / 2 FROM t;")
> ---
> - metadata:
>   - name: COLUMN_1
>     type: number
>   - name: COLUMN_2
>     type: number
>   rows:
>   - [0, 0.5]
> ...
> 
> 2) If SELECT uses GROUP BY then it may return DOUBLE instead of INTEGER.
> For example:
> box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
> box.execute("INSERT INTO t VALUES (1,1);")
> box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
> 
> Result:
> tarantool> box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
> ---
> - metadata:
>   - name: COLUMN_1
>     type: number
>   - name: COLUMN_2
>     type: number
>   rows:
>   - [0.5, 0.5]
> ...
> 
> This patch removes OP_Realify, after which these errors disappear.
> 
> Closes #5335
> ---
> https://github.com/tarantool/tarantool/issues/5335
> https://github.com/tarantool/tarantool/tree/imeevma/gh-5335-remove-op-realify

The patch LGTM.

--
Regards, Kirill Yukhin

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
@ 2021-08-04  8:30 Mergen Imeev via Tarantool-patches
  2021-08-04 14:08 ` Kirill Yukhin via Tarantool-patches
  2021-08-05  9:38 ` Kirill Yukhin via Tarantool-patches
  0 siblings, 2 replies; 18+ messages in thread
From: Mergen Imeev via Tarantool-patches @ 2021-08-04  8:30 UTC (permalink / raw)
  To: kyukhin; +Cc: tarantool-patches

This opcode was used to convert INTEGER values to REAL. It is not
necessary in Tarantool and causes errors.

Due to OP_Realify two type of errors appeared:
1) In some cases in trigger INTEGER may be converted to DOUBLE.
For example:
box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t SET n = new.n; END;")
box.execute("INSERT INTO t VALUES (1, 1);")
box.execute("SELECT i / 2, n / 2 FROM t;")

Result:
tarantool> box.execute("SELECT i / 2, n / 2 FROM t;")
---
- metadata:
  - name: COLUMN_1
    type: number
  - name: COLUMN_2
    type: number
  rows:
  - [0, 0.5]
...

2) If SELECT uses GROUP BY then it may return DOUBLE instead of INTEGER.
For example:
box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
box.execute("INSERT INTO t VALUES (1,1);")
box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")

Result:
tarantool> box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
---
- metadata:
  - name: COLUMN_1
    type: number
  - name: COLUMN_2
    type: number
  rows:
  - [0.5, 0.5]
...

This patch removes OP_Realify, after which these errors disappear.

Closes #5335
---
https://github.com/tarantool/tarantool/issues/5335
https://github.com/tarantool/tarantool/tree/imeevma/gh-5335-remove-op-realify

 ...gh-5335-remove-wrong-double-to-int-cast.md |  4 ++
 src/box/sql/expr.c                            | 13 ------
 src/box/sql/vdbe.c                            | 17 --------
 .../gh-5335-wrong-int-to-double-cast.test.lua | 40 +++++++++++++++++++
 4 files changed, 44 insertions(+), 30 deletions(-)
 create mode 100644 changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
 create mode 100755 test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua

diff --git a/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
new file mode 100644
index 000000000..b06805a7f
--- /dev/null
+++ b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
@@ -0,0 +1,4 @@
+## bugfix/sql
+
+* Removed spontaneous conversion from INTEGER to DOUBLE in a field of type
+  NUMBER (gh-5335).
diff --git a/src/box/sql/expr.c b/src/box/sql/expr.c
index 3772596d6..d2624516c 100644
--- a/src/box/sql/expr.c
+++ b/src/box/sql/expr.c
@@ -3700,11 +3700,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				sqlVdbeAddOp3(v, OP_Column,
 						  pAggInfo->sortingIdxPTab,
 						  pCol->iSorterColumn, target);
-				if (pCol->space_def->fields[pExpr->iAgg].type ==
-				    FIELD_TYPE_NUMBER) {
-					sqlVdbeAddOp1(v, OP_Realify,
-							  target);
-				}
 				return target;
 			}
 			/*
@@ -4260,14 +4255,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				    (pExpr->iTable ? "new" : "old"),
 				    pExpr->space_def->fields[
 					pExpr->iColumn].name, target));
-
-			/* If the column has type NUMBER, it may currently be stored as an
-			 * integer. Use OP_Realify to make sure it is really real.
-			 */
-			if (pExpr->iColumn >= 0 && def->fields[
-				pExpr->iColumn].type == FIELD_TYPE_NUMBER) {
-				sqlVdbeAddOp1(v, OP_Realify, target);
-			}
 			break;
 		}
 
diff --git a/src/box/sql/vdbe.c b/src/box/sql/vdbe.c
index 9e763ed85..0a3c904b1 100644
--- a/src/box/sql/vdbe.c
+++ b/src/box/sql/vdbe.c
@@ -1445,23 +1445,6 @@ case OP_MustBeInt: {            /* jump, in1 */
 	break;
 }
 
-/* Opcode: Realify P1 * * * *
- *
- * If register P1 holds an integer convert it to a real value.
- *
- * This opcode is used when extracting information from a column that
- * has float type.  Such column values may still be stored as
- * integers, for space efficiency, but after extraction we want them
- * to have only a real value.
- */
-case OP_Realify: {                  /* in1 */
-	pIn1 = &aMem[pOp->p1];
-	if (mem_is_int(pIn1)) {
-		mem_to_double(pIn1);
-	}
-	break;
-}
-
 /* Opcode: Cast P1 P2 * * *
  * Synopsis: type(r[P1])
  *
diff --git a/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
new file mode 100755
index 000000000..76daa45e9
--- /dev/null
+++ b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
@@ -0,0 +1,40 @@
+#!/usr/bin/env tarantool
+local test = require("sqltester")
+test:plan(2)
+
+test:execsql([[
+    CREATE TABLE t1 (i NUMBER PRIMARY KEY, n NUMBER);
+    CREATE TABLE t2 (i NUMBER PRIMARY KEY, n NUMBER);
+    -- This trigger is only needed to reproduce the error.
+    CREATE TRIGGER r AFTER INSERT ON t1 FOR EACH ROW BEGIN UPDATE t1 SET n = new.n; END;
+    INSERT INTO t1 VALUES (1, 1);
+    INSERT INTO t2 VALUES (1, 1);
+]])
+
+--
+-- Make sure that there are no unnecesary INTEGER to DOUBLE implicit cast in
+-- field of type NUMBER.
+--
+test:do_execsql_test(
+    "gh-5335-1",
+    [[
+        SELECT i / 2, n / 2 FROM t1;
+    ]], {
+        0, 0
+    })
+
+test:do_execsql_test(
+    "gh-5335-2",
+    [[
+        SELECT i / 2, n / 2 FROM t2 GROUP BY n;
+    ]], {
+        0, 0
+    })
+
+test:execsql([[
+    DROP TRIGGER r;
+    DROP TABLE t1;
+    DROP TABLE t2;
+]])
+
+test:finish_test()
-- 
2.25.1


^ permalink raw reply	[flat|nested] 18+ messages in thread

* [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
@ 2021-08-02 18:09 Mergen Imeev via Tarantool-patches
  0 siblings, 0 replies; 18+ messages in thread
From: Mergen Imeev via Tarantool-patches @ 2021-08-02 18:09 UTC (permalink / raw)
  To: imun; +Cc: tarantool-patches

This opcode was used to convert INTEGER values to REAL. It is not
necessary in Tarantool and causes errors.

Due to OP_Realify two type of errors appeared:
1) In some cases in trigger INTEGER may be converted to DOUBLE.
For example:
box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t SET n = new.n; END;")
box.execute("INSERT INTO t VALUES (1, 1);")
box.execute("SELECT i / 2, n / 2 FROM t;")

Result:
tarantool> box.execute("SELECT i / 2, n / 2 FROM t;")
---
- metadata:
  - name: COLUMN_1
    type: number
  - name: COLUMN_2
    type: number
  rows:
  - [0, 0.5]
...

2) If SELECT uses GROUP BY then it may return DOUBLE instead of INTEGER.
For example:
box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
box.execute("INSERT INTO t VALUES (1,1);")
box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")

Result:
tarantool> box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
---
- metadata:
  - name: COLUMN_1
    type: number
  - name: COLUMN_2
    type: number
  rows:
  - [0.5, 0.5]
...

This patch removes OP_Realify, after which these errors disappear.

Closes #5335
---

https://github.com/tarantool/tarantool/issues/5335
https://github.com/tarantool/tarantool/tree/imeevma/gh-5335-remove-op-realify

 ...gh-5335-remove-wrong-double-to-int-cast.md |  4 ++
 src/box/sql/expr.c                            | 13 ------
 src/box/sql/vdbe.c                            | 17 --------
 .../gh-5335-wrong-int-to-double-cast.test.lua | 40 +++++++++++++++++++
 4 files changed, 44 insertions(+), 30 deletions(-)
 create mode 100644 changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
 create mode 100755 test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua

diff --git a/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
new file mode 100644
index 000000000..b06805a7f
--- /dev/null
+++ b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
@@ -0,0 +1,4 @@
+## bugfix/sql
+
+* Removed spontaneous conversion from INTEGER to DOUBLE in a field of type
+  NUMBER (gh-5335).
diff --git a/src/box/sql/expr.c b/src/box/sql/expr.c
index 3772596d6..d2624516c 100644
--- a/src/box/sql/expr.c
+++ b/src/box/sql/expr.c
@@ -3700,11 +3700,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				sqlVdbeAddOp3(v, OP_Column,
 						  pAggInfo->sortingIdxPTab,
 						  pCol->iSorterColumn, target);
-				if (pCol->space_def->fields[pExpr->iAgg].type ==
-				    FIELD_TYPE_NUMBER) {
-					sqlVdbeAddOp1(v, OP_Realify,
-							  target);
-				}
 				return target;
 			}
 			/*
@@ -4260,14 +4255,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				    (pExpr->iTable ? "new" : "old"),
 				    pExpr->space_def->fields[
 					pExpr->iColumn].name, target));
-
-			/* If the column has type NUMBER, it may currently be stored as an
-			 * integer. Use OP_Realify to make sure it is really real.
-			 */
-			if (pExpr->iColumn >= 0 && def->fields[
-				pExpr->iColumn].type == FIELD_TYPE_NUMBER) {
-				sqlVdbeAddOp1(v, OP_Realify, target);
-			}
 			break;
 		}
 
diff --git a/src/box/sql/vdbe.c b/src/box/sql/vdbe.c
index 9e763ed85..0a3c904b1 100644
--- a/src/box/sql/vdbe.c
+++ b/src/box/sql/vdbe.c
@@ -1445,23 +1445,6 @@ case OP_MustBeInt: {            /* jump, in1 */
 	break;
 }
 
-/* Opcode: Realify P1 * * * *
- *
- * If register P1 holds an integer convert it to a real value.
- *
- * This opcode is used when extracting information from a column that
- * has float type.  Such column values may still be stored as
- * integers, for space efficiency, but after extraction we want them
- * to have only a real value.
- */
-case OP_Realify: {                  /* in1 */
-	pIn1 = &aMem[pOp->p1];
-	if (mem_is_int(pIn1)) {
-		mem_to_double(pIn1);
-	}
-	break;
-}
-
 /* Opcode: Cast P1 P2 * * *
  * Synopsis: type(r[P1])
  *
diff --git a/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
new file mode 100755
index 000000000..76daa45e9
--- /dev/null
+++ b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
@@ -0,0 +1,40 @@
+#!/usr/bin/env tarantool
+local test = require("sqltester")
+test:plan(2)
+
+test:execsql([[
+    CREATE TABLE t1 (i NUMBER PRIMARY KEY, n NUMBER);
+    CREATE TABLE t2 (i NUMBER PRIMARY KEY, n NUMBER);
+    -- This trigger is only needed to reproduce the error.
+    CREATE TRIGGER r AFTER INSERT ON t1 FOR EACH ROW BEGIN UPDATE t1 SET n = new.n; END;
+    INSERT INTO t1 VALUES (1, 1);
+    INSERT INTO t2 VALUES (1, 1);
+]])
+
+--
+-- Make sure that there are no unnecesary INTEGER to DOUBLE implicit cast in
+-- field of type NUMBER.
+--
+test:do_execsql_test(
+    "gh-5335-1",
+    [[
+        SELECT i / 2, n / 2 FROM t1;
+    ]], {
+        0, 0
+    })
+
+test:do_execsql_test(
+    "gh-5335-2",
+    [[
+        SELECT i / 2, n / 2 FROM t2 GROUP BY n;
+    ]], {
+        0, 0
+    })
+
+test:execsql([[
+    DROP TRIGGER r;
+    DROP TABLE t1;
+    DROP TABLE t2;
+]])
+
+test:finish_test()
-- 
2.25.1


^ permalink raw reply	[flat|nested] 18+ messages in thread

* [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
@ 2021-07-30  7:25 Mergen Imeev via Tarantool-patches
  0 siblings, 0 replies; 18+ messages in thread
From: Mergen Imeev via Tarantool-patches @ 2021-07-30  7:25 UTC (permalink / raw)
  To: imun; +Cc: tarantool-patches

This opcode was used to convert INTEGER values to REAL. It is not
necessary in Tarantool and causes errors.

Due to OP_Realify two type of errors appeared:
1) In some cases in trigger INTEGER may be converted to DOUBLE.
For example:
box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t SET n = new.n; END;")
box.execute("INSERT INTO t VALUES (1, 1);")
box.execute("SELECT i / 2, n / 2 FROM t;")

Result:
tarantool> box.execute("SELECT i / 2, n / 2 FROM t;")
---
- metadata:
  - name: COLUMN_1
    type: number
  - name: COLUMN_2
    type: number
  rows:
  - [0, 0.5]
...

2) If SELECT uses GROUP BY then it may return DOUBLE instead of INTEGER.
For example:
box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
box.execute("INSERT INTO t VALUES (1,1);")
box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")

Result:
tarantool> box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
---
- metadata:
  - name: COLUMN_1
    type: number
  - name: COLUMN_2
    type: number
  rows:
  - [0.5, 0.5]
...

This patch removes OP_Realify, after which these errors disappear.

Closes #5335
---
https://github.com/tarantool/tarantool/issues/5335
https://github.com/tarantool/tarantool/tree/imeevma/gh-5335-remove-op-realify

 ...gh-5335-remove-wrong-double-to-int-cast.md |  4 ++
 src/box/sql/expr.c                            | 13 -------
 src/box/sql/vdbe.c                            | 17 --------
 .../gh-5335-wrong-int-to-double-cast.test.lua | 39 +++++++++++++++++++
 4 files changed, 43 insertions(+), 30 deletions(-)
 create mode 100644 changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
 create mode 100755 test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua

diff --git a/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
new file mode 100644
index 000000000..b06805a7f
--- /dev/null
+++ b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
@@ -0,0 +1,4 @@
+## bugfix/sql
+
+* Removed spontaneous conversion from INTEGER to DOUBLE in a field of type
+  NUMBER (gh-5335).
diff --git a/src/box/sql/expr.c b/src/box/sql/expr.c
index 3772596d6..d2624516c 100644
--- a/src/box/sql/expr.c
+++ b/src/box/sql/expr.c
@@ -3700,11 +3700,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				sqlVdbeAddOp3(v, OP_Column,
 						  pAggInfo->sortingIdxPTab,
 						  pCol->iSorterColumn, target);
-				if (pCol->space_def->fields[pExpr->iAgg].type ==
-				    FIELD_TYPE_NUMBER) {
-					sqlVdbeAddOp1(v, OP_Realify,
-							  target);
-				}
 				return target;
 			}
 			/*
@@ -4260,14 +4255,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				    (pExpr->iTable ? "new" : "old"),
 				    pExpr->space_def->fields[
 					pExpr->iColumn].name, target));
-
-			/* If the column has type NUMBER, it may currently be stored as an
-			 * integer. Use OP_Realify to make sure it is really real.
-			 */
-			if (pExpr->iColumn >= 0 && def->fields[
-				pExpr->iColumn].type == FIELD_TYPE_NUMBER) {
-				sqlVdbeAddOp1(v, OP_Realify, target);
-			}
 			break;
 		}
 
diff --git a/src/box/sql/vdbe.c b/src/box/sql/vdbe.c
index 9e763ed85..0a3c904b1 100644
--- a/src/box/sql/vdbe.c
+++ b/src/box/sql/vdbe.c
@@ -1445,23 +1445,6 @@ case OP_MustBeInt: {            /* jump, in1 */
 	break;
 }
 
-/* Opcode: Realify P1 * * * *
- *
- * If register P1 holds an integer convert it to a real value.
- *
- * This opcode is used when extracting information from a column that
- * has float type.  Such column values may still be stored as
- * integers, for space efficiency, but after extraction we want them
- * to have only a real value.
- */
-case OP_Realify: {                  /* in1 */
-	pIn1 = &aMem[pOp->p1];
-	if (mem_is_int(pIn1)) {
-		mem_to_double(pIn1);
-	}
-	break;
-}
-
 /* Opcode: Cast P1 P2 * * *
  * Synopsis: type(r[P1])
  *
diff --git a/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
new file mode 100755
index 000000000..d29324a28
--- /dev/null
+++ b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
@@ -0,0 +1,39 @@
+#!/usr/bin/env tarantool
+local test = require("sqltester")
+test:plan(2)
+
+test:execsql([[
+    CREATE TABLE t1 (i NUMBER PRIMARY KEY, n NUMBER);
+    CREATE TABLE t2 (i NUMBER PRIMARY KEY, n NUMBER);
+    CREATE TRIGGER r AFTER INSERT ON t1 FOR EACH ROW BEGIN UPDATE t1 SET n = new.n; END;
+    INSERT INTO t1 VALUES (1, 1);
+    INSERT INTO t2 VALUES (1, 1);
+]])
+
+--
+-- Make sure that there are no unnecesary INTEGER to DOUBLE implicit cast in
+-- field of type NUMBER.
+--
+test:do_execsql_test(
+    "gh-5335-1",
+    [[
+        SELECT i / 2, n / 2 FROM t1;
+    ]], {
+        0, 0
+    })
+
+test:do_execsql_test(
+    "gh-5335-2",
+    [[
+        SELECT i / 2, n / 2 FROM t2 GROUP BY n;
+    ]], {
+        0, 0
+    })
+
+test:execsql([[
+    DROP TRIGGER r;
+    DROP TABLE t1;
+    DROP TABLE t2;
+]])
+
+test:finish_test()
-- 
2.25.1


^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
  2021-07-30  7:14 ` Timur Safin via Tarantool-patches
@ 2021-07-30  7:18   ` Mergen Imeev via Tarantool-patches
  0 siblings, 0 replies; 18+ messages in thread
From: Mergen Imeev via Tarantool-patches @ 2021-07-30  7:18 UTC (permalink / raw)
  To: Timur Safin; +Cc: tarantool-patches

Hi! Thank you for the review!

On Fri, Jul 30, 2021 at 10:14:36AM +0300, Timur Safin wrote:
> Sorry. But this is part of a changes, which we have not agreed upon (reminder, that the 
> last agreement with PMs was to get rid of scalar, but keep number arithmetic), and which 
> [I believe] we would have to revert eventually. Please ask Kirill for ack, if he believes
> that we have to do it for "consistent types" task.
> 
> Let me clarify how I see this - in this particular case forcing real type semantics for 
> NUMBER field was pretty much consistent behavior. And using integer division on some 
> rows, but double on others is actually making things _much less_ consistent. 
> 
> Regards,
> 
Ok, no problem.

> 
> : From: imeevma@tarantool.org <imeevma@tarantool.org>
> : Subject: [PATCH v1 1/1] sql: remove OP_Realify
> : 
> : This opcode was used to convert INTEGER values to REAL. It is not
> : necessary in Tarantool and causes errors.
> : 
> : Due to OP_Realify two type of errors appeared:
> : 1) In some cases in trigger INTEGER may be converted to DOUBLE.
> : For example:
> : box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
> : box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t
> : SET n = new.n; END;")
> : box.execute("INSERT INTO t VALUES (1, 1);")
> : box.execute("SELECT i / 2, n / 2 FROM t;")
> : 
> : Result:
> : tarantool> box.execute("SELECT i / 2, n / 2 FROM t;")
> : ---
> : - metadata:
> :   - name: COLUMN_1
> :     type: number
> :   - name: COLUMN_2
> :     type: number
> :   rows:
> :   - [0, 0.5]
> : ...
> : 
> : 2) If SELECT uses GROUP BY then it may return DOUBLE instead of INTEGER.
> : For example:
> : box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
> : box.execute("INSERT INTO t VALUES (1,1);")
> : box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
> : 
> : Result:
> : tarantool> box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
> : ---
> : - metadata:
> :   - name: COLUMN_1
> :     type: number
> :   - name: COLUMN_2
> :     type: number
> :   rows:
> :   - [0.5, 0.5]
> : ...
> : 
> : This patch removes OP_Realify, after which these errors disappear.
> : 
> : Closes #5335
> : ---
> : https://github.com/tarantool/tarantool/issues/5335
> : https://github.com/tarantool/tarantool/tree/imeevma/gh-5335-remove-op-
> : realify
> : 
> :  ...gh-5335-remove-wrong-double-to-int-cast.md |  4 ++
> :  src/box/sql/expr.c                            | 13 -------
> :  src/box/sql/vdbe.c                            | 17 --------
> :  .../gh-5335-wrong-int-to-double-cast.test.lua | 39 +++++++++++++++++++
> :  4 files changed, 43 insertions(+), 30 deletions(-)
> :  create mode 100644 changelogs/unreleased/gh-5335-remove-wrong-double-to-
> : int-cast.md
> :  create mode 100755 test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
> : 
> : diff --git a/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-
> : cast.md b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
> : new file mode 100644
> : index 000000000..b06805a7f
> : --- /dev/null
> : +++ b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
> : @@ -0,0 +1,4 @@
> : +## bugfix/sql
> : +
> : +* Removed spontaneous conversion from INTEGER to DOUBLE in a field of type
> : +  NUMBER (gh-5335).
> : diff --git a/src/box/sql/expr.c b/src/box/sql/expr.c
> : index 3772596d6..d2624516c 100644
> : --- a/src/box/sql/expr.c
> : +++ b/src/box/sql/expr.c
> : @@ -3700,11 +3700,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int
> : target)
> :  				sqlVdbeAddOp3(v, OP_Column,
> :  						  pAggInfo->sortingIdxPTab,
> :  						  pCol->iSorterColumn, target);
> : -				if (pCol->space_def->fields[pExpr->iAgg].type ==
> : -				    FIELD_TYPE_NUMBER) {
> : -					sqlVdbeAddOp1(v, OP_Realify,
> : -							  target);
> : -				}
> :  				return target;
> :  			}
> :  			/*
> : @@ -4260,14 +4255,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int
> : target)
> :  				    (pExpr->iTable ? "new" : "old"),
> :  				    pExpr->space_def->fields[
> :  					pExpr->iColumn].name, target));
> : -
> : -			/* If the column has type NUMBER, it may currently be
> : stored as an
> : -			 * integer. Use OP_Realify to make sure it is really real.
> : -			 */
> : -			if (pExpr->iColumn >= 0 && def->fields[
> : -				pExpr->iColumn].type == FIELD_TYPE_NUMBER) {
> : -				sqlVdbeAddOp1(v, OP_Realify, target);
> : -			}
> :  			break;
> :  		}
> : 
> : diff --git a/src/box/sql/vdbe.c b/src/box/sql/vdbe.c
> : index 9e763ed85..0a3c904b1 100644
> : --- a/src/box/sql/vdbe.c
> : +++ b/src/box/sql/vdbe.c
> : @@ -1445,23 +1445,6 @@ case OP_MustBeInt: {            /* jump, in1 */
> :  	break;
> :  }
> : 
> : -/* Opcode: Realify P1 * * * *
> : - *
> : - * If register P1 holds an integer convert it to a real value.
> : - *
> : - * This opcode is used when extracting information from a column that
> : - * has float type.  Such column values may still be stored as
> : - * integers, for space efficiency, but after extraction we want them
> : - * to have only a real value.
> : - */
> : -case OP_Realify: {                  /* in1 */
> : -	pIn1 = &aMem[pOp->p1];
> : -	if (mem_is_int(pIn1)) {
> : -		mem_to_double(pIn1);
> : -	}
> : -	break;
> : -}
> : -
> :  /* Opcode: Cast P1 P2 * * *
> :   * Synopsis: type(r[P1])
> :   *
> : diff --git a/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
> : b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
> : new file mode 100755
> : index 000000000..d29324a28
> : --- /dev/null
> : +++ b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
> : @@ -0,0 +1,39 @@
> : +#!/usr/bin/env tarantool
> : +local test = require("sqltester")
> : +test:plan(2)
> : +
> : +test:execsql([[
> : +    CREATE TABLE t1 (i NUMBER PRIMARY KEY, n NUMBER);
> : +    CREATE TABLE t2 (i NUMBER PRIMARY KEY, n NUMBER);
> : +    CREATE TRIGGER r AFTER INSERT ON t1 FOR EACH ROW BEGIN UPDATE t1 SET n
> : = new.n; END;
> : +    INSERT INTO t1 VALUES (1, 1);
> : +    INSERT INTO t2 VALUES (1, 1);
> : +]])
> : +
> : +--
> : +-- Make sure that there are no unnecesary INTEGER to DOUBLE implicit cast
> : in
> : +-- field of type NUMBER.
> : +--
> : +test:do_execsql_test(
> : +    "gh-5335-1",
> : +    [[
> : +        SELECT i / 2, n / 2 FROM t1;
> : +    ]], {
> : +        0, 0
> : +    })
> : +
> : +test:do_execsql_test(
> : +    "gh-5335-2",
> : +    [[
> : +        SELECT i / 2, n / 2 FROM t2 GROUP BY n;
> : +    ]], {
> : +        0, 0
> : +    })
> : +
> : +test:execsql([[
> : +    DROP TRIGGER r;
> : +    DROP TABLE t1;
> : +    DROP TABLE t2;
> : +]])
> : +
> : +test:finish_test()
> : --
> : 2.25.1
> 
> 

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
  2021-07-29  6:48 Mergen Imeev via Tarantool-patches
@ 2021-07-30  7:14 ` Timur Safin via Tarantool-patches
  2021-07-30  7:18   ` Mergen Imeev via Tarantool-patches
  0 siblings, 1 reply; 18+ messages in thread
From: Timur Safin via Tarantool-patches @ 2021-07-30  7:14 UTC (permalink / raw)
  To: imeevma, Kirill Yukhin; +Cc: tarantool-patches

Sorry. But this is part of a changes, which we have not agreed upon (reminder, that the 
last agreement with PMs was to get rid of scalar, but keep number arithmetic), and which 
[I believe] we would have to revert eventually. Please ask Kirill for ack, if he believes
that we have to do it for "consistent types" task.

Let me clarify how I see this - in this particular case forcing real type semantics for 
NUMBER field was pretty much consistent behavior. And using integer division on some 
rows, but double on others is actually making things _much less_ consistent. 

Regards,


: From: imeevma@tarantool.org <imeevma@tarantool.org>
: Subject: [PATCH v1 1/1] sql: remove OP_Realify
: 
: This opcode was used to convert INTEGER values to REAL. It is not
: necessary in Tarantool and causes errors.
: 
: Due to OP_Realify two type of errors appeared:
: 1) In some cases in trigger INTEGER may be converted to DOUBLE.
: For example:
: box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
: box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t
: SET n = new.n; END;")
: box.execute("INSERT INTO t VALUES (1, 1);")
: box.execute("SELECT i / 2, n / 2 FROM t;")
: 
: Result:
: tarantool> box.execute("SELECT i / 2, n / 2 FROM t;")
: ---
: - metadata:
:   - name: COLUMN_1
:     type: number
:   - name: COLUMN_2
:     type: number
:   rows:
:   - [0, 0.5]
: ...
: 
: 2) If SELECT uses GROUP BY then it may return DOUBLE instead of INTEGER.
: For example:
: box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
: box.execute("INSERT INTO t VALUES (1,1);")
: box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
: 
: Result:
: tarantool> box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
: ---
: - metadata:
:   - name: COLUMN_1
:     type: number
:   - name: COLUMN_2
:     type: number
:   rows:
:   - [0.5, 0.5]
: ...
: 
: This patch removes OP_Realify, after which these errors disappear.
: 
: Closes #5335
: ---
: https://github.com/tarantool/tarantool/issues/5335
: https://github.com/tarantool/tarantool/tree/imeevma/gh-5335-remove-op-
: realify
: 
:  ...gh-5335-remove-wrong-double-to-int-cast.md |  4 ++
:  src/box/sql/expr.c                            | 13 -------
:  src/box/sql/vdbe.c                            | 17 --------
:  .../gh-5335-wrong-int-to-double-cast.test.lua | 39 +++++++++++++++++++
:  4 files changed, 43 insertions(+), 30 deletions(-)
:  create mode 100644 changelogs/unreleased/gh-5335-remove-wrong-double-to-
: int-cast.md
:  create mode 100755 test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
: 
: diff --git a/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-
: cast.md b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
: new file mode 100644
: index 000000000..b06805a7f
: --- /dev/null
: +++ b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
: @@ -0,0 +1,4 @@
: +## bugfix/sql
: +
: +* Removed spontaneous conversion from INTEGER to DOUBLE in a field of type
: +  NUMBER (gh-5335).
: diff --git a/src/box/sql/expr.c b/src/box/sql/expr.c
: index 3772596d6..d2624516c 100644
: --- a/src/box/sql/expr.c
: +++ b/src/box/sql/expr.c
: @@ -3700,11 +3700,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int
: target)
:  				sqlVdbeAddOp3(v, OP_Column,
:  						  pAggInfo->sortingIdxPTab,
:  						  pCol->iSorterColumn, target);
: -				if (pCol->space_def->fields[pExpr->iAgg].type ==
: -				    FIELD_TYPE_NUMBER) {
: -					sqlVdbeAddOp1(v, OP_Realify,
: -							  target);
: -				}
:  				return target;
:  			}
:  			/*
: @@ -4260,14 +4255,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int
: target)
:  				    (pExpr->iTable ? "new" : "old"),
:  				    pExpr->space_def->fields[
:  					pExpr->iColumn].name, target));
: -
: -			/* If the column has type NUMBER, it may currently be
: stored as an
: -			 * integer. Use OP_Realify to make sure it is really real.
: -			 */
: -			if (pExpr->iColumn >= 0 && def->fields[
: -				pExpr->iColumn].type == FIELD_TYPE_NUMBER) {
: -				sqlVdbeAddOp1(v, OP_Realify, target);
: -			}
:  			break;
:  		}
: 
: diff --git a/src/box/sql/vdbe.c b/src/box/sql/vdbe.c
: index 9e763ed85..0a3c904b1 100644
: --- a/src/box/sql/vdbe.c
: +++ b/src/box/sql/vdbe.c
: @@ -1445,23 +1445,6 @@ case OP_MustBeInt: {            /* jump, in1 */
:  	break;
:  }
: 
: -/* Opcode: Realify P1 * * * *
: - *
: - * If register P1 holds an integer convert it to a real value.
: - *
: - * This opcode is used when extracting information from a column that
: - * has float type.  Such column values may still be stored as
: - * integers, for space efficiency, but after extraction we want them
: - * to have only a real value.
: - */
: -case OP_Realify: {                  /* in1 */
: -	pIn1 = &aMem[pOp->p1];
: -	if (mem_is_int(pIn1)) {
: -		mem_to_double(pIn1);
: -	}
: -	break;
: -}
: -
:  /* Opcode: Cast P1 P2 * * *
:   * Synopsis: type(r[P1])
:   *
: diff --git a/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
: b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
: new file mode 100755
: index 000000000..d29324a28
: --- /dev/null
: +++ b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
: @@ -0,0 +1,39 @@
: +#!/usr/bin/env tarantool
: +local test = require("sqltester")
: +test:plan(2)
: +
: +test:execsql([[
: +    CREATE TABLE t1 (i NUMBER PRIMARY KEY, n NUMBER);
: +    CREATE TABLE t2 (i NUMBER PRIMARY KEY, n NUMBER);
: +    CREATE TRIGGER r AFTER INSERT ON t1 FOR EACH ROW BEGIN UPDATE t1 SET n
: = new.n; END;
: +    INSERT INTO t1 VALUES (1, 1);
: +    INSERT INTO t2 VALUES (1, 1);
: +]])
: +
: +--
: +-- Make sure that there are no unnecesary INTEGER to DOUBLE implicit cast
: in
: +-- field of type NUMBER.
: +--
: +test:do_execsql_test(
: +    "gh-5335-1",
: +    [[
: +        SELECT i / 2, n / 2 FROM t1;
: +    ]], {
: +        0, 0
: +    })
: +
: +test:do_execsql_test(
: +    "gh-5335-2",
: +    [[
: +        SELECT i / 2, n / 2 FROM t2 GROUP BY n;
: +    ]], {
: +        0, 0
: +    })
: +
: +test:execsql([[
: +    DROP TRIGGER r;
: +    DROP TABLE t1;
: +    DROP TABLE t2;
: +]])
: +
: +test:finish_test()
: --
: 2.25.1



^ permalink raw reply	[flat|nested] 18+ messages in thread

* [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
@ 2021-07-29  6:48 Mergen Imeev via Tarantool-patches
  2021-07-30  7:14 ` Timur Safin via Tarantool-patches
  0 siblings, 1 reply; 18+ messages in thread
From: Mergen Imeev via Tarantool-patches @ 2021-07-29  6:48 UTC (permalink / raw)
  To: tsafin; +Cc: tarantool-patches

This opcode was used to convert INTEGER values to REAL. It is not
necessary in Tarantool and causes errors.

Due to OP_Realify two type of errors appeared:
1) In some cases in trigger INTEGER may be converted to DOUBLE.
For example:
box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t SET n = new.n; END;")
box.execute("INSERT INTO t VALUES (1, 1);")
box.execute("SELECT i / 2, n / 2 FROM t;")

Result:
tarantool> box.execute("SELECT i / 2, n / 2 FROM t;")
---
- metadata:
  - name: COLUMN_1
    type: number
  - name: COLUMN_2
    type: number
  rows:
  - [0, 0.5]
...

2) If SELECT uses GROUP BY then it may return DOUBLE instead of INTEGER.
For example:
box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
box.execute("INSERT INTO t VALUES (1,1);")
box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")

Result:
tarantool> box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
---
- metadata:
  - name: COLUMN_1
    type: number
  - name: COLUMN_2
    type: number
  rows:
  - [0.5, 0.5]
...

This patch removes OP_Realify, after which these errors disappear.

Closes #5335
---
https://github.com/tarantool/tarantool/issues/5335
https://github.com/tarantool/tarantool/tree/imeevma/gh-5335-remove-op-realify

 ...gh-5335-remove-wrong-double-to-int-cast.md |  4 ++
 src/box/sql/expr.c                            | 13 -------
 src/box/sql/vdbe.c                            | 17 --------
 .../gh-5335-wrong-int-to-double-cast.test.lua | 39 +++++++++++++++++++
 4 files changed, 43 insertions(+), 30 deletions(-)
 create mode 100644 changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
 create mode 100755 test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua

diff --git a/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
new file mode 100644
index 000000000..b06805a7f
--- /dev/null
+++ b/changelogs/unreleased/gh-5335-remove-wrong-double-to-int-cast.md
@@ -0,0 +1,4 @@
+## bugfix/sql
+
+* Removed spontaneous conversion from INTEGER to DOUBLE in a field of type
+  NUMBER (gh-5335).
diff --git a/src/box/sql/expr.c b/src/box/sql/expr.c
index 3772596d6..d2624516c 100644
--- a/src/box/sql/expr.c
+++ b/src/box/sql/expr.c
@@ -3700,11 +3700,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				sqlVdbeAddOp3(v, OP_Column,
 						  pAggInfo->sortingIdxPTab,
 						  pCol->iSorterColumn, target);
-				if (pCol->space_def->fields[pExpr->iAgg].type ==
-				    FIELD_TYPE_NUMBER) {
-					sqlVdbeAddOp1(v, OP_Realify,
-							  target);
-				}
 				return target;
 			}
 			/*
@@ -4260,14 +4255,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				    (pExpr->iTable ? "new" : "old"),
 				    pExpr->space_def->fields[
 					pExpr->iColumn].name, target));
-
-			/* If the column has type NUMBER, it may currently be stored as an
-			 * integer. Use OP_Realify to make sure it is really real.
-			 */
-			if (pExpr->iColumn >= 0 && def->fields[
-				pExpr->iColumn].type == FIELD_TYPE_NUMBER) {
-				sqlVdbeAddOp1(v, OP_Realify, target);
-			}
 			break;
 		}
 
diff --git a/src/box/sql/vdbe.c b/src/box/sql/vdbe.c
index 9e763ed85..0a3c904b1 100644
--- a/src/box/sql/vdbe.c
+++ b/src/box/sql/vdbe.c
@@ -1445,23 +1445,6 @@ case OP_MustBeInt: {            /* jump, in1 */
 	break;
 }
 
-/* Opcode: Realify P1 * * * *
- *
- * If register P1 holds an integer convert it to a real value.
- *
- * This opcode is used when extracting information from a column that
- * has float type.  Such column values may still be stored as
- * integers, for space efficiency, but after extraction we want them
- * to have only a real value.
- */
-case OP_Realify: {                  /* in1 */
-	pIn1 = &aMem[pOp->p1];
-	if (mem_is_int(pIn1)) {
-		mem_to_double(pIn1);
-	}
-	break;
-}
-
 /* Opcode: Cast P1 P2 * * *
  * Synopsis: type(r[P1])
  *
diff --git a/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
new file mode 100755
index 000000000..d29324a28
--- /dev/null
+++ b/test/sql-tap/gh-5335-wrong-int-to-double-cast.test.lua
@@ -0,0 +1,39 @@
+#!/usr/bin/env tarantool
+local test = require("sqltester")
+test:plan(2)
+
+test:execsql([[
+    CREATE TABLE t1 (i NUMBER PRIMARY KEY, n NUMBER);
+    CREATE TABLE t2 (i NUMBER PRIMARY KEY, n NUMBER);
+    CREATE TRIGGER r AFTER INSERT ON t1 FOR EACH ROW BEGIN UPDATE t1 SET n = new.n; END;
+    INSERT INTO t1 VALUES (1, 1);
+    INSERT INTO t2 VALUES (1, 1);
+]])
+
+--
+-- Make sure that there are no unnecesary INTEGER to DOUBLE implicit cast in
+-- field of type NUMBER.
+--
+test:do_execsql_test(
+    "gh-5335-1",
+    [[
+        SELECT i / 2, n / 2 FROM t1;
+    ]], {
+        0, 0
+    })
+
+test:do_execsql_test(
+    "gh-5335-2",
+    [[
+        SELECT i / 2, n / 2 FROM t2 GROUP BY n;
+    ]], {
+        0, 0
+    })
+
+test:execsql([[
+    DROP TRIGGER r;
+    DROP TABLE t1;
+    DROP TABLE t2;
+]])
+
+test:finish_test()
-- 
2.25.1


^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
  2020-09-28 15:55 ` Nikita Pettik
@ 2020-09-28 16:41   ` Mergen Imeev
  0 siblings, 0 replies; 18+ messages in thread
From: Mergen Imeev @ 2020-09-28 16:41 UTC (permalink / raw)
  To: Nikita Pettik; +Cc: tarantool-patches

Hi! Thank you for review! My answer below.

On Mon, Sep 28, 2020 at 03:55:59PM +0000, Nikita Pettik wrote:
> On 26 Sep 17:15, imeevma@tarantool.org wrote:
> > This opcode was used to convert INTEGER values to REAL. It is not
> > necessary in Tarantool and may cause errors.
> 
> Add justification: what this change fixes, in which way etc.
>  
Fixed:

commit 379694944e39a3b0c33135a724f2ee246c619110
Author: Mergen Imeev <imeevma@gmail.com>
Date:   Sat Sep 26 12:43:18 2020 +0300

    sql: remove OP_Realify
    
    This opcode was used to convert INTEGER values to REAL. It is not
    necessary in Tarantool and causes errors.
    
    Due to OP_Realify two type of errors appeared:
    1) In some cases in trigger INTEGER may be converted to DOUBLE.
    For example:
    box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
    box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t SET n = new.n; END;")
    box.execute("INSERT INTO t VALUES (1, 1);")
    box.execute("SELECT i / 2, n / 2 FROM t;")
    
    Result:
    tarantool> box.execute("SELECT i / 2, n / 2 FROM t;")
    ---
    - metadata:
      - name: COLUMN_1
        type: number
      - name: COLUMN_2
        type: number
      rows:
      - [0, 0.5]
    ...
    
    2) If SELECT uses GROUP BY then it may return DOUBLE instead of INTEGER.
    For example:
    box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
    box.execute("INSERT INTO t VALUES (1,1);")
    box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
    
    Result:
    tarantool> box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
    ---
    - metadata:
      - name: COLUMN_1
        type: number
      - name: COLUMN_2
        type: number
      rows:
      - [0.5, 0.5]
    ...
    
    This patch removes OP_Realify, after which these errors disappear.
    
    Closes #5335


> > Closes #5335
> > ---
> > https://github.com/tarantool/tarantool/issues/5335
> > https://github.com/tarantool/tarantool/tree/imeevma/gh-5335-remove-op-realify
> > 
> > @ChangeLog
> >  - Fixed a bug with unnecessary convertion from INTEGER to DOUBLE (gh-5335).
> > 
> >  src/box/sql/delete.c                          | 12 -----
> >  src/box/sql/expr.c                            | 13 -----
> >  src/box/sql/vdbe.c                            | 17 -------
> >  ...-unnecessary-conversation-to-double.result | 51 +++++++++++++++++++
> >  ...nnecessary-conversation-to-double.test.lua | 11 ++++
> >  5 files changed, 62 insertions(+), 42 deletions(-)
> >  create mode 100644 test/sql/gh-5335-unnecessary-conversation-to-double.result
> >  create mode 100644 test/sql/gh-5335-unnecessary-conversation-to-double.test.lua
> > 
> > diff --git a/src/box/sql/delete.c b/src/box/sql/delete.c
> > index 68abd1f58..a78c68df6 100644
> > --- a/src/box/sql/delete.c
> > +++ b/src/box/sql/delete.c
> > @@ -565,18 +565,6 @@ sql_generate_index_key(struct Parse *parse, struct index *index, int cursor,
> >  		}
> >  		uint32_t tabl_col = index->def->key_def->parts[j].fieldno;
> >  		sqlVdbeAddOp3(v, OP_Column, cursor, tabl_col, reg_base + j);
> > -		/*
> > -		 * If the column type is NUMBER but the number
> > -		 * is an integer, then it might be stored in the
> > -		 * table as an integer (using a compact
> > -		 * representation) then converted to REAL by an
> > -		 * OP_Realify opcode. But we are getting
> > -		 * ready to store this value back into an index,
> > -		 * where it should be converted by to INTEGER
> > -		 * again.  So omit the OP_Realify opcode if
> > -		 * it is present
> > -		 */
> > -		sqlVdbeDeletePriorOpcode(v, OP_Realify);
> >  	}
> >  	if (reg_out != 0)
> >  		sqlVdbeAddOp3(v, OP_MakeRecord, reg_base, col_cnt, reg_out);

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
  2020-09-26 14:15 imeevma
@ 2020-09-28 15:55 ` Nikita Pettik
  2020-09-28 16:41   ` Mergen Imeev
  0 siblings, 1 reply; 18+ messages in thread
From: Nikita Pettik @ 2020-09-28 15:55 UTC (permalink / raw)
  To: imeevma; +Cc: tarantool-patches

On 26 Sep 17:15, imeevma@tarantool.org wrote:
> This opcode was used to convert INTEGER values to REAL. It is not
> necessary in Tarantool and may cause errors.

Add justification: what this change fixes, in which way etc.
 
> Closes #5335
> ---
> https://github.com/tarantool/tarantool/issues/5335
> https://github.com/tarantool/tarantool/tree/imeevma/gh-5335-remove-op-realify
> 
> @ChangeLog
>  - Fixed a bug with unnecessary convertion from INTEGER to DOUBLE (gh-5335).
> 
>  src/box/sql/delete.c                          | 12 -----
>  src/box/sql/expr.c                            | 13 -----
>  src/box/sql/vdbe.c                            | 17 -------
>  ...-unnecessary-conversation-to-double.result | 51 +++++++++++++++++++
>  ...nnecessary-conversation-to-double.test.lua | 11 ++++
>  5 files changed, 62 insertions(+), 42 deletions(-)
>  create mode 100644 test/sql/gh-5335-unnecessary-conversation-to-double.result
>  create mode 100644 test/sql/gh-5335-unnecessary-conversation-to-double.test.lua
> 
> diff --git a/src/box/sql/delete.c b/src/box/sql/delete.c
> index 68abd1f58..a78c68df6 100644
> --- a/src/box/sql/delete.c
> +++ b/src/box/sql/delete.c
> @@ -565,18 +565,6 @@ sql_generate_index_key(struct Parse *parse, struct index *index, int cursor,
>  		}
>  		uint32_t tabl_col = index->def->key_def->parts[j].fieldno;
>  		sqlVdbeAddOp3(v, OP_Column, cursor, tabl_col, reg_base + j);
> -		/*
> -		 * If the column type is NUMBER but the number
> -		 * is an integer, then it might be stored in the
> -		 * table as an integer (using a compact
> -		 * representation) then converted to REAL by an
> -		 * OP_Realify opcode. But we are getting
> -		 * ready to store this value back into an index,
> -		 * where it should be converted by to INTEGER
> -		 * again.  So omit the OP_Realify opcode if
> -		 * it is present
> -		 */
> -		sqlVdbeDeletePriorOpcode(v, OP_Realify);
>  	}
>  	if (reg_out != 0)
>  		sqlVdbeAddOp3(v, OP_MakeRecord, reg_base, col_cnt, reg_out);

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
@ 2020-09-26 14:15 imeevma
  2020-09-28 15:55 ` Nikita Pettik
  0 siblings, 1 reply; 18+ messages in thread
From: imeevma @ 2020-09-26 14:15 UTC (permalink / raw)
  To: korablev, tsafin; +Cc: tarantool-patches

This opcode was used to convert INTEGER values to REAL. It is not
necessary in Tarantool and may cause errors.

Closes #5335
---
https://github.com/tarantool/tarantool/issues/5335
https://github.com/tarantool/tarantool/tree/imeevma/gh-5335-remove-op-realify

@ChangeLog
 - Fixed a bug with unnecessary convertion from INTEGER to DOUBLE (gh-5335).

 src/box/sql/delete.c                          | 12 -----
 src/box/sql/expr.c                            | 13 -----
 src/box/sql/vdbe.c                            | 17 -------
 ...-unnecessary-conversation-to-double.result | 51 +++++++++++++++++++
 ...nnecessary-conversation-to-double.test.lua | 11 ++++
 5 files changed, 62 insertions(+), 42 deletions(-)
 create mode 100644 test/sql/gh-5335-unnecessary-conversation-to-double.result
 create mode 100644 test/sql/gh-5335-unnecessary-conversation-to-double.test.lua

diff --git a/src/box/sql/delete.c b/src/box/sql/delete.c
index 68abd1f58..a78c68df6 100644
--- a/src/box/sql/delete.c
+++ b/src/box/sql/delete.c
@@ -565,18 +565,6 @@ sql_generate_index_key(struct Parse *parse, struct index *index, int cursor,
 		}
 		uint32_t tabl_col = index->def->key_def->parts[j].fieldno;
 		sqlVdbeAddOp3(v, OP_Column, cursor, tabl_col, reg_base + j);
-		/*
-		 * If the column type is NUMBER but the number
-		 * is an integer, then it might be stored in the
-		 * table as an integer (using a compact
-		 * representation) then converted to REAL by an
-		 * OP_Realify opcode. But we are getting
-		 * ready to store this value back into an index,
-		 * where it should be converted by to INTEGER
-		 * again.  So omit the OP_Realify opcode if
-		 * it is present
-		 */
-		sqlVdbeDeletePriorOpcode(v, OP_Realify);
 	}
 	if (reg_out != 0)
 		sqlVdbeAddOp3(v, OP_MakeRecord, reg_base, col_cnt, reg_out);
diff --git a/src/box/sql/expr.c b/src/box/sql/expr.c
index bc2182446..09a2d3ef9 100644
--- a/src/box/sql/expr.c
+++ b/src/box/sql/expr.c
@@ -3700,11 +3700,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				sqlVdbeAddOp3(v, OP_Column,
 						  pAggInfo->sortingIdxPTab,
 						  pCol->iSorterColumn, target);
-				if (pCol->space_def->fields[pExpr->iAgg].type ==
-				    FIELD_TYPE_NUMBER) {
-					sqlVdbeAddOp1(v, OP_Realify,
-							  target);
-				}
 				return target;
 			}
 			/* Otherwise, fall thru into the TK_COLUMN case */
@@ -4257,14 +4252,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				    (pExpr->iTable ? "new" : "old"),
 				    pExpr->space_def->fields[
 					pExpr->iColumn].name, target));
-
-			/* If the column has type NUMBER, it may currently be stored as an
-			 * integer. Use OP_Realify to make sure it is really real.
-			 */
-			if (pExpr->iColumn >= 0 && def->fields[
-				pExpr->iColumn].type == FIELD_TYPE_NUMBER) {
-				sqlVdbeAddOp1(v, OP_Realify, target);
-			}
 			break;
 		}
 
diff --git a/src/box/sql/vdbe.c b/src/box/sql/vdbe.c
index 14ddb5160..a86461c4c 100644
--- a/src/box/sql/vdbe.c
+++ b/src/box/sql/vdbe.c
@@ -2105,23 +2105,6 @@ case OP_MustBeInt: {            /* jump, in1 */
 	break;
 }
 
-/* Opcode: Realify P1 * * * *
- *
- * If register P1 holds an integer convert it to a real value.
- *
- * This opcode is used when extracting information from a column that
- * has float type.  Such column values may still be stored as
- * integers, for space efficiency, but after extraction we want them
- * to have only a real value.
- */
-case OP_Realify: {                  /* in1 */
-	pIn1 = &aMem[pOp->p1];
-	if ((pIn1->flags & (MEM_Int | MEM_UInt)) != 0) {
-		sqlVdbeMemRealify(pIn1);
-	}
-	break;
-}
-
 /* Opcode: Cast P1 P2 * * *
  * Synopsis: type(r[P1])
  *
diff --git a/test/sql/gh-5335-unnecessary-conversation-to-double.result b/test/sql/gh-5335-unnecessary-conversation-to-double.result
new file mode 100644
index 000000000..e3f0f0b0b
--- /dev/null
+++ b/test/sql/gh-5335-unnecessary-conversation-to-double.result
@@ -0,0 +1,51 @@
+-- test-run result file version 2
+-- Make sure that INTEGER is not converted to DOUBLE in cases below.
+box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
+ | ---
+ | - row_count: 1
+ | ...
+box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t SET n = new.n; END;")
+ | ---
+ | - row_count: 1
+ | ...
+box.execute("INSERT INTO t VALUES (1, 1);")
+ | ---
+ | - row_count: 1
+ | ...
+box.execute("SELECT i / 2, n / 2 FROM t;")
+ | ---
+ | - metadata:
+ |   - name: COLUMN_1
+ |     type: number
+ |   - name: COLUMN_2
+ |     type: number
+ |   rows:
+ |   - [0, 0]
+ | ...
+box.execute("DROP TABLE t;")
+ | ---
+ | - row_count: 1
+ | ...
+
+box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
+ | ---
+ | - row_count: 1
+ | ...
+box.execute("INSERT INTO t VALUES (1,1);")
+ | ---
+ | - row_count: 1
+ | ...
+box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
+ | ---
+ | - metadata:
+ |   - name: COLUMN_1
+ |     type: number
+ |   - name: COLUMN_2
+ |     type: number
+ |   rows:
+ |   - [0, 0]
+ | ...
+box.execute("DROP TABLE t;")
+ | ---
+ | - row_count: 1
+ | ...
diff --git a/test/sql/gh-5335-unnecessary-conversation-to-double.test.lua b/test/sql/gh-5335-unnecessary-conversation-to-double.test.lua
new file mode 100644
index 000000000..1663d054a
--- /dev/null
+++ b/test/sql/gh-5335-unnecessary-conversation-to-double.test.lua
@@ -0,0 +1,11 @@
+-- Make sure that INTEGER is not converted to DOUBLE in cases below.
+box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
+box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t SET n = new.n; END;")
+box.execute("INSERT INTO t VALUES (1, 1);")
+box.execute("SELECT i / 2, n / 2 FROM t;")
+box.execute("DROP TABLE t;")
+
+box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
+box.execute("INSERT INTO t VALUES (1,1);")
+box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
+box.execute("DROP TABLE t;")
-- 
2.25.1

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
  2020-09-26 10:46 imeevma
@ 2020-09-26 13:05 ` Vladislav Shpilevoy
  0 siblings, 0 replies; 18+ messages in thread
From: Vladislav Shpilevoy @ 2020-09-26 13:05 UTC (permalink / raw)
  To: imeevma, tsafin; +Cc: tarantool-patches

Hi! Thanks for the patch!

LGTM.

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify
@ 2020-09-26 10:46 imeevma
  2020-09-26 13:05 ` Vladislav Shpilevoy
  0 siblings, 1 reply; 18+ messages in thread
From: imeevma @ 2020-09-26 10:46 UTC (permalink / raw)
  To: v.shpilevoy, tsafin; +Cc: tarantool-patches

This opcode was used to convert INTEGER values to REAL. It is not
necessary in Tarantool and may cause errors.

Closes #5335
---
https://github.com/tarantool/tarantool/issues/5335
https://github.com/tarantool/tarantool/tree/imeevma/gh-5335-remove-op-realify

@ChangeLog
 - Fixed a bug with unnecessary conversation from INTEGER to DOUBLE (gh-5335).

 src/box/sql/delete.c                          | 12 -----
 src/box/sql/expr.c                            | 13 -----
 src/box/sql/vdbe.c                            | 17 -------
 ...-unnecessary-conversation-to-double.result | 51 +++++++++++++++++++
 ...nnecessary-conversation-to-double.test.lua | 11 ++++
 5 files changed, 62 insertions(+), 42 deletions(-)
 create mode 100644 test/sql/gh-5335-unnecessary-conversation-to-double.result
 create mode 100644 test/sql/gh-5335-unnecessary-conversation-to-double.test.lua

diff --git a/src/box/sql/delete.c b/src/box/sql/delete.c
index 68abd1f58..a78c68df6 100644
--- a/src/box/sql/delete.c
+++ b/src/box/sql/delete.c
@@ -565,18 +565,6 @@ sql_generate_index_key(struct Parse *parse, struct index *index, int cursor,
 		}
 		uint32_t tabl_col = index->def->key_def->parts[j].fieldno;
 		sqlVdbeAddOp3(v, OP_Column, cursor, tabl_col, reg_base + j);
-		/*
-		 * If the column type is NUMBER but the number
-		 * is an integer, then it might be stored in the
-		 * table as an integer (using a compact
-		 * representation) then converted to REAL by an
-		 * OP_Realify opcode. But we are getting
-		 * ready to store this value back into an index,
-		 * where it should be converted by to INTEGER
-		 * again.  So omit the OP_Realify opcode if
-		 * it is present
-		 */
-		sqlVdbeDeletePriorOpcode(v, OP_Realify);
 	}
 	if (reg_out != 0)
 		sqlVdbeAddOp3(v, OP_MakeRecord, reg_base, col_cnt, reg_out);
diff --git a/src/box/sql/expr.c b/src/box/sql/expr.c
index bc2182446..09a2d3ef9 100644
--- a/src/box/sql/expr.c
+++ b/src/box/sql/expr.c
@@ -3700,11 +3700,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				sqlVdbeAddOp3(v, OP_Column,
 						  pAggInfo->sortingIdxPTab,
 						  pCol->iSorterColumn, target);
-				if (pCol->space_def->fields[pExpr->iAgg].type ==
-				    FIELD_TYPE_NUMBER) {
-					sqlVdbeAddOp1(v, OP_Realify,
-							  target);
-				}
 				return target;
 			}
 			/* Otherwise, fall thru into the TK_COLUMN case */
@@ -4257,14 +4252,6 @@ sqlExprCodeTarget(Parse * pParse, Expr * pExpr, int target)
 				    (pExpr->iTable ? "new" : "old"),
 				    pExpr->space_def->fields[
 					pExpr->iColumn].name, target));
-
-			/* If the column has type NUMBER, it may currently be stored as an
-			 * integer. Use OP_Realify to make sure it is really real.
-			 */
-			if (pExpr->iColumn >= 0 && def->fields[
-				pExpr->iColumn].type == FIELD_TYPE_NUMBER) {
-				sqlVdbeAddOp1(v, OP_Realify, target);
-			}
 			break;
 		}
 
diff --git a/src/box/sql/vdbe.c b/src/box/sql/vdbe.c
index 14ddb5160..a86461c4c 100644
--- a/src/box/sql/vdbe.c
+++ b/src/box/sql/vdbe.c
@@ -2105,23 +2105,6 @@ case OP_MustBeInt: {            /* jump, in1 */
 	break;
 }
 
-/* Opcode: Realify P1 * * * *
- *
- * If register P1 holds an integer convert it to a real value.
- *
- * This opcode is used when extracting information from a column that
- * has float type.  Such column values may still be stored as
- * integers, for space efficiency, but after extraction we want them
- * to have only a real value.
- */
-case OP_Realify: {                  /* in1 */
-	pIn1 = &aMem[pOp->p1];
-	if ((pIn1->flags & (MEM_Int | MEM_UInt)) != 0) {
-		sqlVdbeMemRealify(pIn1);
-	}
-	break;
-}
-
 /* Opcode: Cast P1 P2 * * *
  * Synopsis: type(r[P1])
  *
diff --git a/test/sql/gh-5335-unnecessary-conversation-to-double.result b/test/sql/gh-5335-unnecessary-conversation-to-double.result
new file mode 100644
index 000000000..e3f0f0b0b
--- /dev/null
+++ b/test/sql/gh-5335-unnecessary-conversation-to-double.result
@@ -0,0 +1,51 @@
+-- test-run result file version 2
+-- Make sure that INTEGER is not converted to DOUBLE in cases below.
+box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
+ | ---
+ | - row_count: 1
+ | ...
+box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t SET n = new.n; END;")
+ | ---
+ | - row_count: 1
+ | ...
+box.execute("INSERT INTO t VALUES (1, 1);")
+ | ---
+ | - row_count: 1
+ | ...
+box.execute("SELECT i / 2, n / 2 FROM t;")
+ | ---
+ | - metadata:
+ |   - name: COLUMN_1
+ |     type: number
+ |   - name: COLUMN_2
+ |     type: number
+ |   rows:
+ |   - [0, 0]
+ | ...
+box.execute("DROP TABLE t;")
+ | ---
+ | - row_count: 1
+ | ...
+
+box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
+ | ---
+ | - row_count: 1
+ | ...
+box.execute("INSERT INTO t VALUES (1,1);")
+ | ---
+ | - row_count: 1
+ | ...
+box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
+ | ---
+ | - metadata:
+ |   - name: COLUMN_1
+ |     type: number
+ |   - name: COLUMN_2
+ |     type: number
+ |   rows:
+ |   - [0, 0]
+ | ...
+box.execute("DROP TABLE t;")
+ | ---
+ | - row_count: 1
+ | ...
diff --git a/test/sql/gh-5335-unnecessary-conversation-to-double.test.lua b/test/sql/gh-5335-unnecessary-conversation-to-double.test.lua
new file mode 100644
index 000000000..1663d054a
--- /dev/null
+++ b/test/sql/gh-5335-unnecessary-conversation-to-double.test.lua
@@ -0,0 +1,11 @@
+-- Make sure that INTEGER is not converted to DOUBLE in cases below.
+box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
+box.execute("CREATE TRIGGER t AFTER INSERT ON t FOR EACH ROW BEGIN UPDATE t SET n = new.n; END;")
+box.execute("INSERT INTO t VALUES (1, 1);")
+box.execute("SELECT i / 2, n / 2 FROM t;")
+box.execute("DROP TABLE t;")
+
+box.execute("CREATE TABLE t (i NUMBER PRIMARY KEY, n NUMBER);")
+box.execute("INSERT INTO t VALUES (1,1);")
+box.execute("SELECT i / 2, n / 2 FROM t GROUP BY n;")
+box.execute("DROP TABLE t;")
-- 
2.25.1

^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, other threads:[~2021-08-05  9:38 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-23  7:54 [Tarantool-patches] [PATCH v1 1/1] sql: remove OP_Realify Mergen Imeev via Tarantool-patches
2021-07-26 20:58 ` Vladislav Shpilevoy via Tarantool-patches
2021-07-27  8:53   ` Mergen Imeev via Tarantool-patches
2021-07-28 21:59     ` Vladislav Shpilevoy via Tarantool-patches
  -- strict thread matches above, loose matches on Subject: below --
2021-08-04  8:30 Mergen Imeev via Tarantool-patches
2021-08-04 14:08 ` Kirill Yukhin via Tarantool-patches
2021-08-04 16:11   ` Vitaliia Ioffe via Tarantool-patches
2021-08-05  9:38 ` Kirill Yukhin via Tarantool-patches
2021-08-02 18:09 Mergen Imeev via Tarantool-patches
2021-07-30  7:25 Mergen Imeev via Tarantool-patches
2021-07-29  6:48 Mergen Imeev via Tarantool-patches
2021-07-30  7:14 ` Timur Safin via Tarantool-patches
2021-07-30  7:18   ` Mergen Imeev via Tarantool-patches
2020-09-26 14:15 imeevma
2020-09-28 15:55 ` Nikita Pettik
2020-09-28 16:41   ` Mergen Imeev
2020-09-26 10:46 imeevma
2020-09-26 13:05 ` Vladislav Shpilevoy

Tarantool development patches archive

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://lists.tarantool.org/tarantool-patches/0 tarantool-patches/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 tarantool-patches tarantool-patches/ https://lists.tarantool.org/tarantool-patches \
		tarantool-patches@dev.tarantool.org.
	public-inbox-index tarantool-patches

Example config snippet for mirrors.


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git