[tarantool-patches] [PATCH v2] xlog: add request details to panic message for broken LSN
Vladimir Davydov
vdavydov.dev at gmail.com
Mon Aug 27 20:04:07 MSK 2018
On Mon, Aug 27, 2018 at 02:22:24PM +0300, Sergei Kalashnikov wrote:
> Aid the debugging of replication issues related to out-of-order
> requests. Adds the details of request/tuple to the diagnostic
> message whenever possible.
>
> Closes #3105
> ---
> https://github.com/tarantool/tarantool/issues/3105
> https://github.com/tarantool/tarantool/commits/ztarvos/gh-3105-log-request-broken-lsn
Please write a brief change log here, after the hyperlinks,
when you re-submit a patch, e.g.
https://www.freelists.org/post/tarantool-patches/PATCH-v3-replication-do-not-ignore-replication-connect-quorum
> diff --git a/src/box/relay.cc b/src/box/relay.cc
> index 138e66d..2d0b651 100644
> --- a/src/box/relay.cc
> +++ b/src/box/relay.cc
> @@ -678,4 +678,12 @@ relay_send_row(struct xstream *stream, struct xrow_header *packet)
> packet->replica_id)) {
> relay_send(relay, packet);
> }
> +#ifndef NDEBUG
You don't really need 'ifndef NDEBUG' here. Please remove.
> + struct errinj *inj = errinj(ERRINJ_RELAY_BREAK_LSN, ERRINJ_INT);
> + if (inj != NULL && packet->lsn == inj->iparam) {
> + relay_send(relay, packet);
> + diag_set(ClientError, ER_INJECTION,
> + "relay broken lsn injection lsn");
There's no point in setting diag here. Please remove. At the same time,
I think it would be useful if you logged the LSN of the row you mangled
with say_warn() or say_error().
Also, IMO the code would be clearer if you modified LSN of the row
before sending it instead of sending two rows.
> + }
> +#endif
> }
> diff --git a/src/box/xlog.c b/src/box/xlog.c
> index d399a72..46cf7ed 100644
> --- a/src/box/xlog.c
> +++ b/src/box/xlog.c
> @@ -1246,6 +1246,14 @@ xlog_write_row(struct xlog *log, const struct xrow_header *packet)
> size_t page_offset = obuf_size(&log->obuf);
> /** encode row into iovec */
> struct iovec iov[XROW_IOVMAX];
> +#ifndef NDEBUG
Again, ifndef and diag aren't really needed here while logging would
probably make sense.
> + struct errinj *inj = errinj(ERRINJ_XLOG_BREAK_LSN, ERRINJ_INT);
> + if (inj != NULL && inj->iparam == packet->lsn) {
> + ((struct xrow_header *)packet)->lsn = inj->iparam - 1;
> + diag_set(ClientError, ER_INJECTION,
> + "xlog broken lsn injection lsn");
> + }
> +#endif
I'd expect to see this error injection in wal.c - xlog_write_row() is
used not only for writing xlogs, but also run and snap files, we don't
want to mangle those.
> /** don't write sync to the disk */
> int iovcnt = xrow_header_encode(packet, 0, iov, 0);
> if (iovcnt < 0) {
> diff --git a/src/box/xrow.h b/src/box/xrow.h
> index 4721670..f7eda91 100644
> --- a/src/box/xrow.h
> +++ b/src/box/xrow.h
> @@ -522,6 +522,35 @@ xrow_to_iovec(const struct xrow_header *row, struct iovec *out);
> void
> xrow_decode_error(struct xrow_header *row);
>
> +/**
> + * Update vclock with the next LSN value for given replica id.
> + * The function will cause panic if the next LSN happens to be
> + * out of order. The details of provided row are included into
> + * diagnostic message.
> + *
> + * @param vclock Vector clock.
> + * @param row Data row.
> + * @return Previous LSN value.
> + */
> +static inline int64_t
> +vclock_follow_xrow(struct vclock* vclock, const struct xrow_header *row)
> +{
> + assert(row);
> + assert(row->replica_id < VCLOCK_MAX);
> + if (row->lsn <= vclock->lsn[row->replica_id]) {
> + struct request req;
> + xrow_decode_dml((struct xrow_header *)row, &req, 0);
xrow_decode_dml() may fail, you should handle it.
> + /* Never confirm LSN out of order. */
> + panic("LSN for %u is used twice or COMMIT order is broken: "
> + "confirmed: %lld, new: %lld, req: %s",
> + (unsigned) row->replica_id,
> + (long long) vclock->lsn[row->replica_id],
> + (long long) row->lsn,
> + request_str(&req));
> + }
> + return vclock_follow(vclock, row->replica_id, row->lsn);
> +}
> +
> #if defined(__cplusplus)
> } /* extern "C" */
>
> diff --git a/test/xlog/log_request_broken_lsn_panic.test.lua b/test/xlog/log_request_broken_lsn_panic.test.lua
The test doesn't pass when run twice in a row:
yes xlog/log_request_broken_lsn_panic.test.lua | head -n 10 | xargs ./test-run.py -j 1 --long
Please fix.
Also, the test name is rather cumbersome IMHO. What about
xlog/panic_on_broken_lsn.test.lua ?
> new file mode 100644
> index 0000000..e0b3295
> --- /dev/null
> +++ b/test/xlog/log_request_broken_lsn_panic.test.lua
> @@ -0,0 +1,78 @@
> +-- Issue 3105: Test logging of request with broken lsn before panicking
> +-- Two cases are covered: Recovery and Initial Join
> +env = require('test_run')
> +test_run = env.new()
> +
> +fio = require('fio')
> +test_run:cmd("setopt delimiter ';'")
> +function grep_file_tail(filepath, bytes, pattern)
> + local fh = fio.open(filepath, {'O_RDONLY'})
> + local size = fh:seek(0, 'SEEK_END')
> + if size < bytes then
> + bytes = size
> + end
> + fh:seek(-bytes, 'SEEK_END')
> + local line = fh:read(bytes)
> + fh:close()
> + return string.match(line, pattern)
> +end;
> +test_run:cmd("setopt delimiter ''");
> +
> +-- Testing case of panic on recovery
> +test_run:cmd('create server replica with script="xlog/panic_replica.lua"')
> +test_run:cmd('start server replica')
> +test_run:switch('replica')
> +
> +box.space._schema:replace{"t0", "v0"}
> +lsn = box.info.vclock[1]
> +box.error.injection.set("ERRINJ_XLOG_BREAK_LSN", lsn + 1)
> +box.space._schema:replace{"t0", "v1"}
> +box.error.injection.set("ERRINJ_XLOG_BREAK_LSN", -1)
> +
> +test_run:switch('default')
> +test_run:cmd('stop server replica')
> +
> +dirname = fio.pathjoin(fio.cwd(), "panic_replica")
> +xlogs = fio.glob(dirname .. "/*.xlog")
> +fio.unlink(xlogs[#xlogs])
> +
> +test_run:cmd('start server replica with crash_expected=True')
> +
> +logpath = fio.pathjoin(fio.cwd(), 'panic_replica.log')
> +
> +-- Check that log contains the mention of broken LSN and the request printout
> +grep_file_tail(logpath, 256, "LSN for 1 is used twice or COMMIT order is broken: confirmed: 1, new: 1, req: {.*}")
> +
> +test_run:cmd('cleanup server replica')
> +test_run:cmd('delete server replica')
> +
> +-- Testing case of panic on initial join
In tarantool the process of joining a new replica consists of two
phases: initial join, when the last checkpoint is sent, and final join,
when xlogs are sent. So this is final join, actually. Let's use phrase
'joining a new replica' in comments to avoid confusion.
> +test_run:cmd('create server leader with script="xlog/replica.lua"')
Why do you need a separate master? Why can't you simply bootstrap a
replica from the default instance? Then you wouldn't need to add the
new script, xlog/panic_replica.lua. I surmise this is because you need
to access box.info.replication below while on the default server the
replica doesn't necessarily have id 2. If this is the reason, then you
might want to look at test_run.cleanup_cluster().
> +test_run:cmd("start server leader")
> +test_run:switch('leader')
> +
> +box.schema.user.grant('guest', 'super')
box.schema.user.grant('guest', 'replication')
> +_ = box.schema.space.create('test')
> +_ = box.space.test:create_index('pk')
> +
> +box.space.test:auto_increment{'v0'}
> +lsn = box.info.vclock[1]
> +box.error.injection.set("ERRINJ_RELAY_BREAK_LSN", lsn + 1)
> +box.space.test:auto_increment{'v1'}
> +
> +test_run:cmd('create server replica with rpl_master=leader, script="xlog/panic_replica.lua"')
> +test_run:cmd('start server replica with crash_expected=True')
> +fiber = require('fiber')
> +while box.info.replication == nil do fiber.sleep(0.001) end
> +while box.info.replication[2].downstream.status ~= "stopped" do fiber.sleep(0.001) end
> +
> +test_run:switch('default')
> +-- Check that log contains the mention of broken LSN and the request printout
> +grep_file_tail(logpath, 256, "LSN for 1 is used twice or COMMIT order is broken: confirmed: 6, new: 6, req: {.*}")
> +
> +test_run:cmd('stop server leader')
> +test_run:cmd('cleanup server leader')
> +test_run:cmd('delete server leader')
> +
> +test_run:cmd('cleanup server replica')
> +test_run:cmd('delete server replica')
More information about the Tarantool-patches
mailing list