* [tarantool-patches] [PATCH V3] Prohibit router/storage configuration from different fibers
@ 2018-09-11 10:38 Evgeniy Zaikin
0 siblings, 0 replies; 5+ messages in thread
From: Evgeniy Zaikin @ 2018-09-11 10:38 UTC (permalink / raw)
To: tarantool-patches
Subject: [PATCH V3] Prohibit router/storage configuration from different fibers
Fixes: #140
---
Ticket:https://github.com/tarantool/vshard/issues/140
Branch:https://github.com/tarantool/vshard/tree/rave4life/gh-140-prohibit-multiple-cfg
On Thu, 30 Aug 2018 at 03:56, Vladislav Shpilevoy
<v.shpilevoy@tarantool.org> wrote:
>
> Hi! Thanks for the fixes. See 9 comments below.
>
> 1. Please, put your fixes inlined right after my
> remarks in a response email. It is hard sometimes
> so track which of my remarks are not fixed without
> this.
>
OK, see my patch below in this email.
> 2. Write all your questions about a patch into
> tarantool-patches. I paste here your question
> from a private email:
>
> > Hi! I have a question about writing test module. The test should fail
> > if patch (or any part of this patch) is absent. But it is difficult to
> > make it possible without any architectural distortion (e.g. without
> > making nested function calls, without redundant constructions and code
> > injection, without any overkills in working code). There are no
> > questions If no test needed, but...
> > So which way is correct:
> > 1. to make one more nested (redundant) call in router/storage code;
> > 2. to inject additional counters in 'vshard.util' module, witch
> > contains implementation of my path ?
> > Current PATCH v2, witch was already sent, implements 2nd way (test
> > fails if M.lock:put(true) / M.lock:get() is absent or disabled).
> > https://www.freelists.org/post/tarantool-patches/PATCH-v2-Prohibit-routerstorage-configuration-from-different-fibers
> >
> > Thank you for reviewing my patch.
>
> Answer is the following: neither of those things. Use M.errinj
> table for such error injections, as I said in the previous review.
> Look at its current content and how is it used to make the similar
> test for concurrent cfgs. Or dig into errinj.h in Tarantool to
> find which of existing ones can be used.
>
Fixed. M.errinj.ERRINJ_MULTIPLE_CFG was introduced.
> On 21/08/2018 06:27, Евгений Заикин wrote:
> > Adds prohibition of simultaneous router/storage configuration from
> > multiple fibers.
> > Fixes: #140
> >
> > ---
> > Ticket:https://github.com/tarantool/vshard/issues/140
> > Branch:https://github.com/tarantool/vshard/tree/rave4life/gh-140-prohibit-multiple-cfg
> >
> > Changes in v2:
> > - separated test for router and storage
> > - locker wrapper function moved to vshard.utils
> > test/router/multi_fiber_cfg.result | 38 +++++++++++++++++++++++++
> > test/router/multi_fiber_cfg.test.lua | 12 ++++++++
> > test/storage/multi_fiber_cfg.result | 41 +++++++++++++++++++++++++++
> > test/storage/multi_fiber_cfg.test.lua | 13 +++++++++
> > vshard/router/init.lua | 6 ++--
> > vshard/storage/init.lua | 4 +--
> > vshard/util.lua | 17 +++++++++++
> > 7 files changed, 126 insertions(+), 5 deletions(-)
> > create mode 100644 test/router/multi_fiber_cfg.result
> > create mode 100644 test/router/multi_fiber_cfg.test.lua
> > create mode 100644 test/storage/multi_fiber_cfg.result
> > create mode 100644 test/storage/multi_fiber_cfg.test.lua
> >
> > diff --git a/test/router/multi_fiber_cfg.result
> > b/test/router/multi_fiber_cfg.result
> > new file mode 100644
> > index 0000000..42a4055
> > --- /dev/null
> > +++ b/test/router/multi_fiber_cfg.result
> > @@ -0,0 +1,38 @@
> > +test_run = require('test_run').new()
> > +---
> > +...
> > +cfg = require('localcfg')
> > +---
> > +...
> > +cfg.memtx_memory = nil
>
> 3. Why do you modify cfg?
> The same question for storage test.
>
See 'localcfg.lua': memtx_memory = 100 * 1024 * 1024.
Cause memtx_memory always set to larger size in previous tests, an error occured
while vshard.router/vshard.storage applies this config:
cannot decrease memory size at runtime.
Removed obvious nullifying by reinitialization 'cfg' entries on-a-fly.
Should I kill all instances (or full cluster clleanup) before this test?
Prefered not to do it making tests run as fast as possible.
> > +---
> > +...
> > +vshard = require('vshard')
>
> 4. As I said in the previous review, please,
> put this test into router/router.test.lua. It
> is not worth a separate file.
OK, fixed.
>
> The same remark for storage test.
>
> > +---
> > +...
> > +fiber = require('fiber')
> > +---
> > +...
> > +vshard.router.cfg(cfg)
> > +---
> > +...
> > +c = fiber.channel(2)
> > +---
> > +...
> > +f = function() fiber.create(function() local status, err =
> > pcall(vshard.router.cfg, cfg) c:put(status and true or false) end) end
> > +---
> > +...
> > +f()
> > +---
> > +...
> > +f()
> > +---
> > +...
> > +c:get()
> > +---
> > +- true
> > +...
> > +c:get()
> > +---
> > +- true
> > +...
> > diff --git a/vshard/router/init.lua b/vshard/router/init.lua
> > index 60ceafa..6b7a2c5 100644
> > --- a/vshard/router/init.lua
> > +++ b/vshard/router/init.lua
> > @@ -860,7 +860,7 @@ end
> >
> > local router_mt = {
> > __index = {
> > - cfg = function(router, cfg) return router_cfg(router, cfg, false) end,
> > + cfg = function(router, cfg) return
> > util.locker_func(router_cfg, router, cfg, false) end,
>
> 5. Out of 80 symbols per line.
Fixed.
>
> > info = router_info;
> > buckets_info = router_buckets_info;
> > call = router_call;
> > diff --git a/vshard/storage/init.lua b/vshard/storage/init.lua
> > index f9b8000..83f7343 100644
> > --- a/vshard/storage/init.lua
> > +++ b/vshard/storage/init.lua
> > @@ -1871,7 +1871,7 @@ if not rawget(_G, MODULE_INTERNALS) then
> > rawset(_G, MODULE_INTERNALS, M)
> > else
> > reload_evolution.upgrade(M)
> > - storage_cfg(M.current_cfg, M.this_replica.uuid, true)
> > + util.locker_func(storage_cfg, M.current_cfg, M.this_replica.uuid, true)
>
> 6. Do not use tabs in Lua files for indentation.
>
OK, tabs are replaced by spaces.
> > M.module_version = M.module_version + 1
> > end
> >
> > @@ -1908,7 +1908,7 @@ return {
> > rebalancing_is_in_progress = rebalancing_is_in_progress,
> > recovery_wakeup = recovery_wakeup,
> > call = storage_call,
> > - cfg = function(cfg, uuid) return storage_cfg(cfg, uuid, false) end,
> > + cfg = function(cfg, uuid) return util.locker_func(storage_cfg,
> > cfg, uuid, false) end,
>
> 7. Out of 80.
>
Fixed.
> > info = storage_info,
> > buckets_info = storage_buckets_info,
> > buckets_count = storage_buckets_count,
> > diff --git a/vshard/util.lua b/vshard/util.lua
> > index 3afaa61..d52598b 100644
> > --- a/vshard/util.lua
> > +++ b/vshard/util.lua
> > @@ -134,10 +136,25 @@ local function async_task(delay, task, ...)
> > fiber.create(sync_task, delay, task, ...)
> > end
> >
> > +local function locker_func(f, ...)
> > + M.lock:put(true)
> > + if M.cfg_counter > 0 then
> > + error('Error: cfg_counter > 0')
> > + end
> > + M.cfg_counter = M.cfg_counter + 1
> > + local status, err = pcall(f, ...)
> > + M.cfg_counter = M.cfg_counter - 1
> > + M.lock:get()
> > + if not status then
> > + error(err)
> > + end
> > +end
>
> 8. Since you started working on this patch, multiple
> routers per process feature was pushed, so M now can
> not be used in router for the counter and the lock.
> Please, rebase. Now each router should have its own
> non-global lock.
>
Rebased, moved again to router and storage. Latch implementation
now is different for router and storage, because multiple routers
was pushed.
> 9. Please, write a comment to this function like it
> is done for other ones.
>
OK, short comment is written. But since latch wrapper function is
local per lua file, there is no need to write full description.
> > +
> > return {
> > tuple_extract_key = tuple_extract_key,
> > reloadable_fiber_create = reloadable_fiber_create,
> > generate_self_checker = generate_self_checker,
> > async_task = async_task,
> > + locker_func = locker_func,
> > internal = M,
> > }
> >
Please find below the fixed patch.
Changes in v3:
- Separated test for router and storage (rebased to existing tests)
- Locker wrapper function moved back to router/init.lua and storage/init.lua
- Error injection added
- Tabs removed
---
test/router/router.result | 39 ++++++++++++++++++++++++++++++++
test/router/router.test.lua | 14 ++++++++++++
test/storage/storage.result | 42 +++++++++++++++++++++++++++++++++++
test/storage/storage.test.lua | 15 +++++++++++++
vshard/router/init.lua | 35 ++++++++++++++++++++++++++---
vshard/storage/init.lua | 32 ++++++++++++++++++++++++--
6 files changed, 172 insertions(+), 5 deletions(-)
diff --git a/test/router/router.result b/test/router/router.result
index 000307d..ada8309 100644
--- a/test/router/router.result
+++ b/test/router/router.result
@@ -1140,6 +1140,45 @@ test_run:drop_cluster(REPLICASET_2)
while test_run:grep_log('router_1', 'disconnected from ') == nil do
fiber.sleep(0.1) end
---
...
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = require('localcfg').sharding}
+---
+...
+vshard = require('vshard')
+---
+...
+fiber = require('fiber')
+---
+...
+vshard.router.cfg(cfg)
+---
+...
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
+c = fiber.channel(2)
+---
+...
+f = function() fiber.create(function() local status, err =
pcall(vshard.router.cfg, cfg) c:put(status and true or false) end) end
+---
+...
+f()
+---
+...
+f()
+---
+...
+c:get()
+---
+- true
+...
+c:get()
+---
+- true
+...
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
_ = test_run:cmd("stop server router_1")
---
...
diff --git a/test/router/router.test.lua b/test/router/router.test.lua
index 9f32d3e..fab476e 100644
--- a/test/router/router.test.lua
+++ b/test/router/router.test.lua
@@ -440,6 +440,20 @@ test_run:drop_cluster(REPLICASET_2)
-- gh-24: log all connnect/disconnect events.
while test_run:grep_log('router_1', 'disconnected from ') == nil do
fiber.sleep(0.1) end
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = require('localcfg').sharding}
+vshard = require('vshard')
+fiber = require('fiber')
+vshard.router.cfg(cfg)
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+c = fiber.channel(2)
+f = function() fiber.create(function() local status, err =
pcall(vshard.router.cfg, cfg) c:put(status and true or false) end) end
+f()
+f()
+c:get()
+c:get()
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+
_ = test_run:cmd("stop server router_1")
_ = test_run:cmd("cleanup server router_1")
test_run:drop_cluster(REPLICASET_1)
diff --git a/test/storage/storage.result b/test/storage/storage.result
index e3e9e7f..0228445 100644
--- a/test/storage/storage.result
+++ b/test/storage/storage.result
@@ -688,6 +688,48 @@ rs:callro('echo', {'some_data'})
- null
- null
...
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = {}}
+---
+...
+cfg.sharding[box.info.cluster.uuid] = {replicas = {}}
+---
+...
+cfg.sharding[box.info.cluster.uuid].replicas[box.info.uuid] = {uri =
'storage:storage@127.0.0.1:3309', name = 'test_storage', master =
true}
+---
+...
+vshard = require('vshard')
+---
+...
+fiber = require('fiber')
+---
+...
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
+c = fiber.channel(2)
+---
+...
+f = function() fiber.create(function() local status, err =
pcall(vshard.storage.cfg, cfg, box.info.uuid) c:put(status and true or
false) end) end
+---
+...
+f()
+---
+...
+f()
+---
+...
+c:get()
+---
+- true
+...
+c:get()
+---
+- true
+...
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
_ = test_run:switch("default")
---
...
diff --git a/test/storage/storage.test.lua b/test/storage/storage.test.lua
index c07730b..6ceaa52 100644
--- a/test/storage/storage.test.lua
+++ b/test/storage/storage.test.lua
@@ -182,6 +182,21 @@ util.has_same_fields(old_internal, vshard.storage.internal)
_, rs = next(vshard.storage.internal.replicasets)
rs:callro('echo', {'some_data'})
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = {}}
+cfg.sharding[box.info.cluster.uuid] = {replicas = {}}
+cfg.sharding[box.info.cluster.uuid].replicas[box.info.uuid] = {uri =
'storage:storage@127.0.0.1:3309', name = 'test_storage', master =
true}
+vshard = require('vshard')
+fiber = require('fiber')
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+c = fiber.channel(2)
+f = function() fiber.create(function() local status, err =
pcall(vshard.storage.cfg, cfg, box.info.uuid) c:put(status and true or
false) end) end
+f()
+f()
+c:get()
+c:get()
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+
_ = test_run:switch("default")
test_run:drop_cluster(REPLICASET_2)
test_run:drop_cluster(REPLICASET_1)
diff --git a/vshard/router/init.lua b/vshard/router/init.lua
index 7573801..446b1a0 100644
--- a/vshard/router/init.lua
+++ b/vshard/router/init.lua
@@ -28,6 +28,7 @@ if not M then
---------------- Common module attributes ----------------
errinj = {
ERRINJ_CFG = false,
+ ERRINJ_MULTIPLE_CFG = false,
ERRINJ_FAILOVER_CHANGE_CFG = false,
ERRINJ_RELOAD = false,
ERRINJ_LONG_DISCOVERY = false,
@@ -53,6 +54,10 @@ local ROUTER_TEMPLATE = {
name = nil,
-- The last passed configuration.
current_cfg = nil,
+ -- Fiber channel as the locker to prevent multiple config.
+ cfg_lock = nil,
+ -- Configuration counter to control and verify locker.
+ cfg_counter = 0,
-- Time to outdate old objects on reload.
connection_outdate_delay = nil,
-- Bucket map cache.
@@ -594,6 +599,29 @@ local function router_cfg(router, cfg, is_reload)
end
end
+--------------------------------------------------------------------------------
+-- Configuration wrapper
+--------------------------------------------------------------------------------
+
+local function cfg_wrapper(router, ...)
+ local enable_lock = not M.errinj.ERRINJ_MULTIPLE_CFG
+ if enable_lock then
+ router.cfg_lock:put(true)
+ end
+ if router.cfg_counter > 0 then
+ error('Error: cfg_counter > 0')
+ end
+ router.cfg_counter = router.cfg_counter + 1
+ local status, err = pcall(router_cfg, router, ...)
+ router.cfg_counter = router.cfg_counter - 1
+ if enable_lock then
+ router.cfg_lock:get()
+ end
+ if not status then
+ error(err)
+ end
+end
+
--------------------------------------------------------------------------------
-- Bootstrap
--------------------------------------------------------------------------------
@@ -862,7 +890,7 @@ end
local router_mt = {
__index = {
- cfg = function(router, cfg) return router_cfg(router, cfg, false) end,
+ cfg = function(router, cfg) return cfg_wrapper(router, cfg, false) end,
info = router_info;
buckets_info = router_buckets_info;
call = router_call;
@@ -920,6 +948,7 @@ local function router_new(name, cfg)
local router = table.deepcopy(ROUTER_TEMPLATE)
setmetatable(router, router_mt)
router.name = name
+ router.cfg_lock = lfiber.channel(1)
M.routers[name] = router
local ok, err = pcall(router_cfg, router, cfg)
if not ok then
@@ -936,7 +965,7 @@ end
local function legacy_cfg(cfg)
if M.static_router then
-- Reconfigure.
- router_cfg(M.static_router, cfg, false)
+ cfg_wrapper(M.static_router, cfg, false)
else
-- Create new static instance.
local router, err = router_new(STATIC_ROUTER_NAME, cfg)
@@ -961,7 +990,7 @@ if not rawget(_G, MODULE_INTERNALS) then
rawset(_G, MODULE_INTERNALS, M)
else
for _, router in pairs(M.routers) do
- router_cfg(router, router.current_cfg, true)
+ cfg_wrapper(router, router.current_cfg, true)
setmetatable(router, router_mt)
end
if M.static_router then
diff --git a/vshard/storage/init.lua b/vshard/storage/init.lua
index dc059ba..7deb67b 100644
--- a/vshard/storage/init.lua
+++ b/vshard/storage/init.lua
@@ -48,6 +48,10 @@ if not M then
---------------- Common module attributes ----------------
-- The last passed configuration.
current_cfg = nil,
+ -- Fiber channel as the locker to prevent multiple config.
+ cfg_lock = lfiber.channel(1),
+ -- Configuration counter to control and verify locker.
+ cfg_counter = 0,
--
-- All known replicasets used for bucket re-balancing.
-- See format in replicaset.lua.
@@ -66,6 +70,7 @@ if not M then
total_bucket_count = 0,
errinj = {
ERRINJ_CFG = false,
+ ERRINJ_MULTIPLE_CFG = false,
ERRINJ_BUCKET_FIND_GARBAGE_DELAY = false,
ERRINJ_RELOAD = false,
ERRINJ_CFG_DELAY = false,
@@ -1843,6 +1848,29 @@ local function storage_cfg(cfg,
this_replica_uuid, is_reload)
collectgarbage()
end
+--------------------------------------------------------------------------------
+-- Configuration wrapper
+--------------------------------------------------------------------------------
+
+local function storage_cfg_wrapper(...)
+ local enable_lock = not M.errinj.ERRINJ_MULTIPLE_CFG
+ if enable_lock then
+ M.cfg_lock:put(true)
+ end
+ if M.cfg_counter > 0 then
+ error('Error: cfg_counter > 0')
+ end
+ M.cfg_counter = M.cfg_counter + 1
+ local status, err = pcall(storage_cfg, ...)
+ M.cfg_counter = M.cfg_counter - 1
+ if enable_lock then
+ M.cfg_lock:get()
+ end
+ if not status then
+ error(err)
+ end
+end
+
--------------------------------------------------------------------------------
-- Monitoring
--------------------------------------------------------------------------------
@@ -2060,7 +2088,7 @@ if not rawget(_G, MODULE_INTERNALS) then
rawset(_G, MODULE_INTERNALS, M)
else
reload_evolution.upgrade(M)
- storage_cfg(M.current_cfg, M.this_replica.uuid, true)
+ storage_cfg_wrapper(M.current_cfg, M.this_replica.uuid, true)
M.module_version = M.module_version + 1
end
@@ -2103,7 +2131,7 @@ return {
rebalancing_is_in_progress = rebalancing_is_in_progress,
recovery_wakeup = recovery_wakeup,
call = storage_call,
- cfg = function(cfg, uuid) return storage_cfg(cfg, uuid, false) end,
+ cfg = function(cfg, uuid) return storage_cfg_wrapper(cfg, uuid, false) end,
info = storage_info,
buckets_info = storage_buckets_info,
buckets_count = storage_buckets_count,
--
2.17.1.windows.1
^ permalink raw reply [flat|nested] 5+ messages in thread* [tarantool-patches] [PATCH V3] Prohibit router/storage configuration from different fibers
@ 2018-09-11 10:32 Evgeniy Zaikin
0 siblings, 0 replies; 5+ messages in thread
From: Evgeniy Zaikin @ 2018-09-11 10:32 UTC (permalink / raw)
To: tarantool-patches
From 5ce83d5db595455a14a58aedf9e6411f5adf1d7c Mon Sep 17 00:00:00 2001
From: rave4life <evgen4rave@gmail.com>
Date: Fri, 31 Aug 2018 16:41:11 +0300
Subject: [PATCH V3] Prohibit router/storage configuration from different fibers
Fixes: #140
---
Ticket:https://github.com/tarantool/vshard/issues/140
Branch:https://github.com/tarantool/vshard/tree/rave4life/gh-140-prohibit-multiple-cfg
On Thu, 30 Aug 2018 at 03:56, Vladislav Shpilevoy
<v.shpilevoy@tarantool.org> wrote:
>
> Hi! Thanks for the fixes. See 9 comments below.
>
> 1. Please, put your fixes inlined right after my
> remarks in a response email. It is hard sometimes
> so track which of my remarks are not fixed without
> this.
>
OK, see my patch below in this email.
> 2. Write all your questions about a patch into
> tarantool-patches. I paste here your question
> from a private email:
>
> > Hi! I have a question about writing test module. The test should fail
> > if patch (or any part of this patch) is absent. But it is difficult to
> > make it possible without any architectural distortion (e.g. without
> > making nested function calls, without redundant constructions and code
> > injection, without any overkills in working code). There are no
> > questions If no test needed, but...
> > So which way is correct:
> > 1. to make one more nested (redundant) call in router/storage code;
> > 2. to inject additional counters in 'vshard.util' module, witch
> > contains implementation of my path ?
> > Current PATCH v2, witch was already sent, implements 2nd way (test
> > fails if M.lock:put(true) / M.lock:get() is absent or disabled).
> > https://www.freelists.org/post/tarantool-patches/PATCH-v2-Prohibit-routerstorage-configuration-from-different-fibers
> >
> > Thank you for reviewing my patch.
>
> Answer is the following: neither of those things. Use M.errinj
> table for such error injections, as I said in the previous review.
> Look at its current content and how is it used to make the similar
> test for concurrent cfgs. Or dig into errinj.h in Tarantool to
> find which of existing ones can be used.
>
Fixed. M.errinj.ERRINJ_MULTIPLE_CFG was introduced.
> On 21/08/2018 06:27, Евгений Заикин wrote:
> > Adds prohibition of simultaneous router/storage configuration from
> > multiple fibers.
> > Fixes: #140
> >
> > ---
> > Ticket:https://github.com/tarantool/vshard/issues/140
> > Branch:https://github.com/tarantool/vshard/tree/rave4life/gh-140-prohibit-multiple-cfg
> >
> > Changes in v2:
> > - separated test for router and storage
> > - locker wrapper function moved to vshard.utils
> > test/router/multi_fiber_cfg.result | 38 +++++++++++++++++++++++++
> > test/router/multi_fiber_cfg.test.lua | 12 ++++++++
> > test/storage/multi_fiber_cfg.result | 41 +++++++++++++++++++++++++++
> > test/storage/multi_fiber_cfg.test.lua | 13 +++++++++
> > vshard/router/init.lua | 6 ++--
> > vshard/storage/init.lua | 4 +--
> > vshard/util.lua | 17 +++++++++++
> > 7 files changed, 126 insertions(+), 5 deletions(-)
> > create mode 100644 test/router/multi_fiber_cfg.result
> > create mode 100644 test/router/multi_fiber_cfg.test.lua
> > create mode 100644 test/storage/multi_fiber_cfg.result
> > create mode 100644 test/storage/multi_fiber_cfg.test.lua
> >
> > diff --git a/test/router/multi_fiber_cfg.result
> > b/test/router/multi_fiber_cfg.result
> > new file mode 100644
> > index 0000000..42a4055
> > --- /dev/null
> > +++ b/test/router/multi_fiber_cfg.result
> > @@ -0,0 +1,38 @@
> > +test_run = require('test_run').new()
> > +---
> > +...
> > +cfg = require('localcfg')
> > +---
> > +...
> > +cfg.memtx_memory = nil
>
> 3. Why do you modify cfg?
> The same question for storage test.
>
See 'localcfg.lua': memtx_memory = 100 * 1024 * 1024.
Cause memtx_memory always set to larger size in previous tests, an error occured
while vshard.router/vshard.storage applies this config:
cannot decrease memory size at runtime.
Removed obvious nullifying by reinitialization 'cfg' entries on-a-fly.
Should I kill all instances (or full cluster clleanup) before this test?
Prefered not to do it making tests run as fast as possible.
> > +---
> > +...
> > +vshard = require('vshard')
>
> 4. As I said in the previous review, please,
> put this test into router/router.test.lua. It
> is not worth a separate file.
OK, fixed.
>
> The same remark for storage test.
>
> > +---
> > +...
> > +fiber = require('fiber')
> > +---
> > +...
> > +vshard.router.cfg(cfg)
> > +---
> > +...
> > +c = fiber.channel(2)
> > +---
> > +...
> > +f = function() fiber.create(function() local status, err =
> > pcall(vshard.router.cfg, cfg) c:put(status and true or false) end) end
> > +---
> > +...
> > +f()
> > +---
> > +...
> > +f()
> > +---
> > +...
> > +c:get()
> > +---
> > +- true
> > +...
> > +c:get()
> > +---
> > +- true
> > +...
> > diff --git a/vshard/router/init.lua b/vshard/router/init.lua
> > index 60ceafa..6b7a2c5 100644
> > --- a/vshard/router/init.lua
> > +++ b/vshard/router/init.lua
> > @@ -860,7 +860,7 @@ end
> >
> > local router_mt = {
> > __index = {
> > - cfg = function(router, cfg) return router_cfg(router, cfg, false) end,
> > + cfg = function(router, cfg) return
> > util.locker_func(router_cfg, router, cfg, false) end,
>
> 5. Out of 80 symbols per line.
Fixed.
>
> > info = router_info;
> > buckets_info = router_buckets_info;
> > call = router_call;
> > diff --git a/vshard/storage/init.lua b/vshard/storage/init.lua
> > index f9b8000..83f7343 100644
> > --- a/vshard/storage/init.lua
> > +++ b/vshard/storage/init.lua
> > @@ -1871,7 +1871,7 @@ if not rawget(_G, MODULE_INTERNALS) then
> > rawset(_G, MODULE_INTERNALS, M)
> > else
> > reload_evolution.upgrade(M)
> > - storage_cfg(M.current_cfg, M.this_replica.uuid, true)
> > + util.locker_func(storage_cfg, M.current_cfg, M.this_replica.uuid, true)
>
> 6. Do not use tabs in Lua files for indentation.
>
OK, tabs are replaced by spaces.
> > M.module_version = M.module_version + 1
> > end
> >
> > @@ -1908,7 +1908,7 @@ return {
> > rebalancing_is_in_progress = rebalancing_is_in_progress,
> > recovery_wakeup = recovery_wakeup,
> > call = storage_call,
> > - cfg = function(cfg, uuid) return storage_cfg(cfg, uuid, false) end,
> > + cfg = function(cfg, uuid) return util.locker_func(storage_cfg,
> > cfg, uuid, false) end,
>
> 7. Out of 80.
>
Fixed.
> > info = storage_info,
> > buckets_info = storage_buckets_info,
> > buckets_count = storage_buckets_count,
> > diff --git a/vshard/util.lua b/vshard/util.lua
> > index 3afaa61..d52598b 100644
> > --- a/vshard/util.lua
> > +++ b/vshard/util.lua
> > @@ -134,10 +136,25 @@ local function async_task(delay, task, ...)
> > fiber.create(sync_task, delay, task, ...)
> > end
> >
> > +local function locker_func(f, ...)
> > + M.lock:put(true)
> > + if M.cfg_counter > 0 then
> > + error('Error: cfg_counter > 0')
> > + end
> > + M.cfg_counter = M.cfg_counter + 1
> > + local status, err = pcall(f, ...)
> > + M.cfg_counter = M.cfg_counter - 1
> > + M.lock:get()
> > + if not status then
> > + error(err)
> > + end
> > +end
>
> 8. Since you started working on this patch, multiple
> routers per process feature was pushed, so M now can
> not be used in router for the counter and the lock.
> Please, rebase. Now each router should have its own
> non-global lock.
>
Rebased, moved again to router and storage. Latch implementation
now is different for router and storage, because multiple routers
was pushed.
> 9. Please, write a comment to this function like it
> is done for other ones.
>
OK, short comment is written. But since latch wrapper function is
local per lua file, there is no need to write full description.
> > +
> > return {
> > tuple_extract_key = tuple_extract_key,
> > reloadable_fiber_create = reloadable_fiber_create,
> > generate_self_checker = generate_self_checker,
> > async_task = async_task,
> > + locker_func = locker_func,
> > internal = M,
> > }
> >
Please find below the fixed patch.
===================================
Changes in v3:
- Separated test for router and storage (rebased to existing tests)
- Locker wrapper function moved back to router/init.lua and storage/init.lua
- Error injection added
- Tabs removed
---
test/router/router.result | 39 ++++++++++++++++++++++++++++++++
test/router/router.test.lua | 14 ++++++++++++
test/storage/storage.result | 42 +++++++++++++++++++++++++++++++++++
test/storage/storage.test.lua | 15 +++++++++++++
vshard/router/init.lua | 35 ++++++++++++++++++++++++++---
vshard/storage/init.lua | 32 ++++++++++++++++++++++++--
6 files changed, 172 insertions(+), 5 deletions(-)
diff --git a/test/router/router.result b/test/router/router.result
index 000307d..ada8309 100644
--- a/test/router/router.result
+++ b/test/router/router.result
@@ -1140,6 +1140,45 @@ test_run:drop_cluster(REPLICASET_2)
while test_run:grep_log('router_1', 'disconnected from ') == nil do
fiber.sleep(0.1) end
---
...
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = require('localcfg').sharding}
+---
+...
+vshard = require('vshard')
+---
+...
+fiber = require('fiber')
+---
+...
+vshard.router.cfg(cfg)
+---
+...
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
+c = fiber.channel(2)
+---
+...
+f = function() fiber.create(function() local status, err =
pcall(vshard.router.cfg, cfg) c:put(status and true or false) end) end
+---
+...
+f()
+---
+...
+f()
+---
+...
+c:get()
+---
+- true
+...
+c:get()
+---
+- true
+...
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
_ = test_run:cmd("stop server router_1")
---
...
diff --git a/test/router/router.test.lua b/test/router/router.test.lua
index 9f32d3e..fab476e 100644
--- a/test/router/router.test.lua
+++ b/test/router/router.test.lua
@@ -440,6 +440,20 @@ test_run:drop_cluster(REPLICASET_2)
-- gh-24: log all connnect/disconnect events.
while test_run:grep_log('router_1', 'disconnected from ') == nil do
fiber.sleep(0.1) end
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = require('localcfg').sharding}
+vshard = require('vshard')
+fiber = require('fiber')
+vshard.router.cfg(cfg)
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+c = fiber.channel(2)
+f = function() fiber.create(function() local status, err =
pcall(vshard.router.cfg, cfg) c:put(status and true or false) end) end
+f()
+f()
+c:get()
+c:get()
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+
_ = test_run:cmd("stop server router_1")
_ = test_run:cmd("cleanup server router_1")
test_run:drop_cluster(REPLICASET_1)
diff --git a/test/storage/storage.result b/test/storage/storage.result
index e3e9e7f..0228445 100644
--- a/test/storage/storage.result
+++ b/test/storage/storage.result
@@ -688,6 +688,48 @@ rs:callro('echo', {'some_data'})
- null
- null
...
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = {}}
+---
+...
+cfg.sharding[box.info.cluster.uuid] = {replicas = {}}
+---
+...
+cfg.sharding[box.info.cluster.uuid].replicas[box.info.uuid] = {uri =
'storage:storage@127.0.0.1:3309', name = 'test_storage', master =
true}
+---
+...
+vshard = require('vshard')
+---
+...
+fiber = require('fiber')
+---
+...
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
+c = fiber.channel(2)
+---
+...
+f = function() fiber.create(function() local status, err =
pcall(vshard.storage.cfg, cfg, box.info.uuid) c:put(status and true or
false) end) end
+---
+...
+f()
+---
+...
+f()
+---
+...
+c:get()
+---
+- true
+...
+c:get()
+---
+- true
+...
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
_ = test_run:switch("default")
---
...
diff --git a/test/storage/storage.test.lua b/test/storage/storage.test.lua
index c07730b..6ceaa52 100644
--- a/test/storage/storage.test.lua
+++ b/test/storage/storage.test.lua
@@ -182,6 +182,21 @@ util.has_same_fields(old_internal, vshard.storage.internal)
_, rs = next(vshard.storage.internal.replicasets)
rs:callro('echo', {'some_data'})
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = {}}
+cfg.sharding[box.info.cluster.uuid] = {replicas = {}}
+cfg.sharding[box.info.cluster.uuid].replicas[box.info.uuid] = {uri =
'storage:storage@127.0.0.1:3309', name = 'test_storage', master =
true}
+vshard = require('vshard')
+fiber = require('fiber')
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+c = fiber.channel(2)
+f = function() fiber.create(function() local status, err =
pcall(vshard.storage.cfg, cfg, box.info.uuid) c:put(status and true or
false) end) end
+f()
+f()
+c:get()
+c:get()
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+
_ = test_run:switch("default")
test_run:drop_cluster(REPLICASET_2)
test_run:drop_cluster(REPLICASET_1)
diff --git a/vshard/router/init.lua b/vshard/router/init.lua
index 7573801..446b1a0 100644
--- a/vshard/router/init.lua
+++ b/vshard/router/init.lua
@@ -28,6 +28,7 @@ if not M then
---------------- Common module attributes ----------------
errinj = {
ERRINJ_CFG = false,
+ ERRINJ_MULTIPLE_CFG = false,
ERRINJ_FAILOVER_CHANGE_CFG = false,
ERRINJ_RELOAD = false,
ERRINJ_LONG_DISCOVERY = false,
@@ -53,6 +54,10 @@ local ROUTER_TEMPLATE = {
name = nil,
-- The last passed configuration.
current_cfg = nil,
+ -- Fiber channel as the locker to prevent multiple config.
+ cfg_lock = nil,
+ -- Configuration counter to control and verify locker.
+ cfg_counter = 0,
-- Time to outdate old objects on reload.
connection_outdate_delay = nil,
-- Bucket map cache.
@@ -594,6 +599,29 @@ local function router_cfg(router, cfg, is_reload)
end
end
+--------------------------------------------------------------------------------
+-- Configuration wrapper
+--------------------------------------------------------------------------------
+
+local function cfg_wrapper(router, ...)
+ local enable_lock = not M.errinj.ERRINJ_MULTIPLE_CFG
+ if enable_lock then
+ router.cfg_lock:put(true)
+ end
+ if router.cfg_counter > 0 then
+ error('Error: cfg_counter > 0')
+ end
+ router.cfg_counter = router.cfg_counter + 1
+ local status, err = pcall(router_cfg, router, ...)
+ router.cfg_counter = router.cfg_counter - 1
+ if enable_lock then
+ router.cfg_lock:get()
+ end
+ if not status then
+ error(err)
+ end
+end
+
--------------------------------------------------------------------------------
-- Bootstrap
--------------------------------------------------------------------------------
@@ -862,7 +890,7 @@ end
local router_mt = {
__index = {
- cfg = function(router, cfg) return router_cfg(router, cfg, false) end,
+ cfg = function(router, cfg) return cfg_wrapper(router, cfg, false) end,
info = router_info;
buckets_info = router_buckets_info;
call = router_call;
@@ -920,6 +948,7 @@ local function router_new(name, cfg)
local router = table.deepcopy(ROUTER_TEMPLATE)
setmetatable(router, router_mt)
router.name = name
+ router.cfg_lock = lfiber.channel(1)
M.routers[name] = router
local ok, err = pcall(router_cfg, router, cfg)
if not ok then
@@ -936,7 +965,7 @@ end
local function legacy_cfg(cfg)
if M.static_router then
-- Reconfigure.
- router_cfg(M.static_router, cfg, false)
+ cfg_wrapper(M.static_router, cfg, false)
else
-- Create new static instance.
local router, err = router_new(STATIC_ROUTER_NAME, cfg)
@@ -961,7 +990,7 @@ if not rawget(_G, MODULE_INTERNALS) then
rawset(_G, MODULE_INTERNALS, M)
else
for _, router in pairs(M.routers) do
- router_cfg(router, router.current_cfg, true)
+ cfg_wrapper(router, router.current_cfg, true)
setmetatable(router, router_mt)
end
if M.static_router then
diff --git a/vshard/storage/init.lua b/vshard/storage/init.lua
index dc059ba..7deb67b 100644
--- a/vshard/storage/init.lua
+++ b/vshard/storage/init.lua
@@ -48,6 +48,10 @@ if not M then
---------------- Common module attributes ----------------
-- The last passed configuration.
current_cfg = nil,
+ -- Fiber channel as the locker to prevent multiple config.
+ cfg_lock = lfiber.channel(1),
+ -- Configuration counter to control and verify locker.
+ cfg_counter = 0,
--
-- All known replicasets used for bucket re-balancing.
-- See format in replicaset.lua.
@@ -66,6 +70,7 @@ if not M then
total_bucket_count = 0,
errinj = {
ERRINJ_CFG = false,
+ ERRINJ_MULTIPLE_CFG = false,
ERRINJ_BUCKET_FIND_GARBAGE_DELAY = false,
ERRINJ_RELOAD = false,
ERRINJ_CFG_DELAY = false,
@@ -1843,6 +1848,29 @@ local function storage_cfg(cfg,
this_replica_uuid, is_reload)
collectgarbage()
end
+--------------------------------------------------------------------------------
+-- Configuration wrapper
+--------------------------------------------------------------------------------
+
+local function storage_cfg_wrapper(...)
+ local enable_lock = not M.errinj.ERRINJ_MULTIPLE_CFG
+ if enable_lock then
+ M.cfg_lock:put(true)
+ end
+ if M.cfg_counter > 0 then
+ error('Error: cfg_counter > 0')
+ end
+ M.cfg_counter = M.cfg_counter + 1
+ local status, err = pcall(storage_cfg, ...)
+ M.cfg_counter = M.cfg_counter - 1
+ if enable_lock then
+ M.cfg_lock:get()
+ end
+ if not status then
+ error(err)
+ end
+end
+
--------------------------------------------------------------------------------
-- Monitoring
--------------------------------------------------------------------------------
@@ -2060,7 +2088,7 @@ if not rawget(_G, MODULE_INTERNALS) then
rawset(_G, MODULE_INTERNALS, M)
else
reload_evolution.upgrade(M)
- storage_cfg(M.current_cfg, M.this_replica.uuid, true)
+ storage_cfg_wrapper(M.current_cfg, M.this_replica.uuid, true)
M.module_version = M.module_version + 1
end
@@ -2103,7 +2131,7 @@ return {
rebalancing_is_in_progress = rebalancing_is_in_progress,
recovery_wakeup = recovery_wakeup,
call = storage_call,
- cfg = function(cfg, uuid) return storage_cfg(cfg, uuid, false) end,
+ cfg = function(cfg, uuid) return storage_cfg_wrapper(cfg, uuid, false) end,
info = storage_info,
buckets_info = storage_buckets_info,
buckets_count = storage_buckets_count,
--
2.17.1.windows.1
^ permalink raw reply [flat|nested] 5+ messages in thread* [tarantool-patches] [PATCH V3] Prohibit router/storage configuration from different fibers
@ 2018-09-01 15:06 Evgeniy Zaikin
0 siblings, 0 replies; 5+ messages in thread
From: Evgeniy Zaikin @ 2018-09-01 15:06 UTC (permalink / raw)
To: tarantool-patches
On Thu, 30 Aug 2018 at 03:56, Vladislav Shpilevoy
<v.shpilevoy@tarantool.org> wrote:
>
> Hi! Thanks for the fixes. See 9 comments below.
>
> 1. Please, put your fixes inlined right after my
> remarks in a response email. It is hard sometimes
> so track which of my remarks are not fixed without
> this.
>
OK, see my patch below in this email.
> 2. Write all your questions about a patch into
> tarantool-patches. I paste here your question
> from a private email:
>
> > Hi! I have a question about writing test module. The test should fail
> > if patch (or any part of this patch) is absent. But it is difficult to
> > make it possible without any architectural distortion (e.g. without
> > making nested function calls, without redundant constructions and code
> > injection, without any overkills in working code). There are no
> > questions If no test needed, but...
> > So which way is correct:
> > 1. to make one more nested (redundant) call in router/storage code;
> > 2. to inject additional counters in 'vshard.util' module, witch
> > contains implementation of my path ?
> > Current PATCH v2, witch was already sent, implements 2nd way (test
> > fails if M.lock:put(true) / M.lock:get() is absent or disabled).
> > https://www.freelists.org/post/tarantool-patches/PATCH-v2-Prohibit-routerstorage-configuration-from-different-fibers
> >
> > Thank you for reviewing my patch.
>
> Answer is the following: neither of those things. Use M.errinj
> table for such error injections, as I said in the previous review.
> Look at its current content and how is it used to make the similar
> test for concurrent cfgs. Or dig into errinj.h in Tarantool to
> find which of existing ones can be used.
>
Fixed. M.errinj.ERRINJ_MULTIPLE_CFG was introduced.
> On 21/08/2018 06:27, Evgeniy Zaikin wrote:
> > Adds prohibition of simultaneous router/storage configuration from
> > multiple fibers.
> > Fixes: #140
> >
> > ---
> > Ticket:https://github.com/tarantool/vshard/issues/140
> > Branch:https://github.com/tarantool/vshard/tree/rave4life/gh-140-prohibit-multiple-cfg
> >
> > Changes in v2:
> > - separated test for router and storage
> > - locker wrapper function moved to vshard.utils
> > test/router/multi_fiber_cfg.result | 38 +++++++++++++++++++++++++
> > test/router/multi_fiber_cfg.test.lua | 12 ++++++++
> > test/storage/multi_fiber_cfg.result | 41 +++++++++++++++++++++++++++
> > test/storage/multi_fiber_cfg.test.lua | 13 +++++++++
> > vshard/router/init.lua | 6 ++--
> > vshard/storage/init.lua | 4 +--
> > vshard/util.lua | 17 +++++++++++
> > 7 files changed, 126 insertions(+), 5 deletions(-)
> > create mode 100644 test/router/multi_fiber_cfg.result
> > create mode 100644 test/router/multi_fiber_cfg.test.lua
> > create mode 100644 test/storage/multi_fiber_cfg.result
> > create mode 100644 test/storage/multi_fiber_cfg.test.lua
> >
> > diff --git a/test/router/multi_fiber_cfg.result
> > b/test/router/multi_fiber_cfg.result
> > new file mode 100644
> > index 0000000..42a4055
> > --- /dev/null
> > +++ b/test/router/multi_fiber_cfg.result
> > @@ -0,0 +1,38 @@
> > +test_run = require('test_run').new()
> > +---
> > +...
> > +cfg = require('localcfg')
> > +---
> > +...
> > +cfg.memtx_memory = nil
>
> 3. Why do you modify cfg?
> The same question for storage test.
>
See 'localcfg.lua': memtx_memory = 100 * 1024 * 1024.
Cause memtx_memory always set to larger size in previous tests, an error occured
while vshard.router/vshard.storage applies this config:
cannot decrease memory size at runtime.
Removed obvious nullifying by reinitialization 'cfg' entries on-a-fly.
Should I kill all instances (or full cluster clleanup) before this test?
Prefered not to do it making tests run as fast as possible.
> > +---
> > +...
> > +vshard = require('vshard')
>
> 4. As I said in the previous review, please,
> put this test into router/router.test.lua. It
> is not worth a separate file.
OK, fixed.
>
> The same remark for storage test.
>
> > +---
> > +...
> > +fiber = require('fiber')
> > +---
> > +...
> > +vshard.router.cfg(cfg)
> > +---
> > +...
> > +c = fiber.channel(2)
> > +---
> > +...
> > +f = function() fiber.create(function() local status, err =
> > pcall(vshard.router.cfg, cfg) c:put(status and true or false) end) end
> > +---
> > +...
> > +f()
> > +---
> > +...
> > +f()
> > +---
> > +...
> > +c:get()
> > +---
> > +- true
> > +...
> > +c:get()
> > +---
> > +- true
> > +...
> > diff --git a/vshard/router/init.lua b/vshard/router/init.lua
> > index 60ceafa..6b7a2c5 100644
> > --- a/vshard/router/init.lua
> > +++ b/vshard/router/init.lua
> > @@ -860,7 +860,7 @@ end
> >
> > local router_mt = {
> > __index = {
> > - cfg = function(router, cfg) return router_cfg(router, cfg, false) end,
> > + cfg = function(router, cfg) return
> > util.locker_func(router_cfg, router, cfg, false) end,
>
> 5. Out of 80 symbols per line.
Fixed.
>
> > info = router_info;
> > buckets_info = router_buckets_info;
> > call = router_call;
> > diff --git a/vshard/storage/init.lua b/vshard/storage/init.lua
> > index f9b8000..83f7343 100644
> > --- a/vshard/storage/init.lua
> > +++ b/vshard/storage/init.lua
> > @@ -1871,7 +1871,7 @@ if not rawget(_G, MODULE_INTERNALS) then
> > rawset(_G, MODULE_INTERNALS, M)
> > else
> > reload_evolution.upgrade(M)
> > - storage_cfg(M.current_cfg, M.this_replica.uuid, true)
> > + util.locker_func(storage_cfg, M.current_cfg, M.this_replica.uuid, true)
>
> 6. Do not use tabs in Lua files for indentation.
>
OK, tabs are replaced by spaces.
> > M.module_version = M.module_version + 1
> > end
> >
> > @@ -1908,7 +1908,7 @@ return {
> > rebalancing_is_in_progress = rebalancing_is_in_progress,
> > recovery_wakeup = recovery_wakeup,
> > call = storage_call,
> > - cfg = function(cfg, uuid) return storage_cfg(cfg, uuid, false) end,
> > + cfg = function(cfg, uuid) return util.locker_func(storage_cfg,
> > cfg, uuid, false) end,
>
> 7. Out of 80.
>
Fixed.
> > info = storage_info,
> > buckets_info = storage_buckets_info,
> > buckets_count = storage_buckets_count,
> > diff --git a/vshard/util.lua b/vshard/util.lua
> > index 3afaa61..d52598b 100644
> > --- a/vshard/util.lua
> > +++ b/vshard/util.lua
> > @@ -134,10 +136,25 @@ local function async_task(delay, task, ...)
> > fiber.create(sync_task, delay, task, ...)
> > end
> >
> > +local function locker_func(f, ...)
> > + M.lock:put(true)
> > + if M.cfg_counter > 0 then
> > + error('Error: cfg_counter > 0')
> > + end
> > + M.cfg_counter = M.cfg_counter + 1
> > + local status, err = pcall(f, ...)
> > + M.cfg_counter = M.cfg_counter - 1
> > + M.lock:get()
> > + if not status then
> > + error(err)
> > + end
> > +end
>
> 8. Since you started working on this patch, multiple
> routers per process feature was pushed, so M now can
> not be used in router for the counter and the lock.
> Please, rebase. Now each router should have its own
> non-global lock.
>
Rebased, moved again to router and storage. Latch implementation
now is different for router and storage, because multiple routers
was pushed.
> 9. Please, write a comment to this function like it
> is done for other ones.
>
OK, short comment is written. But since latch wrapper function is
local per lua file, there is no need to write full description.
> > +
> > return {
> > tuple_extract_key = tuple_extract_key,
> > reloadable_fiber_create = reloadable_fiber_create,
> > generate_self_checker = generate_self_checker,
> > async_task = async_task,
> > + locker_func = locker_func,
> > internal = M,
> > }
> >
Please find below the fixed patch.
***********************************
From 5ce83d5db595455a14a58aedf9e6411f5adf1d7c Mon Sep 17 00:00:00 2001
From: rave4life <evgen4rave@gmail.com>
Date: Fri, 31 Aug 2018 16:41:11 +0300
Subject: [PATCH V3] Prohibit router/storage configuration from different fibers
Fixes: #140
---
Ticket:https://github.com/tarantool/vshard/issues/140
Branch:https://github.com/tarantool/vshard/tree/rave4life/gh-140-prohibit-multiple-cfg
Changes in v3:
- Separated test for router and storage (rebased to existing tests)
- Locker wrapper function moved back to router/init.lua and storage/init.lua
- Error injection added
- Tabs removed
---
test/router/router.result | 39 ++++++++++++++++++++++++++++++++
test/router/router.test.lua | 14 ++++++++++++
test/storage/storage.result | 42 +++++++++++++++++++++++++++++++++++
test/storage/storage.test.lua | 15 +++++++++++++
vshard/router/init.lua | 35 ++++++++++++++++++++++++++---
vshard/storage/init.lua | 32 ++++++++++++++++++++++++--
6 files changed, 172 insertions(+), 5 deletions(-)
diff --git a/test/router/router.result b/test/router/router.result
index 000307d..ada8309 100644
--- a/test/router/router.result
+++ b/test/router/router.result
@@ -1140,6 +1140,45 @@ test_run:drop_cluster(REPLICASET_2)
while test_run:grep_log('router_1', 'disconnected from ') == nil do
fiber.sleep(0.1) end
---
...
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = require('localcfg').sharding}
+---
+...
+vshard = require('vshard')
+---
+...
+fiber = require('fiber')
+---
+...
+vshard.router.cfg(cfg)
+---
+...
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
+c = fiber.channel(2)
+---
+...
+f = function() fiber.create(function() local status, err =
pcall(vshard.router.cfg, cfg) c:put(status and true or false) end) end
+---
+...
+f()
+---
+...
+f()
+---
+...
+c:get()
+---
+- true
+...
+c:get()
+---
+- true
+...
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
_ = test_run:cmd("stop server router_1")
---
...
diff --git a/test/router/router.test.lua b/test/router/router.test.lua
index 9f32d3e..fab476e 100644
--- a/test/router/router.test.lua
+++ b/test/router/router.test.lua
@@ -440,6 +440,20 @@ test_run:drop_cluster(REPLICASET_2)
-- gh-24: log all connnect/disconnect events.
while test_run:grep_log('router_1', 'disconnected from ') == nil do
fiber.sleep(0.1) end
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = require('localcfg').sharding}
+vshard = require('vshard')
+fiber = require('fiber')
+vshard.router.cfg(cfg)
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+c = fiber.channel(2)
+f = function() fiber.create(function() local status, err =
pcall(vshard.router.cfg, cfg) c:put(status and true or false) end) end
+f()
+f()
+c:get()
+c:get()
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+
_ = test_run:cmd("stop server router_1")
_ = test_run:cmd("cleanup server router_1")
test_run:drop_cluster(REPLICASET_1)
diff --git a/test/storage/storage.result b/test/storage/storage.result
index e3e9e7f..0228445 100644
--- a/test/storage/storage.result
+++ b/test/storage/storage.result
@@ -688,6 +688,48 @@ rs:callro('echo', {'some_data'})
- null
- null
...
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = {}}
+---
+...
+cfg.sharding[box.info.cluster.uuid] = {replicas = {}}
+---
+...
+cfg.sharding[box.info.cluster.uuid].replicas[box.info.uuid] = {uri =
'storage:storage@127.0.0.1:3309', name = 'test_storage', master =
true}
+---
+...
+vshard = require('vshard')
+---
+...
+fiber = require('fiber')
+---
+...
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
+c = fiber.channel(2)
+---
+...
+f = function() fiber.create(function() local status, err =
pcall(vshard.storage.cfg, cfg, box.info.uuid) c:put(status and true or
false) end) end
+---
+...
+f()
+---
+...
+f()
+---
+...
+c:get()
+---
+- true
+...
+c:get()
+---
+- true
+...
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
_ = test_run:switch("default")
---
...
diff --git a/test/storage/storage.test.lua b/test/storage/storage.test.lua
index c07730b..6ceaa52 100644
--- a/test/storage/storage.test.lua
+++ b/test/storage/storage.test.lua
@@ -182,6 +182,21 @@ util.has_same_fields(old_internal, vshard.storage.internal)
_, rs = next(vshard.storage.internal.replicasets)
rs:callro('echo', {'some_data'})
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = {}}
+cfg.sharding[box.info.cluster.uuid] = {replicas = {}}
+cfg.sharding[box.info.cluster.uuid].replicas[box.info.uuid] = {uri =
'storage:storage@127.0.0.1:3309', name = 'test_storage', master =
true}
+vshard = require('vshard')
+fiber = require('fiber')
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+c = fiber.channel(2)
+f = function() fiber.create(function() local status, err =
pcall(vshard.storage.cfg, cfg, box.info.uuid) c:put(status and true or
false) end) end
+f()
+f()
+c:get()
+c:get()
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+
_ = test_run:switch("default")
test_run:drop_cluster(REPLICASET_2)
test_run:drop_cluster(REPLICASET_1)
diff --git a/vshard/router/init.lua b/vshard/router/init.lua
index 7573801..446b1a0 100644
--- a/vshard/router/init.lua
+++ b/vshard/router/init.lua
@@ -28,6 +28,7 @@ if not M then
---------------- Common module attributes ----------------
errinj = {
ERRINJ_CFG = false,
+ ERRINJ_MULTIPLE_CFG = false,
ERRINJ_FAILOVER_CHANGE_CFG = false,
ERRINJ_RELOAD = false,
ERRINJ_LONG_DISCOVERY = false,
@@ -53,6 +54,10 @@ local ROUTER_TEMPLATE = {
name = nil,
-- The last passed configuration.
current_cfg = nil,
+ -- Fiber channel as the locker to prevent multiple config.
+ cfg_lock = nil,
+ -- Configuration counter to control and verify locker.
+ cfg_counter = 0,
-- Time to outdate old objects on reload.
connection_outdate_delay = nil,
-- Bucket map cache.
@@ -594,6 +599,29 @@ local function router_cfg(router, cfg, is_reload)
end
end
+--------------------------------------------------------------------------------
+-- Configuration wrapper
+--------------------------------------------------------------------------------
+
+local function cfg_wrapper(router, ...)
+ local enable_lock = not M.errinj.ERRINJ_MULTIPLE_CFG
+ if enable_lock then
+ router.cfg_lock:put(true)
+ end
+ if router.cfg_counter > 0 then
+ error('Error: cfg_counter > 0')
+ end
+ router.cfg_counter = router.cfg_counter + 1
+ local status, err = pcall(router_cfg, router, ...)
+ router.cfg_counter = router.cfg_counter - 1
+ if enable_lock then
+ router.cfg_lock:get()
+ end
+ if not status then
+ error(err)
+ end
+end
+
--------------------------------------------------------------------------------
-- Bootstrap
--------------------------------------------------------------------------------
@@ -862,7 +890,7 @@ end
local router_mt = {
__index = {
- cfg = function(router, cfg) return router_cfg(router, cfg, false) end,
+ cfg = function(router, cfg) return cfg_wrapper(router, cfg, false) end,
info = router_info;
buckets_info = router_buckets_info;
call = router_call;
@@ -920,6 +948,7 @@ local function router_new(name, cfg)
local router = table.deepcopy(ROUTER_TEMPLATE)
setmetatable(router, router_mt)
router.name = name
+ router.cfg_lock = lfiber.channel(1)
M.routers[name] = router
local ok, err = pcall(router_cfg, router, cfg)
if not ok then
@@ -936,7 +965,7 @@ end
local function legacy_cfg(cfg)
if M.static_router then
-- Reconfigure.
- router_cfg(M.static_router, cfg, false)
+ cfg_wrapper(M.static_router, cfg, false)
else
-- Create new static instance.
local router, err = router_new(STATIC_ROUTER_NAME, cfg)
@@ -961,7 +990,7 @@ if not rawget(_G, MODULE_INTERNALS) then
rawset(_G, MODULE_INTERNALS, M)
else
for _, router in pairs(M.routers) do
- router_cfg(router, router.current_cfg, true)
+ cfg_wrapper(router, router.current_cfg, true)
setmetatable(router, router_mt)
end
if M.static_router then
diff --git a/vshard/storage/init.lua b/vshard/storage/init.lua
index dc059ba..7deb67b 100644
--- a/vshard/storage/init.lua
+++ b/vshard/storage/init.lua
@@ -48,6 +48,10 @@ if not M then
---------------- Common module attributes ----------------
-- The last passed configuration.
current_cfg = nil,
+ -- Fiber channel as the locker to prevent multiple config.
+ cfg_lock = lfiber.channel(1),
+ -- Configuration counter to control and verify locker.
+ cfg_counter = 0,
--
-- All known replicasets used for bucket re-balancing.
-- See format in replicaset.lua.
@@ -66,6 +70,7 @@ if not M then
total_bucket_count = 0,
errinj = {
ERRINJ_CFG = false,
+ ERRINJ_MULTIPLE_CFG = false,
ERRINJ_BUCKET_FIND_GARBAGE_DELAY = false,
ERRINJ_RELOAD = false,
ERRINJ_CFG_DELAY = false,
@@ -1843,6 +1848,29 @@ local function storage_cfg(cfg,
this_replica_uuid, is_reload)
collectgarbage()
end
+--------------------------------------------------------------------------------
+-- Configuration wrapper
+--------------------------------------------------------------------------------
+
+local function storage_cfg_wrapper(...)
+ local enable_lock = not M.errinj.ERRINJ_MULTIPLE_CFG
+ if enable_lock then
+ M.cfg_lock:put(true)
+ end
+ if M.cfg_counter > 0 then
+ error('Error: cfg_counter > 0')
+ end
+ M.cfg_counter = M.cfg_counter + 1
+ local status, err = pcall(storage_cfg, ...)
+ M.cfg_counter = M.cfg_counter - 1
+ if enable_lock then
+ M.cfg_lock:get()
+ end
+ if not status then
+ error(err)
+ end
+end
+
--------------------------------------------------------------------------------
-- Monitoring
--------------------------------------------------------------------------------
@@ -2060,7 +2088,7 @@ if not rawget(_G, MODULE_INTERNALS) then
rawset(_G, MODULE_INTERNALS, M)
else
reload_evolution.upgrade(M)
- storage_cfg(M.current_cfg, M.this_replica.uuid, true)
+ storage_cfg_wrapper(M.current_cfg, M.this_replica.uuid, true)
M.module_version = M.module_version + 1
end
@@ -2103,7 +2131,7 @@ return {
rebalancing_is_in_progress = rebalancing_is_in_progress,
recovery_wakeup = recovery_wakeup,
call = storage_call,
- cfg = function(cfg, uuid) return storage_cfg(cfg, uuid, false) end,
+ cfg = function(cfg, uuid) return storage_cfg_wrapper(cfg, uuid, false) end,
info = storage_info,
buckets_info = storage_buckets_info,
buckets_count = storage_buckets_count,
--
2.17.1.windows.1
^ permalink raw reply [flat|nested] 5+ messages in thread* [tarantool-patches] [PATCH V3] Prohibit router/storage configuration from different fibers
@ 2018-09-01 12:17 Evgeniy Zaikin
0 siblings, 0 replies; 5+ messages in thread
From: Evgeniy Zaikin @ 2018-09-01 12:17 UTC (permalink / raw)
To: tarantool-patches
===================================
On Thu, 30 Aug 2018 at 03:56, Vladislav Shpilevoy
<v.shpilevoy@tarantool.org> wrote:
>
> Hi! Thanks for the fixes. See 9 comments below.
>
> 1. Please, put your fixes inlined right after my
> remarks in a response email. It is hard sometimes
> so track which of my remarks are not fixed without
> this.
>
OK, see my patch below in this email.
> 2. Write all your questions about a patch into
> tarantool-patches. I paste here your question
> from a private email:
>
> > Hi! I have a question about writing test module. The test should fail
> > if patch (or any part of this patch) is absent. But it is difficult to
> > make it possible without any architectural distortion (e.g. without
> > making nested function calls, without redundant constructions and code
> > injection, without any overkills in working code). There are no
> > questions If no test needed, but...
> > So which way is correct:
> > 1. to make one more nested (redundant) call in router/storage code;
> > 2. to inject additional counters in 'vshard.util' module, witch
> > contains implementation of my path ?
> > Current PATCH v2, witch was already sent, implements 2nd way (test
> > fails if M.lock:put(true) / M.lock:get() is absent or disabled).
> > https://www.freelists.org/post/tarantool-patches/PATCH-v2-Prohibit-routerstorage-configuration-from-different-fibers
> >
> > Thank you for reviewing my patch.
>
> Answer is the following: neither of those things. Use M.errinj
> table for such error injections, as I said in the previous review.
> Look at its current content and how is it used to make the similar
> test for concurrent cfgs. Or dig into errinj.h in Tarantool to
> find which of existing ones can be used.
>
Fixed. M.errinj.ERRINJ_MULTIPLE_CFG was introduced.
> On 21/08/2018 06:27, Evgeniy Zaikin wrote:
> > Adds prohibition of simultaneous router/storage configuration from
> > multiple fibers.
> > Fixes: #140
> >
> > ---
> > Ticket:https://github.com/tarantool/vshard/issues/140
> > Branch:https://github.com/tarantool/vshard/tree/rave4life/gh-140-prohibit-multiple-cfg
> >
> > Changes in v2:
> > - separated test for router and storage
> > - locker wrapper function moved to vshard.utils
> > test/router/multi_fiber_cfg.result | 38 +++++++++++++++++++++++++
> > test/router/multi_fiber_cfg.test.lua | 12 ++++++++
> > test/storage/multi_fiber_cfg.result | 41 +++++++++++++++++++++++++++
> > test/storage/multi_fiber_cfg.test.lua | 13 +++++++++
> > vshard/router/init.lua | 6 ++--
> > vshard/storage/init.lua | 4 +--
> > vshard/util.lua | 17 +++++++++++
> > 7 files changed, 126 insertions(+), 5 deletions(-)
> > create mode 100644 test/router/multi_fiber_cfg.result
> > create mode 100644 test/router/multi_fiber_cfg.test.lua
> > create mode 100644 test/storage/multi_fiber_cfg.result
> > create mode 100644 test/storage/multi_fiber_cfg.test.lua
> >
> > diff --git a/test/router/multi_fiber_cfg.result
> > b/test/router/multi_fiber_cfg.result
> > new file mode 100644
> > index 0000000..42a4055
> > --- /dev/null
> > +++ b/test/router/multi_fiber_cfg.result
> > @@ -0,0 +1,38 @@
> > +test_run = require('test_run').new()
> > +---
> > +...
> > +cfg = require('localcfg')
> > +---
> > +...
> > +cfg.memtx_memory = nil
>
> 3. Why do you modify cfg?
> The same question for storage test.
>
See 'localcfg.lua': memtx_memory = 100 * 1024 * 1024.
Cause memtx_memory always set to larger size in previous tests, an error occured
while vshard.router/vshard.storage applies this config:
cannot decrease memory size at runtime.
Removed obvious nullifying by reinitialization 'cfg' entries on-a-fly.
Should I kill all instances (or full cluster clleanup) before this test?
Prefered not to do it making tests run as fast as possible.
> > +---
> > +...
> > +vshard = require('vshard')
>
> 4. As I said in the previous review, please,
> put this test into router/router.test.lua. It
> is not worth a separate file.
OK, fixed.
>
> The same remark for storage test.
>
> > +---
> > +...
> > +fiber = require('fiber')
> > +---
> > +...
> > +vshard.router.cfg(cfg)
> > +---
> > +...
> > +c = fiber.channel(2)
> > +---
> > +...
> > +f = function() fiber.create(function() local status, err =
> > pcall(vshard.router.cfg, cfg) c:put(status and true or false) end) end
> > +---
> > +...
> > +f()
> > +---
> > +...
> > +f()
> > +---
> > +...
> > +c:get()
> > +---
> > +- true
> > +...
> > +c:get()
> > +---
> > +- true
> > +...
> > diff --git a/vshard/router/init.lua b/vshard/router/init.lua
> > index 60ceafa..6b7a2c5 100644
> > --- a/vshard/router/init.lua
> > +++ b/vshard/router/init.lua
> > @@ -860,7 +860,7 @@ end
> >
> > local router_mt = {
> > __index = {
> > - cfg = function(router, cfg) return router_cfg(router, cfg, false) end,
> > + cfg = function(router, cfg) return
> > util.locker_func(router_cfg, router, cfg, false) end,
>
> 5. Out of 80 symbols per line.
Fixed.
>
> > info = router_info;
> > buckets_info = router_buckets_info;
> > call = router_call;
> > diff --git a/vshard/storage/init.lua b/vshard/storage/init.lua
> > index f9b8000..83f7343 100644
> > --- a/vshard/storage/init.lua
> > +++ b/vshard/storage/init.lua
> > @@ -1871,7 +1871,7 @@ if not rawget(_G, MODULE_INTERNALS) then
> > rawset(_G, MODULE_INTERNALS, M)
> > else
> > reload_evolution.upgrade(M)
> > - storage_cfg(M.current_cfg, M.this_replica.uuid, true)
> > + util.locker_func(storage_cfg, M.current_cfg, M.this_replica.uuid, true)
>
> 6. Do not use tabs in Lua files for indentation.
>
OK, tabs are replaced by spaces.
> > M.module_version = M.module_version + 1
> > end
> >
> > @@ -1908,7 +1908,7 @@ return {
> > rebalancing_is_in_progress = rebalancing_is_in_progress,
> > recovery_wakeup = recovery_wakeup,
> > call = storage_call,
> > - cfg = function(cfg, uuid) return storage_cfg(cfg, uuid, false) end,
> > + cfg = function(cfg, uuid) return util.locker_func(storage_cfg,
> > cfg, uuid, false) end,
>
> 7. Out of 80.
>
Fixed.
> > info = storage_info,
> > buckets_info = storage_buckets_info,
> > buckets_count = storage_buckets_count,
> > diff --git a/vshard/util.lua b/vshard/util.lua
> > index 3afaa61..d52598b 100644
> > --- a/vshard/util.lua
> > +++ b/vshard/util.lua
> > @@ -134,10 +136,25 @@ local function async_task(delay, task, ...)
> > fiber.create(sync_task, delay, task, ...)
> > end
> >
> > +local function locker_func(f, ...)
> > + M.lock:put(true)
> > + if M.cfg_counter > 0 then
> > + error('Error: cfg_counter > 0')
> > + end
> > + M.cfg_counter = M.cfg_counter + 1
> > + local status, err = pcall(f, ...)
> > + M.cfg_counter = M.cfg_counter - 1
> > + M.lock:get()
> > + if not status then
> > + error(err)
> > + end
> > +end
>
> 8. Since you started working on this patch, multiple
> routers per process feature was pushed, so M now can
> not be used in router for the counter and the lock.
> Please, rebase. Now each router should have its own
> non-global lock.
>
Rebased, moved again to router and storage. Latch implementation
now is different for router and storage, because multiple routers
was pushed.
> 9. Please, write a comment to this function like it
> is done for other ones.
>
OK, short comment is written. But since latch wrapper function is
local per lua file, there is no need to write full description.
> > +
> > return {
> > tuple_extract_key = tuple_extract_key,
> > reloadable_fiber_create = reloadable_fiber_create,
> > generate_self_checker = generate_self_checker,
> > async_task = async_task,
> > + locker_func = locker_func,
> > internal = M,
> > }
> >
Please find below the fixed patch.
===================================
From 5ce83d5db595455a14a58aedf9e6411f5adf1d7c Mon Sep 17 00:00:00 2001
From: rave4life <evgen4rave@gmail.com>
Date: Fri, 31 Aug 2018 16:41:11 +0300
Subject: [PATCH V3] Prohibit router/storage configuration from different fibers
Fixes: #140
---
Ticket:https://github.com/tarantool/vshard/issues/140
Branch:https://github.com/tarantool/vshard/tree/rave4life/gh-140-prohibit-multiple-cfg
Changes in v3:
- Separated test for router and storage (rebased to existing tests)
- Locker wrapper function moved back to router/init.lua and storage/init.lua
- Error injection added
- Tabs removed
---
test/router/router.result | 39 ++++++++++++++++++++++++++++++++
test/router/router.test.lua | 14 ++++++++++++
test/storage/storage.result | 42 +++++++++++++++++++++++++++++++++++
test/storage/storage.test.lua | 15 +++++++++++++
vshard/router/init.lua | 35 ++++++++++++++++++++++++++---
vshard/storage/init.lua | 32 ++++++++++++++++++++++++--
6 files changed, 172 insertions(+), 5 deletions(-)
diff --git a/test/router/router.result b/test/router/router.result
index 000307d..ada8309 100644
--- a/test/router/router.result
+++ b/test/router/router.result
@@ -1140,6 +1140,45 @@ test_run:drop_cluster(REPLICASET_2)
while test_run:grep_log('router_1', 'disconnected from ') == nil do
fiber.sleep(0.1) end
---
...
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = require('localcfg').sharding}
+---
+...
+vshard = require('vshard')
+---
+...
+fiber = require('fiber')
+---
+...
+vshard.router.cfg(cfg)
+---
+...
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
+c = fiber.channel(2)
+---
+...
+f = function() fiber.create(function() local status, err =
pcall(vshard.router.cfg, cfg) c:put(status and true or false) end) end
+---
+...
+f()
+---
+...
+f()
+---
+...
+c:get()
+---
+- true
+...
+c:get()
+---
+- true
+...
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
_ = test_run:cmd("stop server router_1")
---
...
diff --git a/test/router/router.test.lua b/test/router/router.test.lua
index 9f32d3e..fab476e 100644
--- a/test/router/router.test.lua
+++ b/test/router/router.test.lua
@@ -440,6 +440,20 @@ test_run:drop_cluster(REPLICASET_2)
-- gh-24: log all connnect/disconnect events.
while test_run:grep_log('router_1', 'disconnected from ') == nil do
fiber.sleep(0.1) end
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = require('localcfg').sharding}
+vshard = require('vshard')
+fiber = require('fiber')
+vshard.router.cfg(cfg)
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+c = fiber.channel(2)
+f = function() fiber.create(function() local status, err =
pcall(vshard.router.cfg, cfg) c:put(status and true or false) end) end
+f()
+f()
+c:get()
+c:get()
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+
_ = test_run:cmd("stop server router_1")
_ = test_run:cmd("cleanup server router_1")
test_run:drop_cluster(REPLICASET_1)
diff --git a/test/storage/storage.result b/test/storage/storage.result
index e3e9e7f..0228445 100644
--- a/test/storage/storage.result
+++ b/test/storage/storage.result
@@ -688,6 +688,48 @@ rs:callro('echo', {'some_data'})
- null
- null
...
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = {}}
+---
+...
+cfg.sharding[box.info.cluster.uuid] = {replicas = {}}
+---
+...
+cfg.sharding[box.info.cluster.uuid].replicas[box.info.uuid] = {uri =
'storage:storage@127.0.0.1:3309', name = 'test_storage', master =
true}
+---
+...
+vshard = require('vshard')
+---
+...
+fiber = require('fiber')
+---
+...
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
+c = fiber.channel(2)
+---
+...
+f = function() fiber.create(function() local status, err =
pcall(vshard.storage.cfg, cfg, box.info.uuid) c:put(status and true or
false) end) end
+---
+...
+f()
+---
+...
+f()
+---
+...
+c:get()
+---
+- true
+...
+c:get()
+---
+- true
+...
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
_ = test_run:switch("default")
---
...
diff --git a/test/storage/storage.test.lua b/test/storage/storage.test.lua
index c07730b..6ceaa52 100644
--- a/test/storage/storage.test.lua
+++ b/test/storage/storage.test.lua
@@ -182,6 +182,21 @@ util.has_same_fields(old_internal, vshard.storage.internal)
_, rs = next(vshard.storage.internal.replicasets)
rs:callro('echo', {'some_data'})
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = {}}
+cfg.sharding[box.info.cluster.uuid] = {replicas = {}}
+cfg.sharding[box.info.cluster.uuid].replicas[box.info.uuid] = {uri =
'storage:storage@127.0.0.1:3309', name = 'test_storage', master =
true}
+vshard = require('vshard')
+fiber = require('fiber')
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+c = fiber.channel(2)
+f = function() fiber.create(function() local status, err =
pcall(vshard.storage.cfg, cfg, box.info.uuid) c:put(status and true or
false) end) end
+f()
+f()
+c:get()
+c:get()
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+
_ = test_run:switch("default")
test_run:drop_cluster(REPLICASET_2)
test_run:drop_cluster(REPLICASET_1)
diff --git a/vshard/router/init.lua b/vshard/router/init.lua
index 7573801..446b1a0 100644
--- a/vshard/router/init.lua
+++ b/vshard/router/init.lua
@@ -28,6 +28,7 @@ if not M then
---------------- Common module attributes ----------------
errinj = {
ERRINJ_CFG = false,
+ ERRINJ_MULTIPLE_CFG = false,
ERRINJ_FAILOVER_CHANGE_CFG = false,
ERRINJ_RELOAD = false,
ERRINJ_LONG_DISCOVERY = false,
@@ -53,6 +54,10 @@ local ROUTER_TEMPLATE = {
name = nil,
-- The last passed configuration.
current_cfg = nil,
+ -- Fiber channel as the locker to prevent multiple config.
+ cfg_lock = nil,
+ -- Configuration counter to control and verify locker.
+ cfg_counter = 0,
-- Time to outdate old objects on reload.
connection_outdate_delay = nil,
-- Bucket map cache.
@@ -594,6 +599,29 @@ local function router_cfg(router, cfg, is_reload)
end
end
+--------------------------------------------------------------------------------
+-- Configuration wrapper
+--------------------------------------------------------------------------------
+
+local function cfg_wrapper(router, ...)
+ local enable_lock = not M.errinj.ERRINJ_MULTIPLE_CFG
+ if enable_lock then
+ router.cfg_lock:put(true)
+ end
+ if router.cfg_counter > 0 then
+ error('Error: cfg_counter > 0')
+ end
+ router.cfg_counter = router.cfg_counter + 1
+ local status, err = pcall(router_cfg, router, ...)
+ router.cfg_counter = router.cfg_counter - 1
+ if enable_lock then
+ router.cfg_lock:get()
+ end
+ if not status then
+ error(err)
+ end
+end
+
--------------------------------------------------------------------------------
-- Bootstrap
--------------------------------------------------------------------------------
@@ -862,7 +890,7 @@ end
local router_mt = {
__index = {
- cfg = function(router, cfg) return router_cfg(router, cfg, false) end,
+ cfg = function(router, cfg) return cfg_wrapper(router, cfg, false) end,
info = router_info;
buckets_info = router_buckets_info;
call = router_call;
@@ -920,6 +948,7 @@ local function router_new(name, cfg)
local router = table.deepcopy(ROUTER_TEMPLATE)
setmetatable(router, router_mt)
router.name = name
+ router.cfg_lock = lfiber.channel(1)
M.routers[name] = router
local ok, err = pcall(router_cfg, router, cfg)
if not ok then
@@ -936,7 +965,7 @@ end
local function legacy_cfg(cfg)
if M.static_router then
-- Reconfigure.
- router_cfg(M.static_router, cfg, false)
+ cfg_wrapper(M.static_router, cfg, false)
else
-- Create new static instance.
local router, err = router_new(STATIC_ROUTER_NAME, cfg)
@@ -961,7 +990,7 @@ if not rawget(_G, MODULE_INTERNALS) then
rawset(_G, MODULE_INTERNALS, M)
else
for _, router in pairs(M.routers) do
- router_cfg(router, router.current_cfg, true)
+ cfg_wrapper(router, router.current_cfg, true)
setmetatable(router, router_mt)
end
if M.static_router then
diff --git a/vshard/storage/init.lua b/vshard/storage/init.lua
index dc059ba..7deb67b 100644
--- a/vshard/storage/init.lua
+++ b/vshard/storage/init.lua
@@ -48,6 +48,10 @@ if not M then
---------------- Common module attributes ----------------
-- The last passed configuration.
current_cfg = nil,
+ -- Fiber channel as the locker to prevent multiple config.
+ cfg_lock = lfiber.channel(1),
+ -- Configuration counter to control and verify locker.
+ cfg_counter = 0,
--
-- All known replicasets used for bucket re-balancing.
-- See format in replicaset.lua.
@@ -66,6 +70,7 @@ if not M then
total_bucket_count = 0,
errinj = {
ERRINJ_CFG = false,
+ ERRINJ_MULTIPLE_CFG = false,
ERRINJ_BUCKET_FIND_GARBAGE_DELAY = false,
ERRINJ_RELOAD = false,
ERRINJ_CFG_DELAY = false,
@@ -1843,6 +1848,29 @@ local function storage_cfg(cfg,
this_replica_uuid, is_reload)
collectgarbage()
end
+--------------------------------------------------------------------------------
+-- Configuration wrapper
+--------------------------------------------------------------------------------
+
+local function storage_cfg_wrapper(...)
+ local enable_lock = not M.errinj.ERRINJ_MULTIPLE_CFG
+ if enable_lock then
+ M.cfg_lock:put(true)
+ end
+ if M.cfg_counter > 0 then
+ error('Error: cfg_counter > 0')
+ end
+ M.cfg_counter = M.cfg_counter + 1
+ local status, err = pcall(storage_cfg, ...)
+ M.cfg_counter = M.cfg_counter - 1
+ if enable_lock then
+ M.cfg_lock:get()
+ end
+ if not status then
+ error(err)
+ end
+end
+
--------------------------------------------------------------------------------
-- Monitoring
--------------------------------------------------------------------------------
@@ -2060,7 +2088,7 @@ if not rawget(_G, MODULE_INTERNALS) then
rawset(_G, MODULE_INTERNALS, M)
else
reload_evolution.upgrade(M)
- storage_cfg(M.current_cfg, M.this_replica.uuid, true)
+ storage_cfg_wrapper(M.current_cfg, M.this_replica.uuid, true)
M.module_version = M.module_version + 1
end
@@ -2103,7 +2131,7 @@ return {
rebalancing_is_in_progress = rebalancing_is_in_progress,
recovery_wakeup = recovery_wakeup,
call = storage_call,
- cfg = function(cfg, uuid) return storage_cfg(cfg, uuid, false) end,
+ cfg = function(cfg, uuid) return storage_cfg_wrapper(cfg, uuid, false) end,
info = storage_info,
buckets_info = storage_buckets_info,
buckets_count = storage_buckets_count,
--
2.17.1.windows.1
^ permalink raw reply [flat|nested] 5+ messages in thread* [tarantool-patches] [PATCH V3] Prohibit router/storage configuration from different fibers
@ 2018-08-31 14:55 Evgeniy Zaikin
0 siblings, 0 replies; 5+ messages in thread
From: Evgeniy Zaikin @ 2018-08-31 14:55 UTC (permalink / raw)
To: tarantool-patches
On Thu, 30 Aug 2018 at 03:56, Vladislav Shpilevoy
<v.shpilevoy@tarantool.org> wrote:
>
> Hi! Thanks for the fixes. See 9 comments below.
>
> 1. Please, put your fixes inlined right after my
> remarks in a response email. It is hard sometimes
> so track which of my remarks are not fixed without
> this.
>
OK, see my patch below in this email.
> 2. Write all your questions about a patch into
> tarantool-patches. I paste here your question
> from a private email:
>
> > Hi! I have a question about writing test module. The test should fail
> > if patch (or any part of this patch) is absent. But it is difficult to
> > make it possible without any architectural distortion (e.g. without
> > making nested function calls, without redundant constructions and code
> > injection, without any overkills in working code). There are no
> > questions If no test needed, but...
> > So which way is correct:
> > 1. to make one more nested (redundant) call in router/storage code;
> > 2. to inject additional counters in 'vshard.util' module, witch
> > contains implementation of my path ?
> > Current PATCH v2, witch was already sent, implements 2nd way (test
> > fails if M.lock:put(true) / M.lock:get() is absent or disabled).
> > https://www.freelists.org/post/tarantool-patches/PATCH-v2-Prohibit-routerstorage-configuration-from-different-fibers
> >
> > Thank you for reviewing my patch.
>
> Answer is the following: neither of those things. Use M.errinj
> table for such error injections, as I said in the previous review.
> Look at its current content and how is it used to make the similar
> test for concurrent cfgs. Or dig into errinj.h in Tarantool to
> find which of existing ones can be used.
>
Fixed. M.errinj.ERRINJ_MULTIPLE_CFG was introduced.
> On 21/08/2018 06:27, Евгений Заикин wrote:
> > Adds prohibition of simultaneous router/storage configuration from
> > multiple fibers.
> > Fixes: #140
> >
> > ---
> > Ticket:https://github.com/tarantool/vshard/issues/140
> > Branch:https://github.com/tarantool/vshard/tree/rave4life/gh-140-prohibit-multiple-cfg
> >
> > Changes in v2:
> > - separated test for router and storage
> > - locker wrapper function moved to vshard.utils
> > test/router/multi_fiber_cfg.result | 38 +++++++++++++++++++++++++
> > test/router/multi_fiber_cfg.test.lua | 12 ++++++++
> > test/storage/multi_fiber_cfg.result | 41 +++++++++++++++++++++++++++
> > test/storage/multi_fiber_cfg.test.lua | 13 +++++++++
> > vshard/router/init.lua | 6 ++--
> > vshard/storage/init.lua | 4 +--
> > vshard/util.lua | 17 +++++++++++
> > 7 files changed, 126 insertions(+), 5 deletions(-)
> > create mode 100644 test/router/multi_fiber_cfg.result
> > create mode 100644 test/router/multi_fiber_cfg.test.lua
> > create mode 100644 test/storage/multi_fiber_cfg.result
> > create mode 100644 test/storage/multi_fiber_cfg.test.lua
> >
> > diff --git a/test/router/multi_fiber_cfg.result
> > b/test/router/multi_fiber_cfg.result
> > new file mode 100644
> > index 0000000..42a4055
> > --- /dev/null
> > +++ b/test/router/multi_fiber_cfg.result
> > @@ -0,0 +1,38 @@
> > +test_run = require('test_run').new()
> > +---
> > +...
> > +cfg = require('localcfg')
> > +---
> > +...
> > +cfg.memtx_memory = nil
>
> 3. Why do you modify cfg?
> The same question for storage test.
>
See 'localcfg.lua': memtx_memory = 100 * 1024 * 1024.
Cause memtx_memory always set to larger size in previous tests, an error occured
while vshard.router/vshard.storage applies this config:
cannot decrease memory size at runtime.
Removed obvious nullifying by reinitialization 'cfg' entries on-a-fly.
Should I kill all instances (or full cluster clleanup) before this test?
Prefered not to do it making tests run as fast as possible.
> > +---
> > +...
> > +vshard = require('vshard')
>
> 4. As I said in the previous review, please,
> put this test into router/router.test.lua. It
> is not worth a separate file.
OK, fixed.
>
> The same remark for storage test.
>
> > +---
> > +...
> > +fiber = require('fiber')
> > +---
> > +...
> > +vshard.router.cfg(cfg)
> > +---
> > +...
> > +c = fiber.channel(2)
> > +---
> > +...
> > +f = function() fiber.create(function() local status, err =
> > pcall(vshard.router.cfg, cfg) c:put(status and true or false) end) end
> > +---
> > +...
> > +f()
> > +---
> > +...
> > +f()
> > +---
> > +...
> > +c:get()
> > +---
> > +- true
> > +...
> > +c:get()
> > +---
> > +- true
> > +...
> > diff --git a/vshard/router/init.lua b/vshard/router/init.lua
> > index 60ceafa..6b7a2c5 100644
> > --- a/vshard/router/init.lua
> > +++ b/vshard/router/init.lua
> > @@ -860,7 +860,7 @@ end
> >
> > local router_mt = {
> > __index = {
> > - cfg = function(router, cfg) return router_cfg(router, cfg, false) end,
> > + cfg = function(router, cfg) return
> > util.locker_func(router_cfg, router, cfg, false) end,
>
> 5. Out of 80 symbols per line.
Fixed.
>
> > info = router_info;
> > buckets_info = router_buckets_info;
> > call = router_call;
> > diff --git a/vshard/storage/init.lua b/vshard/storage/init.lua
> > index f9b8000..83f7343 100644
> > --- a/vshard/storage/init.lua
> > +++ b/vshard/storage/init.lua
> > @@ -1871,7 +1871,7 @@ if not rawget(_G, MODULE_INTERNALS) then
> > rawset(_G, MODULE_INTERNALS, M)
> > else
> > reload_evolution.upgrade(M)
> > - storage_cfg(M.current_cfg, M.this_replica.uuid, true)
> > + util.locker_func(storage_cfg, M.current_cfg, M.this_replica.uuid, true)
>
> 6. Do not use tabs in Lua files for indentation.
>
OK, tabs are replaced by spaces.
> > M.module_version = M.module_version + 1
> > end
> >
> > @@ -1908,7 +1908,7 @@ return {
> > rebalancing_is_in_progress = rebalancing_is_in_progress,
> > recovery_wakeup = recovery_wakeup,
> > call = storage_call,
> > - cfg = function(cfg, uuid) return storage_cfg(cfg, uuid, false) end,
> > + cfg = function(cfg, uuid) return util.locker_func(storage_cfg,
> > cfg, uuid, false) end,
>
> 7. Out of 80.
>
Fixed.
> > info = storage_info,
> > buckets_info = storage_buckets_info,
> > buckets_count = storage_buckets_count,
> > diff --git a/vshard/util.lua b/vshard/util.lua
> > index 3afaa61..d52598b 100644
> > --- a/vshard/util.lua
> > +++ b/vshard/util.lua
> > @@ -134,10 +136,25 @@ local function async_task(delay, task, ...)
> > fiber.create(sync_task, delay, task, ...)
> > end
> >
> > +local function locker_func(f, ...)
> > + M.lock:put(true)
> > + if M.cfg_counter > 0 then
> > + error('Error: cfg_counter > 0')
> > + end
> > + M.cfg_counter = M.cfg_counter + 1
> > + local status, err = pcall(f, ...)
> > + M.cfg_counter = M.cfg_counter - 1
> > + M.lock:get()
> > + if not status then
> > + error(err)
> > + end
> > +end
>
> 8. Since you started working on this patch, multiple
> routers per process feature was pushed, so M now can
> not be used in router for the counter and the lock.
> Please, rebase. Now each router should have its own
> non-global lock.
>
Rebased, moved again to router and storage. Latch implementation
now is different for router and storage, because multiple routers
was pushed.
> 9. Please, write a comment to this function like it
> is done for other ones.
>
OK, short comment is written. But since latch wrapper function is
local per lua file, there is no need to write full description.
> > +
> > return {
> > tuple_extract_key = tuple_extract_key,
> > reloadable_fiber_create = reloadable_fiber_create,
> > generate_self_checker = generate_self_checker,
> > async_task = async_task,
> > + locker_func = locker_func,
> > internal = M,
> > }
> >
Please find below the fixed patch.
===================================
From 5ce83d5db595455a14a58aedf9e6411f5adf1d7c Mon Sep 17 00:00:00 2001
From: rave4life <evgen4rave@gmail.com>
Date: Fri, 31 Aug 2018 16:41:11 +0300
Subject: [PATCH V3] Prohibit router/storage configuration from different fibers
Fixes: #140
---
Ticket:https://github.com/tarantool/vshard/issues/140
Branch:https://github.com/tarantool/vshard/tree/rave4life/gh-140-prohibit-multiple-cfg
Changes in v3:
- Separated test for router and storage (rebased to existing tests)
- Locker wrapper function moved back to router/init.lua and storage/init.lua
- Error injection added
- Tabs removed
---
test/router/router.result | 39 ++++++++++++++++++++++++++++++++
test/router/router.test.lua | 14 ++++++++++++
test/storage/storage.result | 42 +++++++++++++++++++++++++++++++++++
test/storage/storage.test.lua | 15 +++++++++++++
vshard/router/init.lua | 35 ++++++++++++++++++++++++++---
vshard/storage/init.lua | 32 ++++++++++++++++++++++++--
6 files changed, 172 insertions(+), 5 deletions(-)
diff --git a/test/router/router.result b/test/router/router.result
index 000307d..ada8309 100644
--- a/test/router/router.result
+++ b/test/router/router.result
@@ -1140,6 +1140,45 @@ test_run:drop_cluster(REPLICASET_2)
while test_run:grep_log('router_1', 'disconnected from ') == nil do
fiber.sleep(0.1) end
---
...
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = require('localcfg').sharding}
+---
+...
+vshard = require('vshard')
+---
+...
+fiber = require('fiber')
+---
+...
+vshard.router.cfg(cfg)
+---
+...
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
+c = fiber.channel(2)
+---
+...
+f = function() fiber.create(function() local status, err =
pcall(vshard.router.cfg, cfg) c:put(status and true or false) end) end
+---
+...
+f()
+---
+...
+f()
+---
+...
+c:get()
+---
+- true
+...
+c:get()
+---
+- true
+...
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
_ = test_run:cmd("stop server router_1")
---
...
diff --git a/test/router/router.test.lua b/test/router/router.test.lua
index 9f32d3e..fab476e 100644
--- a/test/router/router.test.lua
+++ b/test/router/router.test.lua
@@ -440,6 +440,20 @@ test_run:drop_cluster(REPLICASET_2)
-- gh-24: log all connnect/disconnect events.
while test_run:grep_log('router_1', 'disconnected from ') == nil do
fiber.sleep(0.1) end
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = require('localcfg').sharding}
+vshard = require('vshard')
+fiber = require('fiber')
+vshard.router.cfg(cfg)
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+c = fiber.channel(2)
+f = function() fiber.create(function() local status, err =
pcall(vshard.router.cfg, cfg) c:put(status and true or false) end) end
+f()
+f()
+c:get()
+c:get()
+vshard.router.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+
_ = test_run:cmd("stop server router_1")
_ = test_run:cmd("cleanup server router_1")
test_run:drop_cluster(REPLICASET_1)
diff --git a/test/storage/storage.result b/test/storage/storage.result
index e3e9e7f..0228445 100644
--- a/test/storage/storage.result
+++ b/test/storage/storage.result
@@ -688,6 +688,48 @@ rs:callro('echo', {'some_data'})
- null
- null
...
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = {}}
+---
+...
+cfg.sharding[box.info.cluster.uuid] = {replicas = {}}
+---
+...
+cfg.sharding[box.info.cluster.uuid].replicas[box.info.uuid] = {uri =
'storage:storage@127.0.0.1:3309', name = 'test_storage', master =
true}
+---
+...
+vshard = require('vshard')
+---
+...
+fiber = require('fiber')
+---
+...
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
+c = fiber.channel(2)
+---
+...
+f = function() fiber.create(function() local status, err =
pcall(vshard.storage.cfg, cfg, box.info.uuid) c:put(status and true or
false) end) end
+---
+...
+f()
+---
+...
+f()
+---
+...
+c:get()
+---
+- true
+...
+c:get()
+---
+- true
+...
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+---
+...
_ = test_run:switch("default")
---
...
diff --git a/test/storage/storage.test.lua b/test/storage/storage.test.lua
index c07730b..6ceaa52 100644
--- a/test/storage/storage.test.lua
+++ b/test/storage/storage.test.lua
@@ -182,6 +182,21 @@ util.has_same_fields(old_internal, vshard.storage.internal)
_, rs = next(vshard.storage.internal.replicasets)
rs:callro('echo', {'some_data'})
+-- gh-140: prohibit vshard.router/storage.cfg from multiple fibers.
+cfg = {sharding = {}}
+cfg.sharding[box.info.cluster.uuid] = {replicas = {}}
+cfg.sharding[box.info.cluster.uuid].replicas[box.info.uuid] = {uri =
'storage:storage@127.0.0.1:3309', name = 'test_storage', master =
true}
+vshard = require('vshard')
+fiber = require('fiber')
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+c = fiber.channel(2)
+f = function() fiber.create(function() local status, err =
pcall(vshard.storage.cfg, cfg, box.info.uuid) c:put(status and true or
false) end) end
+f()
+f()
+c:get()
+c:get()
+vshard.storage.internal.errinj.ERRINJ_MULTIPLE_CFG = false
+
_ = test_run:switch("default")
test_run:drop_cluster(REPLICASET_2)
test_run:drop_cluster(REPLICASET_1)
diff --git a/vshard/router/init.lua b/vshard/router/init.lua
index 7573801..446b1a0 100644
--- a/vshard/router/init.lua
+++ b/vshard/router/init.lua
@@ -28,6 +28,7 @@ if not M then
---------------- Common module attributes ----------------
errinj = {
ERRINJ_CFG = false,
+ ERRINJ_MULTIPLE_CFG = false,
ERRINJ_FAILOVER_CHANGE_CFG = false,
ERRINJ_RELOAD = false,
ERRINJ_LONG_DISCOVERY = false,
@@ -53,6 +54,10 @@ local ROUTER_TEMPLATE = {
name = nil,
-- The last passed configuration.
current_cfg = nil,
+ -- Fiber channel as the locker to prevent multiple config.
+ cfg_lock = nil,
+ -- Configuration counter to control and verify locker.
+ cfg_counter = 0,
-- Time to outdate old objects on reload.
connection_outdate_delay = nil,
-- Bucket map cache.
@@ -594,6 +599,29 @@ local function router_cfg(router, cfg, is_reload)
end
end
+--------------------------------------------------------------------------------
+-- Configuration wrapper
+--------------------------------------------------------------------------------
+
+local function cfg_wrapper(router, ...)
+ local enable_lock = not M.errinj.ERRINJ_MULTIPLE_CFG
+ if enable_lock then
+ router.cfg_lock:put(true)
+ end
+ if router.cfg_counter > 0 then
+ error('Error: cfg_counter > 0')
+ end
+ router.cfg_counter = router.cfg_counter + 1
+ local status, err = pcall(router_cfg, router, ...)
+ router.cfg_counter = router.cfg_counter - 1
+ if enable_lock then
+ router.cfg_lock:get()
+ end
+ if not status then
+ error(err)
+ end
+end
+
--------------------------------------------------------------------------------
-- Bootstrap
--------------------------------------------------------------------------------
@@ -862,7 +890,7 @@ end
local router_mt = {
__index = {
- cfg = function(router, cfg) return router_cfg(router, cfg, false) end,
+ cfg = function(router, cfg) return cfg_wrapper(router, cfg, false) end,
info = router_info;
buckets_info = router_buckets_info;
call = router_call;
@@ -920,6 +948,7 @@ local function router_new(name, cfg)
local router = table.deepcopy(ROUTER_TEMPLATE)
setmetatable(router, router_mt)
router.name = name
+ router.cfg_lock = lfiber.channel(1)
M.routers[name] = router
local ok, err = pcall(router_cfg, router, cfg)
if not ok then
@@ -936,7 +965,7 @@ end
local function legacy_cfg(cfg)
if M.static_router then
-- Reconfigure.
- router_cfg(M.static_router, cfg, false)
+ cfg_wrapper(M.static_router, cfg, false)
else
-- Create new static instance.
local router, err = router_new(STATIC_ROUTER_NAME, cfg)
@@ -961,7 +990,7 @@ if not rawget(_G, MODULE_INTERNALS) then
rawset(_G, MODULE_INTERNALS, M)
else
for _, router in pairs(M.routers) do
- router_cfg(router, router.current_cfg, true)
+ cfg_wrapper(router, router.current_cfg, true)
setmetatable(router, router_mt)
end
if M.static_router then
diff --git a/vshard/storage/init.lua b/vshard/storage/init.lua
index dc059ba..7deb67b 100644
--- a/vshard/storage/init.lua
+++ b/vshard/storage/init.lua
@@ -48,6 +48,10 @@ if not M then
---------------- Common module attributes ----------------
-- The last passed configuration.
current_cfg = nil,
+ -- Fiber channel as the locker to prevent multiple config.
+ cfg_lock = lfiber.channel(1),
+ -- Configuration counter to control and verify locker.
+ cfg_counter = 0,
--
-- All known replicasets used for bucket re-balancing.
-- See format in replicaset.lua.
@@ -66,6 +70,7 @@ if not M then
total_bucket_count = 0,
errinj = {
ERRINJ_CFG = false,
+ ERRINJ_MULTIPLE_CFG = false,
ERRINJ_BUCKET_FIND_GARBAGE_DELAY = false,
ERRINJ_RELOAD = false,
ERRINJ_CFG_DELAY = false,
@@ -1843,6 +1848,29 @@ local function storage_cfg(cfg,
this_replica_uuid, is_reload)
collectgarbage()
end
+--------------------------------------------------------------------------------
+-- Configuration wrapper
+--------------------------------------------------------------------------------
+
+local function storage_cfg_wrapper(...)
+ local enable_lock = not M.errinj.ERRINJ_MULTIPLE_CFG
+ if enable_lock then
+ M.cfg_lock:put(true)
+ end
+ if M.cfg_counter > 0 then
+ error('Error: cfg_counter > 0')
+ end
+ M.cfg_counter = M.cfg_counter + 1
+ local status, err = pcall(storage_cfg, ...)
+ M.cfg_counter = M.cfg_counter - 1
+ if enable_lock then
+ M.cfg_lock:get()
+ end
+ if not status then
+ error(err)
+ end
+end
+
--------------------------------------------------------------------------------
-- Monitoring
--------------------------------------------------------------------------------
@@ -2060,7 +2088,7 @@ if not rawget(_G, MODULE_INTERNALS) then
rawset(_G, MODULE_INTERNALS, M)
else
reload_evolution.upgrade(M)
- storage_cfg(M.current_cfg, M.this_replica.uuid, true)
+ storage_cfg_wrapper(M.current_cfg, M.this_replica.uuid, true)
M.module_version = M.module_version + 1
end
@@ -2103,7 +2131,7 @@ return {
rebalancing_is_in_progress = rebalancing_is_in_progress,
recovery_wakeup = recovery_wakeup,
call = storage_call,
- cfg = function(cfg, uuid) return storage_cfg(cfg, uuid, false) end,
+ cfg = function(cfg, uuid) return storage_cfg_wrapper(cfg, uuid, false) end,
info = storage_info,
buckets_info = storage_buckets_info,
buckets_count = storage_buckets_count,
--
2.17.1.windows.1
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-09-11 10:38 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-11 10:38 [tarantool-patches] [PATCH V3] Prohibit router/storage configuration from different fibers Evgeniy Zaikin
-- strict thread matches above, loose matches on Subject: below --
2018-09-11 10:32 Evgeniy Zaikin
2018-09-01 15:06 Evgeniy Zaikin
2018-09-01 12:17 Evgeniy Zaikin
2018-08-31 14:55 Evgeniy Zaikin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox