[Tarantool-patches] [PATCH luajit 6/6] cmake: replace prove with CTest

[Sergey Bronnikov via Tarantool-patches <tarantool-patches@dev.tarantool.org>]

From: Sergey Bronnikov <sergeyb@tarantool.org>

The patch replaces the main test runner `prove(1)` with CTest,
see [1] and [2].

Build and test steps looks the same as before:

$ cmake -S . -B build
$ cmake --build build --parallel
$ cmake --build build --target [LuaJIT-test, test]

CMake targets lua-Harness-tests, LuaJIT-tests,
PUC-Rio-Lua-5.1-tests, tarantool-tests and tarantool-c-tests
are still operating.

CMake custom target `test` was replaced by a target with the same
name that is automatically generated by CMake. It is not possible
to attach targets to this automatically generated `test` target.
It means that target `test` is now executing `LuaJIT-test`,
but not `LuaJIT-lint`. To mitigate this a new target
`LuaJIT-check-all` is introduced, it has the same behaviour like
an old `test` target: it runs all functional tests and linters.

One could use `ctest` tool:

$ ctest --print-labels
Test project <snipped>
All Labels:
  LuaJIT-tests
  PUC-Rio-Lua-5.1-tests
  lua-Harness-tests
  tarantool-c-tests
  tarantool-tests
$ ctest                          # Run all tests.
$ ctest -L tarantool-tests       # Run tests by label.
$ ctest -L tarantool-c-tests     # Ditto.
$ ctest -L lua-Harness-tests     # Ditto.
$ ctest -L LuaJIT-tests          # Ditto.
$ ctest -L PUC-Rio-Lua-5.1-tests # Ditto.
$ ctest --rerun-fail             # Run only the tests
                                 # that failed previously.
$ ctest --verbose                # Print details to stdout.
$ ctest --output-on-failure      # Print details to stdout
                                 # on test failure only.

The benefits are:

- less external dependencies, `prove(1)` is gone, `ctest`
  is a part of CMake
- running tests by test title
- extended test running options in comparison to prove(1)
- unified test output (finally!)

Note that the testsuites in `test/LuaJIT-tests` and
`test/PUC-Rio-Lua-5.1` directories have their own test runners
written in Lua, and currently CTest runs these testsuites
as single tests. In the future, we could change these test runners
to specify tests from outside, and after this, we could run tests
separately by CTest in these test suites.

Note that it is not possible to add dependencies to `add_test()`
in CMake, see [3]. CMake 3.7 introduces FIXTURES_REQUIRED [4] and
FIXTURES_SETUP [5], but these test properties cannot be used -
used CMake version is lower. This is workarounded by an introduced
macro `add_test_suite_target` that adds a CMake-test for each
testsuite that executes a target that builds test dependencies.

The commit introduce a CMake option LUAJIT_TEST_DEPS that set
dependencies to be used for running and building LuaJIT tests.

1. https://cmake.org/cmake/help/latest/manual/ctest.1.html
2. https://cmake.org/cmake/help/book/mastering-cmake/chapter/Testing%20With%20CMake%20and%20CTest.html
3. https://gitlab.kitware.com/cmake/cmake/-/issues/8774
4. https://cmake.org/cmake/help/latest/prop_test/FIXTURES_REQUIRED.html
5. https://cmake.org/cmake/help/latest/prop_test/FIXTURES_SETUP.html
---
 .gitignore                                |   2 +
 CMakeLists.txt                            |  14 +++
 test/CMakeLists.txt                       | 107 +++++++++++++++++-----
 test/LuaJIT-tests/CMakeLists.txt          |  33 ++++---
 test/PUC-Rio-Lua-5.1-tests/CMakeLists.txt |  25 +++--
 test/lua-Harness-tests/CMakeLists.txt     |  50 +++++-----
 test/tarantool-c-tests/CMakeLists.txt     |  58 ++++++------
 test/tarantool-tests/CMakeLists.txt       |  68 +++++++-------
 8 files changed, 226 insertions(+), 131 deletions(-)

diff --git a/.gitignore b/.gitignore
index dc5ea5fc..dd1f8888 100644
--- a/.gitignore
+++ b/.gitignore
@@ -15,7 +15,9 @@
 .ninja_log
 CMakeCache.txt
 CMakeFiles
+CTestTestfile.cmake
 Makefile
+Testing
 build.ninja
 cmake_install.cmake
 cmake_uninstall.cmake
diff --git a/CMakeLists.txt b/CMakeLists.txt
index 7f5e2afb..96f85285 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -345,6 +345,13 @@ set(LUAJIT_TEST_BINARY ${LUAJIT_BINARY} CACHE STRING
   "Lua implementation to be used for tests. Default is 'luajit'."
 )
 
+# If LuaJIT is used in a parent project, provide an option
+# to choose what dependencies to be used for running and building
+# LuaJIT tests.
+set(LUAJIT_TEST_DEPS "luajit-main" CACHE STRING
+  "A list of target dependencies to be used for tests."
+)
+
 # FIXME: If LuaJIT is used in parent project, provide an option
 # to pass Lua code to be run before tests are started.
 # XXX: Attentive reader might point to LUA_INIT environment
@@ -362,6 +369,13 @@ set(LUAJIT_TEST_INIT "${PROJECT_SOURCE_DIR}/test/luajit-test-init.lua" CACHE STR
   "Lua code need to be run before tests are started."
 )
 
+# XXX: Enable testing via CTest. This automatically generates
+# the `test` target. Since CTest expects to find a test file in
+# the build directory root, this command should be in the source
+# directory root (hence, in this CMakeLists.txt).
+if (LUAJIT_USE_TEST)
+  enable_testing()
+endif()
 add_subdirectory(test)
 
 # --- Misc rules ---------------------------------------------------------------
diff --git a/test/CMakeLists.txt b/test/CMakeLists.txt
index 62478441..06a1d365 100644
--- a/test/CMakeLists.txt
+++ b/test/CMakeLists.txt
@@ -78,35 +78,94 @@ set(CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake")
 include(AddTestLib)
 include(LibRealPath)
 
+# CTEST_FLAGS is used by CMake targets in test suites.
+# XXX: CMake 3.17 introduces CMAKE_CTEST_ARGUMENTS that contains
+# CTest options and is used by `test` target.
+set(CTEST_FLAGS
+  --output-on-failure
+  --schedule-random
+  # Timeout in seconds. Most of LuaJIT tests are fast,
+  # however, some tests can hang or execute infinite loop.
+  # See <tarantool-c-tests/gh-8594-sysprof-ffunc-crash.test.c>,
+  # commit caa99865c206 ("test: rewrite sysprof test using managed execution").
+  # Moreover, tests for instrumented LuaJIT requires more time.
+  # 30 minutes is a sane timeout.
+  --timeout 1800
+  --parallel ${CMAKE_BUILD_PARALLEL_LEVEL}
+)
+if(CMAKE_VERBOSE_MAKEFILE)
+  list(APPEND CTEST_FLAGS --verbose)
+endif()
+
+# It is not possible to add dependencies to `add_test()`
+# in CMake, see [1]. CMake 3.7 introduces FIXTURES_REQUIRED [2]
+# and FIXTURES_SETUP [3], but these test properties cannot be
+# used - it is unsupported in a current CMake version.
+# To workaround this a function `add_test_suite_target` is
+# introduced, it adds a CMake target that builds testsuite's
+# prerequisites and CMake test that executes that target.
+#
+# 1. https://gitlab.kitware.com/cmake/cmake/-/issues/8774
+# 2. https://cmake.org/cmake/help/latest/prop_test/FIXTURES_REQUIRED.html
+# 3. https://cmake.org/cmake/help/latest/prop_test/FIXTURES_SETUP.html
+function(add_test_suite_target target)
+  set(prefix ARG)
+  set(noValues)
+  set(singleValues LABELS)
+  set(multiValues DEPENDS)
+
+  # FIXME: if we update to CMake >= 3.5, can remove this line.
+  include(CMakeParseArguments)
+  cmake_parse_arguments(${prefix}
+                        "${noValues}"
+                        "${singleValues}"
+                        "${multiValues}"
+                        ${ARGN})
+
+  set(_DEPS_TARGET ${target}-deps)
+
+  add_custom_target(${_DEPS_TARGET} DEPENDS ${ARG_DEPENDS})
+
+  add_test(NAME ${_DEPS_TARGET}
+    COMMAND ${CMAKE_COMMAND}
+            --build ${CMAKE_BINARY_DIR}
+            --target ${_DEPS_TARGET}
+  )
+  set_tests_properties(${_DEPS_TARGET} PROPERTIES
+    LABELS ${ARG_LABELS}
+  )
+
+  message(STATUS "Add test suite ${ARG_LABELS}")
+
+  add_custom_target(${target}
+    COMMAND ${CMAKE_CTEST_COMMAND} -L ${ARG_LABELS} ${CTEST_FLAGS}
+    DEPENDS ${_DEPS_TARGET}
+  )
+endfunction()
+
 add_subdirectory(LuaJIT-tests)
 add_subdirectory(PUC-Rio-Lua-5.1-tests)
 add_subdirectory(lua-Harness-tests)
 add_subdirectory(tarantool-c-tests)
 add_subdirectory(tarantool-tests)
 
-add_custom_target(${PROJECT_NAME}-test DEPENDS
-  LuaJIT-tests
-  PUC-Rio-Lua-5.1-tests
-  lua-Harness-tests
-  tarantool-c-tests
-  tarantool-tests
+# Each testsuite has it's own CMake target, but combining these
+# target to a single one is not desired, because each target
+# runs it's own ctest command, that each time enumerates tests
+# from zero and prints test summary at the end of test run.
+# For common target this output looks inconvenient.
+# Therefore target below executes a single instance of ctest
+# command that runs all generated CMake tests.
+add_custom_target(${PROJECT_NAME}-test
+  COMMAND ${CMAKE_CTEST_COMMAND} ${CTEST_FLAGS}
+  DEPENDS tarantool-c-tests-deps
+          tarantool-tests-deps
+          lua-Harness-tests-deps
+          PUC-Rio-Lua-5.1-tests-deps
+          LuaJIT-tests-deps
 )
 
-if(LUAJIT_USE_TEST)
-  if(POLICY CMP0037)
-    if(CMAKE_VERSION VERSION_LESS 3.11)
-      # CMake below 3.11 reserves the name 'test'. Use old policy.
-      # https://cmake.org/cmake/help/v3.11/release/3.11.html#other-changes
-      cmake_policy(SET CMP0037 OLD)
-    else()
-      # Starting from CMake 3.11 the name 'test' is reserved in
-      # special cases and can be used as a target name.
-      cmake_policy(SET CMP0037 NEW)
-    endif()
-  endif(POLICY CMP0037)
-
-  add_custom_target(test DEPENDS
-    ${PROJECT_NAME}-test
-    ${PROJECT_NAME}-lint
-  )
-endif()
+add_custom_target(${PROJECT_NAME}-check-all
+  DEPENDS ${PROJECT_NAME}-test
+          ${PROJECT_NAME}-lint
+)
diff --git a/test/LuaJIT-tests/CMakeLists.txt b/test/LuaJIT-tests/CMakeLists.txt
index 003f8de6..6ad05aa6 100644
--- a/test/LuaJIT-tests/CMakeLists.txt
+++ b/test/LuaJIT-tests/CMakeLists.txt
@@ -3,17 +3,13 @@ cmake_minimum_required(VERSION 3.1 FATAL_ERROR)
 
 add_subdirectory(src)
 
-add_custom_target(LuaJIT-tests
-  DEPENDS ${LUAJIT_TEST_BINARY} LuaJIT-tests-libs
-)
-
 make_lua_path(LUA_CPATH
   PATHS
   ${CMAKE_CURRENT_BINARY_DIR}/src/?${CMAKE_SHARED_LIBRARY_SUFFIX}
 )
 
 set(LUAJIT_TESTS_ENV
-  "LUA_CPATH=\"${LUA_CPATH}\""
+  "LUA_CPATH=${LUA_CPATH}"
 )
 
 set(LD_LIBRARY_PATH "${CMAKE_CURRENT_BINARY_DIR}/src/:")
@@ -56,12 +52,25 @@ if(LUAJIT_NO_UNWIND)
   set(LUAJIT_TEST_TAGS_EXTRA +internal_unwinder)
 endif()
 
-add_custom_command(TARGET LuaJIT-tests
-  COMMENT "Running LuaJIT-tests"
-  COMMAND
-    env
-      ${LUAJIT_TESTS_ENV}
-      ${LUAJIT_TEST_COMMAND} ${CMAKE_CURRENT_SOURCE_DIR}/test.lua
-      +slow +ffi +bit +jit ${LUAJIT_TEST_TAGS_EXTRA}
+set(TEST_SUITE_NAME "LuaJIT-tests")
+
+# XXX: The call produces both test and target <LuaJIT-tests-deps>
+# as a side effect.
+add_test_suite_target(LuaJIT-tests
+  LABELS ${TEST_SUITE_NAME}
+  DEPENDS ${LUAJIT_TEST_DEPS} LuaJIT-tests-libs
+)
+
+# The test suite has its own test runner
+# (test/LuaJIT-tests/test.lua), it is not possible to run these
+# tests one-by-one by CTest.
+add_test(NAME "test/LuaJIT-tests"
+  COMMAND ${LUAJIT_TEST_COMMAND} ${CMAKE_CURRENT_SOURCE_DIR}/test.lua
+                                 +slow +ffi +bit +jit ${LUAJIT_TEST_TAGS_EXTRA}
   WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
 )
+set_tests_properties("test/LuaJIT-tests" PROPERTIES
+  LABELS ${TEST_SUITE_NAME}
+  ENVIRONMENT "${LUAJIT_TESTS_ENV}"
+  DEPENDS LuaJIT-tests-deps
+)
diff --git a/test/PUC-Rio-Lua-5.1-tests/CMakeLists.txt b/test/PUC-Rio-Lua-5.1-tests/CMakeLists.txt
index 98277f9a..a26e38d4 100644
--- a/test/PUC-Rio-Lua-5.1-tests/CMakeLists.txt
+++ b/test/PUC-Rio-Lua-5.1-tests/CMakeLists.txt
@@ -34,17 +34,26 @@ add_subdirectory(libs)
 # But, unfortunately, <ltests.c> depends on specific PUC-Rio
 # Lua 5.1 internal headers and should be adapted for LuaJIT.
 
-add_custom_target(PUC-Rio-Lua-5.1-tests
-  DEPENDS ${LUAJIT_TEST_BINARY} PUC-Rio-Lua-5.1-tests-prepare
+set(TEST_SUITE_NAME "PUC-Rio-Lua-5.1-tests")
+
+# XXX: The call produces both test and target
+# <PUC-Rio-Lua-5.1-tests-deps> as a side effect.
+add_test_suite_target(PUC-Rio-Lua-5.1-tests
+  LABELS ${TEST_SUITE_NAME}
+  DEPENDS ${LUAJIT_TEST_DEPS} PUC-Rio-Lua-5.1-tests-prepare
 )
 
-add_custom_command(TARGET PUC-Rio-Lua-5.1-tests
-  COMMENT "Running PUC-Rio Lua 5.1 tests"
-  COMMAND
-  env
-    LUA_PATH="${LUA_PATH}"
-    ${LUAJIT_TEST_COMMAND} ${CMAKE_CURRENT_SOURCE_DIR}/all.lua
+# The test suite has its own test runner
+# (test/PUC-Rio-Lua-5.1-tests/all.lua), it is not possible
+# to run these tests one-by-one by CTest.
+add_test(NAME "test/PUC-Rio-Lua-5.1-tests"
+  COMMAND ${LUAJIT_TEST_COMMAND} ${CMAKE_CURRENT_SOURCE_DIR}/all.lua
   WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
 )
+set_tests_properties("test/PUC-Rio-Lua-5.1-tests" PROPERTIES
+  ENVIRONMENT "LUA_PATH=${LUA_PATH}"
+  LABELS ${TEST_SUITE_NAME}
+  DEPENDS PUC-Rio-Lua-5.1-tests-deps
+)
 
 # vim: expandtab tabstop=2 shiftwidth=2
diff --git a/test/lua-Harness-tests/CMakeLists.txt b/test/lua-Harness-tests/CMakeLists.txt
index f748a8fd..6f7b5697 100644
--- a/test/lua-Harness-tests/CMakeLists.txt
+++ b/test/lua-Harness-tests/CMakeLists.txt
@@ -4,12 +4,6 @@
 # See the rationale in the root CMakeLists.txt
 cmake_minimum_required(VERSION 3.1 FATAL_ERROR)
 
-find_program(PROVE prove)
-if(NOT PROVE)
-  message(WARNING "`prove' is not found, so lua-Harness-tests target is not generated")
-  return()
-endif()
-
 # Tests create temporary files (see 303-package.t and 411-luajit.t
 # for example) to be required. Also, they require some files from
 # the original test source directory.
@@ -20,23 +14,37 @@ make_lua_path(LUA_PATH
     ${LUAJIT_SOURCE_DIR}/?.lua
     ${LUAJIT_BINARY_DIR}/?.lua
 )
-set(LUA_TEST_FLAGS --failures --shuffle)
 
-if(CMAKE_VERBOSE_MAKEFILE)
-  list(APPEND LUA_TEST_FLAGS --verbose)
-endif()
+set(TEST_SUITE_NAME "lua-Harness-tests")
 
-add_custom_target(lua-Harness-tests DEPENDS ${LUAJIT_TEST_BINARY})
-add_custom_command(TARGET lua-Harness-tests
-  COMMENT "Running lua-Harness tests"
-  COMMAND
-  env
-    LUA_PATH="${LUA_PATH}"
-    ${PROVE} ${CMAKE_CURRENT_SOURCE_DIR}
-      --exec '${LUAJIT_TEST_COMMAND} -l profile_luajit21'
-      --jobs ${CMAKE_BUILD_PARALLEL_LEVEL}
-      ${LUA_TEST_FLAGS}
-  WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
+# XXX: The call produces both test and target
+# <lua-Harness-tests-deps> as a side effect.
+add_test_suite_target(lua-Harness-tests
+  LABELS ${TEST_SUITE_NAME}
+  DEPENDS ${LUAJIT_TEST_DEPS}
 )
 
+set(LUA_TEST_SUFFIX .t)
+
+file(GLOB tests ${CMAKE_CURRENT_SOURCE_DIR} "*${LUA_TEST_SUFFIX}")
+foreach(test_path ${tests})
+  get_filename_component(test_name ${test_path} NAME)
+  # FIXME: By default, GLOB lists directories.
+  # Directories are omitted in the result if LIST_DIRECTORIES
+  # is set to false. New in version CMake 3.3.
+  if (${test_name} STREQUAL ${TEST_SUITE_NAME})
+    continue()
+  endif()
+  set(test_title "test/${TEST_SUITE_NAME}/${test_name}")
+  add_test(NAME ${test_title}
+    COMMAND ${LUAJIT_TEST_COMMAND} -l profile_luajit21 ${test_path}
+    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
+  )
+  set_tests_properties(${test_title} PROPERTIES
+    ENVIRONMENT "LUA_PATH=${LUA_PATH}"
+    LABELS ${TEST_SUITE_NAME}
+    DEPENDS lua-Harness-tests-deps
+  )
+endforeach()
+
 # vim: expandtab tabstop=2 shiftwidth=2
diff --git a/test/tarantool-c-tests/CMakeLists.txt b/test/tarantool-c-tests/CMakeLists.txt
index 4b1d8832..5affbb9e 100644
--- a/test/tarantool-c-tests/CMakeLists.txt
+++ b/test/tarantool-c-tests/CMakeLists.txt
@@ -1,15 +1,4 @@
-find_program(PROVE prove)
-if(NOT PROVE)
-  message(WARNING "`prove' is not found, so tarantool-c-tests target is not generated")
-  return()
-endif()
-
 set(C_TEST_SUFFIX .c_test)
-set(C_TEST_FLAGS --failures --shuffle)
-
-if(CMAKE_VERBOSE_MAKEFILE)
-  list(APPEND C_TEST_FLAGS --verbose)
-endif()
 
 # Build libtest.
 
@@ -30,6 +19,23 @@ AppendFlags(TESTS_C_FLAGS ${TARGET_C_FLAGS})
 # test binary can be run from any directory.
 AppendFlags(TESTS_C_FLAGS "-D__LJ_TEST_DIR__='\"${CMAKE_CURRENT_SOURCE_DIR}\"'")
 
+set(TEST_SUITE_NAME "tarantool-c-tests")
+
+# Proxy CMake target with all targets that builds C tests.
+# This is needed because targets for each C test are generated
+# at the same time with CMake tests, and all prerequisites must be
+# already exist at this moment.
+add_custom_target(tarantool-c-tests-build)
+
+# XXX: The call produces both test and target
+# <tarantool-c-tests-deps> as a side effect.
+add_test_suite_target(tarantool-c-tests
+  LABELS ${TEST_SUITE_NAME}
+  # XXX: LUAJIT_TEST_DEPS is not needed, we know dependencies
+  # in advance.
+  DEPENDS libluajit libtest tarantool-c-tests-build
+)
+
 set(CTEST_SRC_SUFFIX ".test.c")
 file(GLOB tests "${CMAKE_CURRENT_SOURCE_DIR}/*${CTEST_SRC_SUFFIX}")
 foreach(test_source ${tests})
@@ -47,22 +53,16 @@ foreach(test_source ${tests})
   )
   target_link_libraries(${exe} libtest ${LUAJIT_LIBRARY})
   LIST(APPEND TESTS_COMPILED ${exe})
-endforeach()
+  add_dependencies(tarantool-c-tests-build ${exe})
 
-add_custom_target(tarantool-c-tests
-  DEPENDS libluajit libtest ${TESTS_COMPILED}
-)
-
-add_custom_command(TARGET tarantool-c-tests
-  COMMENT "Running Tarantool C tests"
-  COMMAND
-  ${PROVE}
-    ${CMAKE_CURRENT_BINARY_DIR}
-    --ext ${C_TEST_SUFFIX}
-    --jobs ${CMAKE_BUILD_PARALLEL_LEVEL}
-    # Report any TAP parse errors, if any, since test module is
-    # maintained by us.
-    --parse
-    ${C_TEST_FLAGS}
-  WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
-)
+  # Generate CMake tests.
+  set(test_title "test/${TEST_SUITE_NAME}/${exe}${C_TEST_SUFFIX}")
+  add_test(NAME ${test_title}
+    COMMAND ${CMAKE_CURRENT_BINARY_DIR}/${exe}${C_TEST_SUFFIX}
+    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
+  )
+  set_tests_properties(${test_title} PROPERTIES
+    LABELS ${TEST_SUITE_NAME}
+    DEPENDS tarantool-c-tests-deps
+  )
+endforeach()
diff --git a/test/tarantool-tests/CMakeLists.txt b/test/tarantool-tests/CMakeLists.txt
index 35bcc5ef..9086a890 100644
--- a/test/tarantool-tests/CMakeLists.txt
+++ b/test/tarantool-tests/CMakeLists.txt
@@ -4,19 +4,13 @@
 # See the rationale in the root CMakeLists.txt.
 cmake_minimum_required(VERSION 3.1 FATAL_ERROR)
 
-find_program(PROVE prove)
-if(NOT PROVE)
-  message(WARNING "`prove' is not found, so tarantool-tests target is not generated")
-  return()
-endif()
-
-add_custom_target(tarantool-tests
+add_custom_target(tarantool-tests-libs
   DEPENDS ${LUAJIT_TEST_BINARY}
 )
 
 macro(BuildTestCLib lib sources)
   AddTestLib(${lib} ${sources})
-  add_dependencies(tarantool-tests ${lib})
+  add_dependencies(tarantool-tests-libs ${lib})
   # Add the directory where the lib is built to the list with
   # entries for LUA_CPATH environment variable, so LuaJIT can find
   # and load it. See the comment about extending the list in the
@@ -61,20 +55,12 @@ make_lua_path(LUA_PATH
     ${LUAJIT_SOURCE_DIR}/?.lua
     ${LUAJIT_BINARY_DIR}/?.lua
 )
+
 # Update LUA_CPATH with the library paths collected within
 # <BuildTestLib> macro.
 make_lua_path(LUA_CPATH PATHS ${LUA_CPATHS})
 
 set(LUA_TEST_SUFFIX .test.lua)
-set(LUA_TEST_FLAGS --failures --shuffle)
-set(LUA_TEST_ENV
-  "LUA_PATH=\"${LUA_PATH}\""
-  "LUA_CPATH=\"${LUA_CPATH}\""
-)
-
-if(CMAKE_VERBOSE_MAKEFILE)
-  list(APPEND LUA_TEST_FLAGS --verbose)
-endif()
 
 # XXX: Since the auxiliary libraries are built as a dynamically
 # loaded modules on MacOS instead of shared libraries as it is
@@ -118,29 +104,37 @@ endif()
 # process.
 # See also: https://github.com/tarantool/tarantool/issues/9656.
 if(LUAJIT_USE_ASAN AND CMAKE_C_COMPILER_ID STREQUAL "GNU")
-  # FIXME: After using CTest instead of `prove` we should set this
-  # environment variable only for the corresponding tests to avoid
-  # warnings from the libc and etc.
+  # FIXME: test_title test/tarantool-tests/lj-802-panic-at-mcode-protfail.test.lua
+  # With CTest we should set this environment variable only
+  # for the corresponding tests to avoid warnings from
+  # the GNU libc and other libc implementations.
   LibRealPath(LIB_ASAN libasan.so)
   list(APPEND LUA_TEST_ENV_MORE LD_PRELOAD=${LIB_ASAN})
 endif()
 
-# LUA_CPATH and LD_LIBRARY_PATH variables and also dependencies
-# list with libraries are set in scope of BuildTestLib macro.
-add_custom_command(TARGET tarantool-tests
-  COMMENT "Running Tarantool tests"
-  COMMAND
-  # XXX: We can't move everything to the "inner" env, since there
-  # are some issues with escaping ';' for different shells. As
-  # a result LUA_PATH/LUA_CPATH variables are set via the "outer"
-  # env, since they are not stripped by SIP like LD_*/DYLD_* are.
-  env
-    ${LUA_TEST_ENV}
-    ${PROVE} ${CMAKE_CURRENT_SOURCE_DIR}
-      --exec 'env ${LUA_TEST_ENV_MORE} ${LUAJIT_TEST_COMMAND}'
-      --ext ${LUA_TEST_SUFFIX}
-      --jobs ${CMAKE_BUILD_PARALLEL_LEVEL}
-      ${LUA_TEST_FLAGS}
-  WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
+set(TEST_SUITE_NAME "tarantool-tests")
+
+# XXX: The call produces both test and target
+# <tarantool-tests-deps> as a side effect.
+add_test_suite_target(tarantool-tests
+  LABELS ${TEST_SUITE_NAME}
+  DEPENDS ${LUAJIT_TEST_DEPS} tarantool-tests-libs
 )
 
+# LUA_CPATH and LD_LIBRARY_PATH variables and also TESTLIBS list
+# with dependencies are set in scope of BuildTestLib macro.
+set(TEST_ENV "LUA_PATH=${LUA_PATH};LUA_CPATH=${LUA_CPATH};${LUA_TEST_ENV_MORE}")
+file(GLOB_RECURSE tests ${CMAKE_CURRENT_SOURCE_DIR} "*${LUA_TEST_SUFFIX}")
+foreach(test_path ${tests})
+  get_filename_component(test_name ${test_path} NAME)
+  set(test_title "test/tarantool-tests/${test_name}")
+  add_test(NAME ${test_title}
+    COMMAND ${LUAJIT_TEST_COMMAND} ${test_path}
+    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
+  )
+  set_tests_properties(${test_title} PROPERTIES
+    ENVIRONMENT "${TEST_ENV}"
+    LABELS ${TEST_SUITE_NAME}
+    DEPENDS tarantool-tests-deps
+  )
+endforeach()
-- 
2.34.1