Tarantool development patches archive
 help / color / mirror / Atom feed
* [Tarantool-patches] [PATCH luajit] ARM64: Fix write barrier in BC_USETS.
@ 2021-07-07 14:36 Sergey Kaplun via Tarantool-patches
  2021-08-01 10:39 ` Igor Munkin via Tarantool-patches
  2021-08-11  7:22 ` Igor Munkin via Tarantool-patches
  0 siblings, 2 replies; 9+ messages in thread
From: Sergey Kaplun via Tarantool-patches @ 2021-07-07 14:36 UTC (permalink / raw)
  To: Igor Munkin, Sergey Ostanevich; +Cc: tarantool-patches

From: Mike Pall <mike>

Contributed by Javier Guerra Giraldez.

(cherry picked from commit c785131ca5a6d24adc519e5e0bf1b69b671d912f)

Closed upvalues are never gray. So after closed upvalue is marked, it is
marked as black. Black objects can't refer white objects, so for storing
a white value in closed upvalue, we need to move the barrier forward and
color our value to gray by using `lj_gc_barrieruv()`. This function
can't be called on closed upvalues with non-white values (at least there
is no need to mark it again).

USETS bytecode for arm64 architecture has the incorrect instruction to
check that upvalue is closed:
| ccmp TMP0w, #0, #0, ne
| beq <1 // branch out from barrier movement
`TMP0w` contains `upvalue->closed` field. If it equals NULL (the first
`#0`). The second zero is the value of NZCV condition flags set if the
condition (`ne`) is FALSE [1][2]. If the set value is not white, then
flags are set to zero and branch is not taken (no Zero flag). If it
happens at propagate or atomic GC State and the `lj_gc_barrieruv()`
function is called then the gray value to set is marked as white. That
leads to the assertion failure in the `gc_mark()` function.

This patch changes yielded NZCV condition flag to 4 (Zero flag is up) to
take the correct branch after `ccmp` instruction.

Sergey Kaplun:
* added the description and the test for the problem

[1]: https://developer.arm.com/documentation/dui0801/g/pge1427897656225
[2]: https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/condition-codes-1-condition-flags-and-codes
---

LuaJIT branch: https://github.com/tarantool/luajit/tree/skaplun/lj-426-incorrect-check-closed-uv
Tarantool branch: https://github.com/tarantool/tarantool/tree/skaplun/lj-426-incorrect-check-closed-uv

Assertion failure [1] is not related to the patch (I've reproduced it on
master branch). Looks like another one GC64 issue.

How to reproduce:
1) Run the following command from the Tarantool repo on Odroid:
| $ i=0; while [[ $? == 0 ]]; do i=$(($i+1)); echo $i; make LuaJIT-tests; done
2) Wait (need 4-15 iterations).

[1]: https://github.com/tarantool/tarantool/runs/3009273464#step:4:4013

Side note: Thanks to the Lord, that there is no #0 issue and it is not
mentioned that way...

 src/vm_arm64.dasc                             |  2 +-
 ...6-arm64-incorrect-check-closed-uv.test.lua | 38 +++++++++++++++++++
 2 files changed, 39 insertions(+), 1 deletion(-)
 create mode 100644 test/tarantool-tests/lj-426-arm64-incorrect-check-closed-uv.test.lua

diff --git a/src/vm_arm64.dasc b/src/vm_arm64.dasc
index 6e298255..ddcf0f11 100644
--- a/src/vm_arm64.dasc
+++ b/src/vm_arm64.dasc
@@ -2781,7 +2781,7 @@ static void build_ins(BuildCtx *ctx, BCOp op, int defop)
     |2:  // Check if string is white and ensure upvalue is closed.
     |  ldrb TMP0w, UPVAL:CARG1->closed
     |    tst TMP1w, #LJ_GC_WHITES	// iswhite(str)
-    |  ccmp TMP0w, #0, #0, ne
+    |  ccmp TMP0w, #0, #4, ne
     |  beq <1
     |  // Crossed a write barrier. Move the barrier forward.
     |  mov CARG1, GL
diff --git a/test/tarantool-tests/lj-426-arm64-incorrect-check-closed-uv.test.lua b/test/tarantool-tests/lj-426-arm64-incorrect-check-closed-uv.test.lua
new file mode 100644
index 00000000..b757133f
--- /dev/null
+++ b/test/tarantool-tests/lj-426-arm64-incorrect-check-closed-uv.test.lua
@@ -0,0 +1,38 @@
+local tap = require('tap')
+
+local test = tap.test('lj-426-arm64-incorrect-check-closed-uv')
+test:plan(1)
+
+-- Test file to demonstrate LuaJIT USETS bytecode incorrect
+-- behaviour on arm64 in case when non-white object is set to
+-- closed upvalue.
+-- See also, https://github.com/LuaJIT/LuaJIT/issues/426.
+
+-- First, create a closed upvalue.
+do
+  local uv -- luacheck: no unused
+  -- The function's prototype is created with the following
+  -- constants at chunk parsing. After adding this constant to
+  -- the function's prototype it will be marked as gray during
+  -- propogate phase.
+  local function usets() uv = '' end
+  _G.usets = usets
+end
+
+-- Set GC state to GCpause.
+collectgarbage()
+-- Do GC step as often as possible.
+collectgarbage('setstepmul', 100)
+
+-- We don't know on what exactly step our upvalue is marked as
+-- black and USETS become dangerous, so just check it at each
+-- step.
+-- Don't need to do the full GC cycle step by step.
+local old_steps_atomic = misc.getmetrics().gc_steps_atomic
+while (misc.getmetrics().gc_steps_atomic == old_steps_atomic) do
+  collectgarbage('step')
+  usets() -- luacheck: no global
+end
+
+test:ok(true)
+os.exit(test:check() and 0 or 1)
-- 
2.31.0


^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2021-08-11  7:46 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-07 14:36 [Tarantool-patches] [PATCH luajit] ARM64: Fix write barrier in BC_USETS Sergey Kaplun via Tarantool-patches
2021-08-01 10:39 ` Igor Munkin via Tarantool-patches
2021-08-01 17:00   ` Sergey Kaplun via Tarantool-patches
2021-08-08 19:28     ` Igor Munkin via Tarantool-patches
2021-08-09 16:01       ` Sergey Kaplun via Tarantool-patches
2021-08-09 19:46         ` Igor Munkin via Tarantool-patches
2021-08-10 16:40         ` Sergey Ostanevich via Tarantool-patches
2021-08-11  5:57           ` Vitaliia Ioffe via Tarantool-patches
2021-08-11  7:22 ` Igor Munkin via Tarantool-patches

Tarantool development patches archive

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://lists.tarantool.org/tarantool-patches/0 tarantool-patches/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 tarantool-patches tarantool-patches/ https://lists.tarantool.org/tarantool-patches \
		tarantool-patches@dev.tarantool.org.
	public-inbox-index tarantool-patches

Example config snippet for mirrors.


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git