[Tarantool-patches] [PATCH v5 1/3] gc/xlog: delay xlog cleanup until relays are subscribed

Cyrill Gorcunov gorcunov at gmail.com
Fri Mar 26 15:06:03 MSK 2021


In case if replica managed to be far behind the master node
(so there are a number of xlog files present after the last
master's snapshot) then once master node get restarted it
may clean up the xlogs needed by the replica to subscribe
in a fast way and instead the replica will have to rejoin
reading a number of data back.

Lets try to address this by delaying xlog files cleanup
until replicas are got subscribed and relays are up
and running. For this sake we start with cleanup fiber
spinning in nop cycle ("paused" mode) and use a delay
counter to wait until relays decrement them.

This implies that if `_cluster` system space is not empty
upon restart and the registered replica somehow vanished
completely and won't ever come back, then the node
administrator has to drop this replica from `_cluster`
manually.

Note that this delayed cleanup start doesn't prevent
WAL engine from removing old files if there is no
space left on a storage device. The WAL will simply
drop old data without a question.

We need to take into account that some administrators
might not need this functionality at all, for this
sake we introduce "wal_cleanup_delay" configuration
option which allows to enable or disable the delay.

Closes #5806

Signed-off-by: Cyrill Gorcunov <gorcunov at gmail.com>

@TarantoolBot document
Title: Add wal_cleanup_delay configuration parameter

The `wal_cleanup_delay` option defines a delay in seconds
before write ahead log files (`*.xlog`) are getting started
to prune upon a node restart.

This option is ignored in case if a node is running as
an anonymous replica (`replication_anon = true`). Similarly
if replication is unused or there is no plans to use
replication at all then this option should not be considered.

An initial problem to solve is the case where a node is operating
so fast that its replicas do not manage to reach the node state
and in case if the node is restarted at this moment (for various
reasons, for example due to power outage) then `*.xlog` files might
be pruned during restart. In result replicas will not find these
files on the main node and have to reread all data back which
is a very expensive procedure.

Since replicas are tracked via `_cluster` system space this we use
its content to count subscribed replicas and when all of them are
up and running the cleanup procedure is automatically enabled even
if `wal_cleanup_delay` is not expired.

The `wal_cleanup_delay` should be set to:

 - `0` to disable the cleanup delay;
 - `>= 0` to wait for specified number of seconds.

By default it is set to `14400` seconds (ie `4` hours).

In case if registered replica is lost forever and timeout is set to
infinity then a preferred way to enable cleanup procedure is not setting
up a small timeout value but rather to delete this replica from `_cluster`
space manually.

Note that the option does *not* prevent WAL engine from removing
old `*.xlog` files if there is no space left on a storage device,
WAL engine can remove them in a force way.

Current state of `*.xlog` garbage collector can be found in
`box.info.gc()` output. For example

``` Lua
 tarantool> box.info.gc()
 ---
   ...
   is_paused: false
```

The `is_paused` shows if cleanup fiber is paused or not.
---
 .../unreleased/add-wal_cleanup_delay.md       |  5 +
 src/box/box.cc                                | 41 ++++++++
 src/box/box.h                                 |  1 +
 src/box/gc.c                                  | 95 ++++++++++++++++++-
 src/box/gc.h                                  | 36 +++++++
 src/box/lua/cfg.cc                            |  9 ++
 src/box/lua/info.c                            |  4 +
 src/box/lua/load_cfg.lua                      |  5 +
 src/box/relay.cc                              |  1 +
 src/box/replication.cc                        |  2 +
 test/app-tap/init_script.result               |  1 +
 test/box/admin.result                         |  2 +
 test/box/cfg.result                           |  4 +
 test/replication/replica_rejoin.lua           | 22 +++++
 test/replication/replica_rejoin.result        | 18 +++-
 test/replication/replica_rejoin.test.lua      | 11 ++-
 test/vinyl/replica_rejoin.lua                 |  5 +-
 test/vinyl/replica_rejoin.result              | 13 +++
 test/vinyl/replica_rejoin.test.lua            |  8 ++
 19 files changed, 275 insertions(+), 8 deletions(-)
 create mode 100644 changelogs/unreleased/add-wal_cleanup_delay.md
 create mode 100644 test/replication/replica_rejoin.lua

diff --git a/changelogs/unreleased/add-wal_cleanup_delay.md b/changelogs/unreleased/add-wal_cleanup_delay.md
new file mode 100644
index 000000000..2e67f0a4e
--- /dev/null
+++ b/changelogs/unreleased/add-wal_cleanup_delay.md
@@ -0,0 +1,5 @@
+## bugfix/core
+
+* Introduce `wal_cleanup_delay` option to prevent early cleanup
+  of `*.xlog` files which are needed by replicas and lead to
+  `XlogGapError` (gh-5806).
diff --git a/src/box/box.cc b/src/box/box.cc
index cc59564e1..e69b7b2ff 100644
--- a/src/box/box.cc
+++ b/src/box/box.cc
@@ -771,6 +771,19 @@ box_check_wal_queue_max_size(void)
 	return size;
 }
 
+static double
+box_check_wal_cleanup_delay(void)
+{
+	double value = cfg_getd("wal_cleanup_delay");
+	if (value < 0) {
+		diag_set(ClientError, ER_CFG, "wal_cleanup_delay",
+			 "value must be >= 0");
+		return -1;
+	}
+
+	return value;
+}
+
 static void
 box_check_readahead(int readahead)
 {
@@ -918,6 +931,8 @@ box_check_config(void)
 	box_check_wal_mode(cfg_gets("wal_mode"));
 	if (box_check_wal_queue_max_size() < 0)
 		diag_raise();
+	if (box_check_wal_cleanup_delay() < 0)
+		diag_raise();
 	if (box_check_memory_quota("memtx_memory") < 0)
 		diag_raise();
 	box_check_memtx_min_tuple_size(cfg_geti64("memtx_min_tuple_size"));
@@ -1465,6 +1480,23 @@ box_set_wal_queue_max_size(void)
 	return 0;
 }
 
+int
+box_set_wal_cleanup_delay(void)
+{
+	double delay = box_check_wal_cleanup_delay();
+	if (delay < 0)
+		return -1;
+	/*
+	 * Anonymous replicas do not require
+	 * delay since they can't be a source
+	 * of replication.
+	 */
+	if (replication_anon)
+		delay = 0;
+	gc_set_wal_cleanup_delay(delay);
+	return 0;
+}
+
 void
 box_set_vinyl_memory(void)
 {
@@ -3076,6 +3108,15 @@ box_cfg_xc(void)
 	}
 	fiber_gc();
 
+	/*
+	 * Exclude self from GC delay because we care
+	 * about remote replicas only, still for ref/unref
+	 * balance we do reference self node initially and
+	 * downgrade it to zero when there is no replication
+	 * set at all.
+	 */
+	gc_delay_unref();
+
 	bootstrap_journal_guard.is_active = false;
 	assert(current_journal != &bootstrap_journal);
 
diff --git a/src/box/box.h b/src/box/box.h
index 65215b087..e2321b9b0 100644
--- a/src/box/box.h
+++ b/src/box/box.h
@@ -243,6 +243,7 @@ void box_set_checkpoint_count(void);
 void box_set_checkpoint_interval(void);
 void box_set_checkpoint_wal_threshold(void);
 int box_set_wal_queue_max_size(void);
+int box_set_wal_cleanup_delay(void);
 void box_set_memtx_memory(void);
 void box_set_memtx_max_tuple_size(void);
 void box_set_vinyl_memory(void);
diff --git a/src/box/gc.c b/src/box/gc.c
index 9af4ef958..10f899923 100644
--- a/src/box/gc.c
+++ b/src/box/gc.c
@@ -107,6 +107,11 @@ gc_init(void)
 	/* Don't delete any files until recovery is complete. */
 	gc.min_checkpoint_count = INT_MAX;
 
+	gc.wal_cleanup_delay = TIMEOUT_INFINITY;
+	gc.delay_ref = 0;
+	gc.is_paused = true;
+	say_info("wal/engine cleanup is paused");
+
 	vclock_create(&gc.vclock);
 	rlist_create(&gc.checkpoints);
 	gc_tree_new(&gc.consumers);
@@ -238,6 +243,51 @@ static int
 gc_cleanup_fiber_f(va_list ap)
 {
 	(void)ap;
+
+	/*
+	 * Stage 1 (optional): in case if we're booting
+	 * up with cleanup disabled lets do wait in a
+	 * separate cycle to minimize branching on stage 2.
+	 */
+	if (gc.is_paused) {
+		double start_time = fiber_clock();
+		double timeout = gc.wal_cleanup_delay;
+		while (!fiber_is_cancelled()) {
+			if (fiber_yield_timeout(timeout)) {
+				say_info("wal/engine cleanup is resumed "
+					 "due to timeout expiration");
+				gc.is_paused = false;
+				gc.delay_ref = 0;
+				break;
+			}
+
+			/*
+			 * If a last reference is dropped
+			 * we can exit out early.
+			 */
+			if (!gc.is_paused) {
+				say_info("wal/engine cleanup is resumed");
+				break;
+			}
+
+			/*
+			 * Woken up to update the timeout.
+			 */
+			double elapsed = fiber_clock() - start_time;
+			if (elapsed >= gc.wal_cleanup_delay) {
+				say_info("wal/engine cleanup is resumed "
+					 "due to timeout manual update");
+				gc.is_paused = false;
+				gc.delay_ref = 0;
+				break;
+			}
+			timeout = gc.wal_cleanup_delay - elapsed;
+		}
+	}
+
+	/*
+	 * Stage 2: a regular cleanup cycle.
+	 */
 	while (!fiber_is_cancelled()) {
 		int64_t delta = gc.cleanup_scheduled - gc.cleanup_completed;
 		if (delta == 0) {
@@ -253,6 +303,42 @@ gc_cleanup_fiber_f(va_list ap)
 	return 0;
 }
 
+void
+gc_set_wal_cleanup_delay(double wal_cleanup_delay)
+{
+	gc.wal_cleanup_delay = wal_cleanup_delay;
+	/*
+	 * This routine may be called at arbitrary
+	 * moment thus we must be sure the cleanup
+	 * fiber is paused to not wake up it when
+	 * it is already in a regular cleanup stage.
+	 */
+	if (gc.is_paused)
+		fiber_wakeup(gc.cleanup_fiber);
+}
+
+void
+gc_delay_ref(void)
+{
+	if (gc.is_paused) {
+		assert(gc.delay_ref >= 0);
+		gc.delay_ref++;
+	}
+}
+
+void
+gc_delay_unref(void)
+{
+	if (gc.is_paused) {
+		assert(gc.delay_ref > 0);
+		gc.delay_ref--;
+		if (gc.delay_ref == 0) {
+			gc.is_paused = false;
+			fiber_wakeup(gc.cleanup_fiber);
+		}
+	}
+}
+
 /**
  * Trigger asynchronous garbage collection.
  */
@@ -462,11 +548,12 @@ gc_checkpoint(void)
 	 * Wait for background garbage collection that might
 	 * have been triggered by this checkpoint to complete.
 	 * Strictly speaking, it isn't necessary, but it
-	 * simplifies testing as it guarantees that by the
-	 * time box.snapshot() returns, all outdated checkpoint
-	 * files have been removed.
+	 * simplifies testing. Same time if GC is paused and
+	 * waiting for old XLOGs to be read by replicas the
+	 * cleanup won't happen immediately after the checkpoint.
 	 */
-	gc_wait_cleanup();
+	if (!gc.is_paused)
+		gc_wait_cleanup();
 	return 0;
 }
 
diff --git a/src/box/gc.h b/src/box/gc.h
index 2a568c5f9..f5bc26e87 100644
--- a/src/box/gc.h
+++ b/src/box/gc.h
@@ -147,6 +147,24 @@ struct gc_state {
 	 * taken at that moment of time.
 	 */
 	int64_t cleanup_completed, cleanup_scheduled;
+	/**
+	 * A counter to wait until all replicas are managed to
+	 * subscribe so that we can enable cleanup fiber to
+	 * remove old XLOGs. Otherwise some replicas might be
+	 * far behind the master node and after the master
+	 * node been restarted they will have to reread all
+	 * data back due to XlogGapError, ie too early deleted
+	 * XLOGs.
+	 */
+	int64_t delay_ref;
+	/**
+	 * Delay timeout in seconds.
+	 */
+	double wal_cleanup_delay;
+	/**
+	 * When set the cleanup fiber is paused.
+	 */
+	bool is_paused;
 	/**
 	 * Set if there's a fiber making a checkpoint right now.
 	 */
@@ -206,6 +224,24 @@ gc_init(void);
 void
 gc_free(void);
 
+/**
+ * Set a new delay value.
+ */
+void
+gc_set_wal_cleanup_delay(double wal_cleanup_delay);
+
+/**
+ * Increment a reference to delay counter.
+ */
+void
+gc_delay_ref(void);
+
+/**
+ * Decrement a reference from the delay counter.
+ */
+void
+gc_delay_unref(void);
+
 /**
  * Advance the garbage collector vclock to the given position.
  * Deactivate WAL consumers that need older data.
diff --git a/src/box/lua/cfg.cc b/src/box/lua/cfg.cc
index b37a93ed8..1142e2726 100644
--- a/src/box/lua/cfg.cc
+++ b/src/box/lua/cfg.cc
@@ -172,6 +172,14 @@ lbox_cfg_set_wal_queue_max_size(struct lua_State *L)
 	return 0;
 }
 
+static int
+lbox_cfg_set_wal_cleanup_delay(struct lua_State *L)
+{
+	if (box_set_wal_cleanup_delay() < 0)
+		luaT_error(L);
+	return 0;
+}
+
 static int
 lbox_cfg_set_read_only(struct lua_State *L)
 {
@@ -408,6 +416,7 @@ box_lua_cfg_init(struct lua_State *L)
 		{"cfg_set_checkpoint_interval", lbox_cfg_set_checkpoint_interval},
 		{"cfg_set_checkpoint_wal_threshold", lbox_cfg_set_checkpoint_wal_threshold},
 		{"cfg_set_wal_queue_max_size", lbox_cfg_set_wal_queue_max_size},
+		{"cfg_set_wal_cleanup_delay", lbox_cfg_set_wal_cleanup_delay},
 		{"cfg_set_read_only", lbox_cfg_set_read_only},
 		{"cfg_set_memtx_memory", lbox_cfg_set_memtx_memory},
 		{"cfg_set_memtx_max_tuple_size", lbox_cfg_set_memtx_max_tuple_size},
diff --git a/src/box/lua/info.c b/src/box/lua/info.c
index c4c9fa0a0..fb39799a1 100644
--- a/src/box/lua/info.c
+++ b/src/box/lua/info.c
@@ -445,6 +445,10 @@ lbox_info_gc_call(struct lua_State *L)
 	lua_pushboolean(L, gc.checkpoint_is_in_progress);
 	lua_settable(L, -3);
 
+	lua_pushstring(L, "is_paused");
+	lua_pushboolean(L, gc.is_paused);
+	lua_settable(L, -3);
+
 	lua_pushstring(L, "checkpoints");
 	lua_newtable(L);
 
diff --git a/src/box/lua/load_cfg.lua b/src/box/lua/load_cfg.lua
index 9967f992e..44bb95ed1 100644
--- a/src/box/lua/load_cfg.lua
+++ b/src/box/lua/load_cfg.lua
@@ -73,6 +73,7 @@ local default_cfg = {
     wal_max_size        = 256 * 1024 * 1024,
     wal_dir_rescan_delay= 2,
     wal_queue_max_size  = 16 * 1024 * 1024,
+    wal_cleanup_delay   = 4 * 3600,
     force_recovery      = false,
     replication         = nil,
     instance_uuid       = nil,
@@ -155,6 +156,7 @@ local template_cfg = {
     wal_mode            = 'string',
     wal_max_size        = 'number',
     wal_dir_rescan_delay= 'number',
+    wal_cleanup_delay   = 'number',
     force_recovery      = 'boolean',
     replication         = 'string, number, table',
     instance_uuid       = 'string',
@@ -289,6 +291,7 @@ local dynamic_cfg = {
     feedback_interval       = ifdef_feedback_set_params,
     -- do nothing, affects new replicas, which query this value on start
     wal_dir_rescan_delay    = function() end,
+    wal_cleanup_delay       = private.cfg_set_wal_cleanup_delay,
     custom_proc_title       = function()
         require('title').update(box.cfg.custom_proc_title)
     end,
@@ -349,6 +352,8 @@ local dynamic_cfg_order = {
     -- the new one. This should be fixed when box.cfg is able to
     -- apply some parameters together and atomically.
     replication_anon        = 250,
+    -- Cleanup delay should be ignored if replication_anon is set.
+    wal_cleanup_delay       = 260,
     election_mode           = 300,
     election_timeout        = 320,
 }
diff --git a/src/box/relay.cc b/src/box/relay.cc
index 41f949e8e..6edee86bf 100644
--- a/src/box/relay.cc
+++ b/src/box/relay.cc
@@ -824,6 +824,7 @@ relay_subscribe(struct replica *replica, int fd, uint64_t sync,
 						   tt_uuid_str(&replica->uuid));
 		if (replica->gc == NULL)
 			diag_raise();
+		gc_delay_unref();
 	}
 
 	relay_start(relay, fd, sync, relay_send_row);
diff --git a/src/box/replication.cc b/src/box/replication.cc
index 1fa8843e7..aefb812b3 100644
--- a/src/box/replication.cc
+++ b/src/box/replication.cc
@@ -250,6 +250,7 @@ replica_set_id(struct replica *replica, uint32_t replica_id)
 						   tt_uuid_str(&replica->uuid));
 	}
 	replicaset.replica_by_id[replica_id] = replica;
+	gc_delay_ref();
 	++replicaset.registered_count;
 	say_info("assigned id %d to replica %s",
 		 replica->id, tt_uuid_str(&replica->uuid));
@@ -273,6 +274,7 @@ replica_clear_id(struct replica *replica)
 	replicaset.replica_by_id[replica->id] = NULL;
 	assert(replicaset.registered_count > 0);
 	--replicaset.registered_count;
+	gc_delay_unref();
 	if (replica->id == instance_id) {
 		/* See replica_check_id(). */
 		assert(replicaset.is_joining);
diff --git a/test/app-tap/init_script.result b/test/app-tap/init_script.result
index 74cdb3efb..1fdd9a227 100644
--- a/test/app-tap/init_script.result
+++ b/test/app-tap/init_script.result
@@ -53,6 +53,7 @@ vinyl_run_count_per_level:2
 vinyl_run_size_ratio:3.5
 vinyl_timeout:60
 vinyl_write_threads:4
+wal_cleanup_delay:14400
 wal_dir:.
 wal_dir_rescan_delay:2
 wal_max_size:268435456
diff --git a/test/box/admin.result b/test/box/admin.result
index b619ae6cb..f8e8808e3 100644
--- a/test/box/admin.result
+++ b/test/box/admin.result
@@ -127,6 +127,8 @@ cfg_filter(box.cfg)
     - 60
   - - vinyl_write_threads
     - 4
+  - - wal_cleanup_delay
+    - 14400
   - - wal_dir
     - <hidden>
   - - wal_dir_rescan_delay
diff --git a/test/box/cfg.result b/test/box/cfg.result
index 2c3d5a981..693c1b521 100644
--- a/test/box/cfg.result
+++ b/test/box/cfg.result
@@ -115,6 +115,8 @@ cfg_filter(box.cfg)
  |     - 60
  |   - - vinyl_write_threads
  |     - 4
+ |   - - wal_cleanup_delay
+ |     - 14400
  |   - - wal_dir
  |     - <hidden>
  |   - - wal_dir_rescan_delay
@@ -234,6 +236,8 @@ cfg_filter(box.cfg)
  |     - 60
  |   - - vinyl_write_threads
  |     - 4
+ |   - - wal_cleanup_delay
+ |     - 14400
  |   - - wal_dir
  |     - <hidden>
  |   - - wal_dir_rescan_delay
diff --git a/test/replication/replica_rejoin.lua b/test/replication/replica_rejoin.lua
new file mode 100644
index 000000000..76f6e5b75
--- /dev/null
+++ b/test/replication/replica_rejoin.lua
@@ -0,0 +1,22 @@
+#!/usr/bin/env tarantool
+
+local repl_include_self = arg[1] and arg[1] == 'true' or false
+local repl_list
+
+if repl_include_self then
+    repl_list = {os.getenv("MASTER"), os.getenv("LISTEN")}
+else
+    repl_list = os.getenv("MASTER")
+end
+
+-- Start the console first to allow test-run to attach even before
+-- box.cfg is finished.
+require('console').listen(os.getenv('ADMIN'))
+
+box.cfg({
+    listen              = os.getenv("LISTEN"),
+    replication         = repl_list,
+    memtx_memory        = 107374182,
+    replication_timeout = 0.1,
+    wal_cleanup_delay   = 0,
+})
diff --git a/test/replication/replica_rejoin.result b/test/replication/replica_rejoin.result
index 4bc3df2ca..074cc3e67 100644
--- a/test/replication/replica_rejoin.result
+++ b/test/replication/replica_rejoin.result
@@ -14,6 +14,13 @@ test_run:cleanup_cluster()
 ---
 ...
 --
+-- gh-5806: this replica_rejoin test relies on the wal cleanup fiber
+-- been disabled thus lets turn it off explicitly every time we restart
+-- the main node.
+box.cfg{wal_cleanup_delay = 0}
+---
+...
+--
 -- gh-461: check that a replica refetches the last checkpoint
 -- in case it fell behind the master.
 --
@@ -36,7 +43,7 @@ _ = box.space.test:insert{3}
 ---
 ...
 -- Join a replica, then stop it.
-test_run:cmd("create server replica with rpl_master=default, script='replication/replica.lua'")
+test_run:cmd("create server replica with rpl_master=default, script='replication/replica_rejoin.lua'")
 ---
 - true
 ...
@@ -69,6 +76,9 @@ test_run:cmd("stop server replica")
 -- Restart the server to purge the replica from
 -- the garbage collection state.
 test_run:cmd("restart server default")
+box.cfg{wal_cleanup_delay = 0}
+---
+...
 -- Make some checkpoints to remove old xlogs.
 checkpoint_count = box.cfg.checkpoint_count
 ---
@@ -190,6 +200,9 @@ test_run:cmd("stop server replica")
 - true
 ...
 test_run:cmd("restart server default")
+box.cfg{wal_cleanup_delay = 0}
+---
+...
 checkpoint_count = box.cfg.checkpoint_count
 ---
 ...
@@ -313,6 +326,9 @@ test_run:cmd("switch default")
 - true
 ...
 test_run:cmd("restart server default")
+box.cfg{wal_cleanup_delay = 0}
+---
+...
 replica_listen = test_run:cmd("eval replica 'return box.cfg.listen'")
 ---
 ...
diff --git a/test/replication/replica_rejoin.test.lua b/test/replication/replica_rejoin.test.lua
index 494cbbcb7..223316d86 100644
--- a/test/replication/replica_rejoin.test.lua
+++ b/test/replication/replica_rejoin.test.lua
@@ -5,6 +5,12 @@ engine = test_run:get_cfg('engine')
 
 test_run:cleanup_cluster()
 
+--
+-- gh-5806: this replica_rejoin test relies on the wal cleanup fiber
+-- been disabled thus lets turn it off explicitly every time we restart
+-- the main node.
+box.cfg{wal_cleanup_delay = 0}
+
 --
 -- gh-461: check that a replica refetches the last checkpoint
 -- in case it fell behind the master.
@@ -17,7 +23,7 @@ _ = box.space.test:insert{2}
 _ = box.space.test:insert{3}
 
 -- Join a replica, then stop it.
-test_run:cmd("create server replica with rpl_master=default, script='replication/replica.lua'")
+test_run:cmd("create server replica with rpl_master=default, script='replication/replica_rejoin.lua'")
 test_run:cmd("start server replica with args='true'")
 test_run:cmd("switch replica")
 box.info.replication[1].upstream.status == 'follow' or log.error(box.info)
@@ -28,6 +34,7 @@ test_run:cmd("stop server replica")
 -- Restart the server to purge the replica from
 -- the garbage collection state.
 test_run:cmd("restart server default")
+box.cfg{wal_cleanup_delay = 0}
 
 -- Make some checkpoints to remove old xlogs.
 checkpoint_count = box.cfg.checkpoint_count
@@ -72,6 +79,7 @@ box.space.test:replace{1, 2, 3} -- bumps LSN on the replica
 test_run:cmd("switch default")
 test_run:cmd("stop server replica")
 test_run:cmd("restart server default")
+box.cfg{wal_cleanup_delay = 0}
 checkpoint_count = box.cfg.checkpoint_count
 box.cfg{checkpoint_count = 1}
 for i = 1, 3 do box.space.test:delete{i * 10} end
@@ -116,6 +124,7 @@ _ = test_run:wait_vclock('default', vclock)
 -- Restart the master and force garbage collection.
 test_run:cmd("switch default")
 test_run:cmd("restart server default")
+box.cfg{wal_cleanup_delay = 0}
 replica_listen = test_run:cmd("eval replica 'return box.cfg.listen'")
 replica_listen ~= nil
 box.cfg{replication = replica_listen}
diff --git a/test/vinyl/replica_rejoin.lua b/test/vinyl/replica_rejoin.lua
index 7cb7e09a4..f97209c44 100644
--- a/test/vinyl/replica_rejoin.lua
+++ b/test/vinyl/replica_rejoin.lua
@@ -6,8 +6,9 @@ if arg[1] == 'disable_replication' then
 end
 
 box.cfg({
-    replication     = replication,
-    vinyl_memory    = 1024 * 1024,
+    replication         = replication,
+    vinyl_memory        = 1024 * 1024,
+    wal_cleanup_delay   = 0,
 })
 
 require('console').listen(os.getenv('ADMIN'))
diff --git a/test/vinyl/replica_rejoin.result b/test/vinyl/replica_rejoin.result
index 6e8156fee..cb38eaee7 100644
--- a/test/vinyl/replica_rejoin.result
+++ b/test/vinyl/replica_rejoin.result
@@ -5,6 +5,13 @@ test_run = env.new()
 ---
 ...
 --
+-- gh-5806: this replica_rejoin test relies on the wal cleanup fiber
+-- been disabled thus lets turn it off explicitly every time we restart
+-- the main node.
+box.cfg{wal_cleanup_delay = 0}
+---
+...
+--
 -- gh-461: check that garbage collection works as expected
 -- after rebootstrap.
 --
@@ -54,6 +61,9 @@ test_run:cmd("stop server replica")
 ...
 -- Invoke garbage collector on the master.
 test_run:cmd("restart server default")
+box.cfg{wal_cleanup_delay = 0}
+---
+...
 checkpoint_count = box.cfg.checkpoint_count
 ---
 ...
@@ -123,6 +133,9 @@ test_run:cmd("stop server replica")
 ...
 -- Invoke garbage collector on the master.
 test_run:cmd("restart server default")
+box.cfg{wal_cleanup_delay = 0}
+---
+...
 checkpoint_count = box.cfg.checkpoint_count
 ---
 ...
diff --git a/test/vinyl/replica_rejoin.test.lua b/test/vinyl/replica_rejoin.test.lua
index cbb17ef21..f52859121 100644
--- a/test/vinyl/replica_rejoin.test.lua
+++ b/test/vinyl/replica_rejoin.test.lua
@@ -1,6 +1,12 @@
 env = require('test_run')
 test_run = env.new()
 
+--
+-- gh-5806: this replica_rejoin test relies on the wal cleanup fiber
+-- been disabled thus lets turn it off explicitly every time we restart
+-- the main node.
+box.cfg{wal_cleanup_delay = 0}
+
 --
 -- gh-461: check that garbage collection works as expected
 -- after rebootstrap.
@@ -23,6 +29,7 @@ test_run:cmd("stop server replica")
 
 -- Invoke garbage collector on the master.
 test_run:cmd("restart server default")
+box.cfg{wal_cleanup_delay = 0}
 checkpoint_count = box.cfg.checkpoint_count
 box.cfg{checkpoint_count = 1}
 box.space.test:delete(1)
@@ -48,6 +55,7 @@ test_run:cmd("stop server replica")
 
 -- Invoke garbage collector on the master.
 test_run:cmd("restart server default")
+box.cfg{wal_cleanup_delay = 0}
 checkpoint_count = box.cfg.checkpoint_count
 box.cfg{checkpoint_count = 1}
 box.space.test:delete(2)
-- 
2.30.2



More information about the Tarantool-patches mailing list