[Tarantool-patches] [PATCH v2 5/6] Add luacheck config

Mon Apr 13 18:16:01 MSK 2020

Vlad, thanks for review. See comments inline.

On 18:54 Sat 11 Apr , Vladislav Shpilevoy wrote:
> Thanks for the patch!
> 
> See 5 comments below.
> 
> On 08/04/2020 17:43, Sergey Bronnikov wrote:
> > From: Sergey Bronnikov <sergeyb at tarantool.org>
> > 
> > From the beginning we haven't use static analysis for Lua source code and
> > therefore now we have about 32k warnings and errors produced by luacheck. Sure
> > these issues are not real bugs but fixing them will make source code better and
> > clear. Aim to fix all of them at once looks insane and perhaps it is not worth
> > it.
> > 
> > Summary of static analysis:
> > 
> > There were no errors found by luacheck in production source code (src/),
> > many warnings were fixed in previous commits and non-interested warnings were
> > supressed using luacheck config.
> > 
> > Lua source code in test/ directory contains both errors and warnings and there
> > are a lot of them. Some of these warnings were fixed by previous commits and
> > most part of warnings and errors supressed in luacheck config. Regarding
> > errors: all found errors belongs to a single error class - "Syntax error"
> > (E011). All of them have a single root cause - at the of testscases we write
> > conditions without assignments and it is confuses luacheck. Usually such
> > conditions used together with asserts, but in our tests we uses reference outputs
> > instead of asserts.
> 
> 1. So you disabled that warning for tests, right? Then why still many
> statements in the test/ dir are replaced with assertions in one of the
> previous commits?

My original goal was following: fix dangerous warnings and supress other
of them per file. I followed this strategy and then discovered that E011
cannot be supressed. In case of errors you should fix them or disable
checking at all for highlighted files/directories. So this is a reason
why some exclusions contains single file and some of them contains file
mask. I decided to keep it as is because more specific supressions are
more convenient to fix when.

> > How-to check:
> > 
> > $ tarantoolctl rocks install luacheck
> > $ .rocks/bin/luacheck --codes --config .luacheckrc .
> > 
> > Closes #4681
> > ---
> >  .luacheckrc | 162 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 162 insertions(+)
> >  create mode 100644 .luacheckrc
> > 
> > diff --git a/.luacheckrc b/.luacheckrc
> > new file mode 100644
> > index 000000000..2550f9f1a
> > --- /dev/null
> > +++ b/.luacheckrc
> > @@ -0,0 +1,162 @@
> > +include_files = {
> > +    "**/*.lua",
> > +    "extra/dist/tarantoolctl.in",
> > +}
> > +
> > +exclude_files = {
> > +    "third_party/**/*.lua",
> > +    "test-run/**/*.lua",
> > +    "test/wal_off/*.lua", -- E011
> > +    "test/xlog/*.lua", -- E011
> > +    "test/vinyl/*.lua", -- E011
> > +    "test/sql/*.lua", -- E011
> > +    "test/replication/*.lua", -- E011
> > +    "test/engine/*.lua", -- E011
> > +    "test/swim/*.lua", -- E011
> > +    "test/box/*.lua", -- E011
> > +    "test/app/*.lua", -- E011
> > +    "test/app-tap/*.lua", -- E011
> 
> 2. In tap tests there is no print of every line's statement.
> So if there is a warning about an unused statement in a tap
> test, it should be ok to remove/fix it.

Enabled app-tap directory back and keep only test/app-tap/lua/serializer_test.lua
due to error E011: test/app-tap/lua/serializer_test.lua:254:18: (E011) expected expression near 'М'
No idea how to fix it.

> > +    "test/app-tap/lua/serializer_test.lua", -- E011
> > +    "build/**/*.lua",
> > +    ".rocks/**/*.lua",
> > +    ".git/**/*.lua",
> > +}
> 
> 3. Please, add test/var too. When tests are run, they leave lots
> of lua files in there, which are copied from ignored folders, but
> they become not ignored in test/var.

Added.

> > +
> > +files["**/*.lua"] = {ignore = {"212", "122"}}
> 
> 4. Shouldn't that disable 212 and 122 for all lua files? If so,
> then why still 122 is mentioned in the lists below? (Not counting
> tarantoolctl.in, it does not have .lua suffix).

Removed these warnings from warning sets per file.

> > +files["extra/dist/tarantoolctl.in"] = {ignore = {"431", "411", "122", "542"}}
> > +files["src/lua/help.lua"] = {globals = {"help", "tutorial"}, ignore = {"113", "211"}}
> > +files["src/lua/swim.lua"] = {ignore = {"431"}}
> > +files["src/lua/fio.lua"] = {ignore = {"231"}}
> > +files["src/lua/init.lua"] = {ignore = {"122", "121"}}
> > +files["src/lua/fiber.lua"] = {ignore = {"331", "311"}}
> > +files["src/box/lua/serpent.lua"] = {globals = {"_ENV"}, ignore = {"431", "421", "631", "432", "542", "412", "422"}}
> > +files["src/box/lua/load_cfg.lua"] = {ignore = {"431", "143", "311", "542"}}
> > +files["src/box/lua/net_box.lua"] = {ignore = {"431", "211", "421", "432", "311", "231", "411", "412"}}
> > +files["src/box/lua/schema.lua"] = {globals = {"update_format", "iid", "role_check_grant_revoke_of_sys_priv"}, ignore = {"431", "122", "211", "421", "213", "432", "311", "542", "412"}}
> > +files["src/box/lua/key_def.lua"] = {ignore = {"431"}}
> > +files["src/box/lua/feedback_daemon.lua"] = {ignore = {"122", "211"}}
> > +files["src/box/lua/tuple.lua"] = {ignore = {"122", "211", "421", "412"}}
> > +files["src/box/lua/upgrade.lua"] = {ignore = {"122", "211", "421", "213"}}
> > +files["src/box/lua/console.lua"] = {globals = {"help"}, ignore = {"211", "143"}}
> > +files["test/**/*.lua"] = {ignore = {"631", "611", "614", "613", "612", "621", "112", "211", "432"}}
> > +files["test/app/*.lua"] = {ignore = {"111", "113"}}
> > +files["test/app/lua/fiber.lua"] = {ignore = {"111"}}
> > +files["test/app-tap/*.lua"] = {ignore = {"111", "113"}}
> > +files["test/app-tap/tarantoolctl.test.lua"] = {ignore = {"511"}}
> > +files["test/app-tap/lua/require_mod.lua"] = {ignore = {"113", "111"}}
> > +files["test/box/admin.test.lua"] = {ignore = {"213"}}
> > +files["test/box/lua/*.lua"] = {ignore = {"111"}}
> > +files["test/box/*.lua"] = {ignore = {"111", "113"}}
> > +files["test/box/lua/utils.lua"] = {ignore = {"421", "113", "213", "412"}}
> > +files["test/box/lua/bitset.lua"] = {ignore = {"113", "213"}}
> > +files["test/box/lua/fifo.lua"] = {ignore = {"113", "213"}}
> > +files["test/box/lua/identifier.lua"] = {ignore = {"113"}}
> > +files["test/box/lua/require_mod.lua"] = {ignore = {"113"}}
> > +files["test/box/lua/require_init.lua"] = {ignore = {"412", "143"}}
> > +files["test/box/lua/test_init.lua"] = {ignore = {"113", "412", "143"}}
> > +files["test/box/lua/index_random_test.lua"] = {ignore = {"213"}}
> > +files["test/box-tap/*.lua"] = {ignore = {"111"}}
> > +files["test/box-tap/auth.test.lua"] = {ignore = {"311", "411", "113"}}
> > +files["test/box-tap/cfg.test.lua"] = {ignore = {"311", "411", "113"}}
> > +files["test/box-tap/cfgup.test.lua"] = {ignore = {"113"}}
> > +files["test/box-tap/feedback_daemon.test.lua"] = {ignore = {"411"}}
> > +files["test/box-tap/gc.test.lua"] = {ignore = {"421"}}
> > +files["test/box-tap/on_schema_init.test.lua"] = {ignore = {"113"}}
> > +files["test/box-tap/schema_mt.test.lua"] = {ignore = {"113", "122"}}
> > +files["test/box-tap/key_def.test.lua"] = {ignore = {"411", "431"}}
> > +files["test/box-tap/merger.test.lua"] = {ignore = {"411", "431", "412", "213"}}
> > +files["test/box-tap/session.storage.test.lua"] = {ignore = {"113"}}
> > +files["test/box-tap/session.test.lua"] = {ignore = {"411", "113", "412", "143"}}
> > +files["test/box-tap/trigger_atexit.test.lua"] = {ignore = {"113"}}
> > +files["test/box-tap/trigger_yield.test.lua"] = {ignore = {"213", "113"}}
> > +files["test/luajit-tap/fix_string_find_recording.test.lua"] = {ignore = {"111", "113", "231"}}
> > +files["test/luajit-tap/gh-4476-fix-string-find-recording.test.lua"] = {ignore = {"231"}}
> > +files["test/luajit-tap/fold_bug_LuaJIT_505.test.lua"] = {ignore = {"111", "113"}}
> > +files["test/luajit-tap/gh.test.lua"] = {ignore = {"111", "113"}}
> > +files["test/luajit-tap/table_chain_bug_LuaJIT_494.test.lua"] = {ignore = {"111", "113"}}
> > +files["test/luajit-tap/unsink_64_kptr.test.lua"] = {ignore = {"111", "113", "551", "542"}}
> > +files["test/luajit-tap/or-232-unsink-64-kptr.test.lua"] = {ignore = {"542"}}
> > +files["test/luajit-tap/lj-494-table-chain-infinite-loop.test.lua"] = {ignore = {"111", "113", "213"}}
> > +files["test/engine/*.lua"] = {ignore = {"111", "113"}}
> > +files["test/engine_long/suite.lua"] = {ignore = {"421", "111", "213"}}
> > +files["test/engine_long/delete_replace_update.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/engine_long/delete_insert.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/long_run-py/suite.lua"] = {ignore = {"421", "111", "113", "213"}}
> > +files["test/long_run-py/lua/finalizers.lua"] = {ignore = {"241", "511", "111", "113"}}
> > +files["test/replication/*.lua"] = {ignore = {"113", "111"}}
> > +files["test/replication/lua/fast_replica.lua"] = {ignore = {"113", "213"}}
> > +files["test/replication/lua/rlimit.lua"] = {ignore = {"113"}}
> > +files["test/replication-py/replica.lua"] = {ignore = {"111"}}
> > +files["test/replication/lua/fast_replica.lua"] = {ignore = {"113", "111", "213"}}
> > +files["test/replication/lua/rlimit.lua"] = {ignore = {"113", "111"}}
> > +files["test/sql/*.lua"] = {ignore = {"113", "111"}}
> > +files["test/sql/triggers.test.lua"] = {ignore = {"631", "113", "111"}}
> > +files["test/sql/tokenizer.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/sql/transitive-transactions.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/sql/savepoints.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/sql/persistency.test.lua"] = {ignore = {"113", "111"}}
> 
> 5. I see that you added some folders to 'exclude_files'. Why is it still
> needed to add files from these folders here?

Explained in answer to the first comment.

> > +files["test/sql-tap/*.lua"] = {ignore = {"113", "111"}}
> > +files["test/sql-tap/lua_sql.test.lua"] = {ignore = {"412"}}
> > +files["test/sql-tap/subquery.test.lua"] = {ignore = {"412", "143"}}
> > +files["test/sql-tap/alias.test.lua"] = {ignore = {"412", "143"}}
> > +files["test/sql-tap/analyze9.test.lua"] = {ignore = {"213", "411"}}
> > +files["test/sql-tap/between.test.lua"] = {ignore = {"421", "213"}}
> > +files["test/sql-tap/check.test.lua"] = {ignore = {"412", "143"}}
> > +files["test/sql-tap/date.test.lua"] = {ignore = {"511"}}
> > +files["test/sql-tap/e_expr.test.lua"] = {ignore = {"512", "431", "213", "411"}}
> > +files["test/sql-tap/func.test.lua"] = {ignore = {"412", "143"}}
> > +files["test/sql-tap/func5.test.lua"] = {ignore = {"412", "143"}}
> > +files["test/sql-tap/misc1.test.lua"] = {ignore = {"411"}}
> > +files["test/sql-tap/select1.test.lua"] = {ignore = {"511", "213"}}
> > +files["test/sql-tap/select2.test.lua"] = {ignore = {"421"}}
> > +files["test/sql-tap/select4.test.lua"] = {ignore = {"421"}}
> > +files["test/sql-tap/select5.test.lua"] = {ignore = {"421"}}
> > +files["test/sql-tap/selectA.test.lua"] = {ignore = {"542"}}
> > +files["test/sql-tap/selectB.test.lua"] = {ignore = {"213", "542"}}
> > +files["test/sql-tap/selectG.test.lua"] = {ignore = {"421"}}
> > +files["test/sql-tap/table.test.lua"] = {ignore = {"511"}}
> > +files["test/sql-tap/tkt-bd484a090c.test.lua"] = {ignore = {"511"}}
> > +files["test/sql-tap/tkt-38cb5df375.test.lua"] = {ignore = {"421"}}
> > +files["test/sql-tap/tkt-91e2e8ba6f.test.lua"] = {ignore = {"542"}}
> > +files["test/sql-tap/tkt-9a8b09f8e6.test.lua"] = {ignore = {"542"}}
> > +files["test/sql-tap/tkt2192.test.lua"] = {ignore = {"511"}}
> > +files["test/sql-tap/tkt3493.test.lua"] = {ignore = {"542"}}
> > +files["test/sql-tap/triggerA.test.lua"] = {ignore = {"311"}}
> > +files["test/sql-tap/trigger2.test.lua"] = {ignore = {"213"}}
> > +files["test/sql-tap/trigger9.test.lua"] = {ignore = {"143", "412"}}
> > +files["test/sql-tap/update.test.lua"] = {ignore = {"611"}}
> > +files["test/sql-tap/whereB.test.lua"] = {ignore = {"611"}}
> > +files["test/sql-tap/with1.test.lua"] = {ignore = {"542"}}
> > +files["test/sql-tap/with2.test.lua"] = {ignore = {"213", "412"}}
> > +files["test/sql-tap/lua_sql.test.lua"] = {ignore = {"143"}}
> > +files["test/sql-tap/lua/sqltester.lua"] = {ignore = {"111", "113", "431", "213"}}
> > +files["test/sql-tap/gh-2723-concurrency.test.lua"] = {ignore = {"213"}}
> > +files["test/sql-tap/gh-3307-xfer-optimization-issue.test.lua"] = {ignore = {"412", "213"}}
> > +files["test/sql-tap/gh-3083-ephemeral-unref-tuples.test.lua"] = {ignore = {"213"}}
> > +files["test/sql-tap/gh-3332-tuple-format-leak.test.lua"] = {ignore = {"213"}}
> > +files["test/sql-tap/gh2127-indentifier-max-length.test.lua"] = {ignore = {"213"}}
> > +files["test/sql-tap/misc5.test.lua"] = {ignore = {"213"}}
> > +files["test/wal_off/rtree_benchmark.test.lua"] = {ignore = {"213", "113", "111"}}
> > +files["test/wal_off/func_max.test.lua"] = {ignore = {"511", "113", "111"}}
> > +files["test/vinyl/upgrade/fill.lua"] = {ignore = {"111", "113"}}
> > +files["test/vinyl/write_iterator_rand.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/vinyl/savepoint.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/vinyl/replica_quota.test.lua"] = {ignore = {"113", "111", "213"}}
> > +files["test/vinyl/stress.test.lua"] = {ignore = {"431", "213"}}
> > +files["test/vinyl/hermitage.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/vinyl/dump_stress.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/vinyl/constraint.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/vinyl/large.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/vinyl/options.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/xlog/upgrade/2.1.3/gh-4771-upgrade-sequence/fill.lua"] = {ignore = {"111", "113"}}
> > +files["test/xlog/transaction.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/xlog/snap_io_rate.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/xlog/reader.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/xlog/panic_on_broken_lsn.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/xlog/gh1433.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/xlog/header.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/xlog/errinj.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/xlog/force_recovery.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/xlog/big_tx.test.lua"] = {ignore = {"113", "111"}}
> > +files["test/xlog/checkpoint_threshold.test.lua"] = {ignore = {"113", "111", "213"}}
> > +files["test/swim/box.lua"] = {ignore = {"113", "111"}}
> > 

-- 
sergeyb@